Table of Contents
Journal of Oral Implants
Volume 2014 (2014), Article ID 870193, 9 pages
http://dx.doi.org/10.1155/2014/870193
Research Article

Inferior Level of Maxillary Sinus and Cortical Bone Thickness at Maxillary Posterior Quadrant, in Three Different Growth Patterns: 3D-Computed Tomographic Study

1Department of Orthodontics, Yogita Dental College and Hospital, Khed, District Ratnagiri, Maharashtra 415709, India
2“Braces & Implant Clinic”, 202-203, 4th Floor, Vishal Ventila, Near Noble Hospital, Hadapsar, Pune 411028, India
3Department of Orthodontics, Sharad Pawar Dental College, Datta Meghe Institute of Medical Sciences, Wardha, Maharashtra 442004, India

Received 5 September 2014; Accepted 20 November 2014; Published 15 December 2014

Academic Editor: Athanassios Kyrgidis

Copyright © 2014 Pavankumar Janardan Vibhute and Pushkar A. Patil. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. W. E. Roberts, C. L. Nelson, and C. J. Goodacre, “Rigid implant anchorage to close a mandibular first molar extraction site,” Journal of Clinical Orthodontics, vol. 28, no. 12, pp. 693–704, 1994. View at Google Scholar · View at Scopus
  2. M. Umemori, J. Sugawara, H. Mitani, H. Nagasaka, and H. Kawamura, “Skeletal anchorage system for open-bite correction,” American Journal of Orthodontics and Dentofacial Orthopedics, vol. 115, no. 2, pp. 166–174, 1999. View at Google Scholar · View at Scopus
  3. S. Kuroda, A. Katayama, and T. Takano-Yamamoto, “Severe anterior open-bite case treated using titanium screw anchorage,” Angle Orthodontist, vol. 74, no. 4, pp. 558–567, 2004. View at Google Scholar · View at Scopus
  4. A. Costa, M. Raffainl, and B. Melsen, “Miniscrews as orthodontic anchorage: a preliminary report,” The International Journal of Adult Orthodontics and Orthognathic Surgery, vol. 13, no. 3, pp. 201–209, 1998. View at Google Scholar · View at Scopus
  5. E. J. W. Liou, P. H. Chen, Y. C. Wang, and J. C. Y. Lin, “A computed tomographic image study on the thickness of the infrazygomatic crest of the maxilla and its clinical implications for miniscrew insertion,” The American Journal of Orthodontics and Dentofacial Orthopedics, vol. 131, no. 3, pp. 352–356, 2007. View at Publisher · View at Google Scholar · View at Scopus
  6. F. Khoury, “Augmentation of the sinus floor with mandibular bone block and simultaneous implantation: a 6-year clinical investigation,” The International Journal of Oral & Maxillofacial Implants, vol. 14, no. 4, pp. 557–564, 1999. View at Google Scholar · View at Scopus
  7. A. Gracco, S. Tracey, and U. Baciliero, “Miniscrew insertion and the maxillary sinus: an endoscopic evaluation,” Journal of Clinical Orthodontics, vol. 44, no. 7, pp. 439–443, 2010. View at Google Scholar · View at Scopus
  8. T. Deguchi, M. Nasu, K. Murakami, T. Yabuuchi, H. Kamioka, and T. Takano-Yamamoto, “Quantitative evaluation of cortical bone thickness with computed tomographic scanning for orthodontic implants,” The American Journal of Orthodontics and Dentofacial Orthopedics, vol. 129, no. 6, pp. 721.e7–721.e12, 2006. View at Publisher · View at Google Scholar · View at Scopus
  9. R. Adell, U. Lekholm, B. Rockler, and P. I. Branemark, “A 15-year study of osseointegrated implants in the treatment of the edentulous jaw,” International Journal of Oral Surgery, vol. 10, no. 6, pp. 387–416, 1981. View at Publisher · View at Google Scholar · View at Scopus
  10. P. M. Poggio, C. Incorvati, S. Velo, and A. Carano, “‘Safe zones’: a guide for miniscrew positioning in the maxillary and mandibular arch,” Angle Orthodontist, vol. 76, no. 2, pp. 191–197, 2006. View at Google Scholar · View at Scopus
  11. S. Miyawaki, I. Koyama, M. Inoue, K. Mishima, T. Sugahara, and T. Takano-Yamamoto, “Factors associated with the stability of titanium screws placed in the posterior region for orthodontic anchorage,” American Journal of Orthodontics and Dentofacial Orthopedics, vol. 124, no. 4, pp. 373–378, 2003. View at Publisher · View at Google Scholar · View at Scopus
  12. M. A. Schnelle, F. M. Beck, R. M. Jaynes, and S. S. Huja, “A radiographic evaluation of the availability of bone for placement of miniscrews,” Angle Orthodontist, vol. 74, no. 6, pp. 832–837, 2004. View at Google Scholar · View at Scopus
  13. A. Gahleitner, B. Podesser, S. Schick, G. Watzek, and H. Imhof, “Dental CT and orthodontic implants: imaging technique and assessment of available bone volume in the hard palate,” European Journal of Radiology, vol. 51, no. 3, pp. 257–262, 2004. View at Publisher · View at Google Scholar · View at Scopus
  14. T. Ishii, K. Nojima, Y. Nishii, T. Takaki, and H. Yamaguchi, “Evaluation of the implantation position of mini-screws for orthodontic treatment in the maxillary molar area by a micro CT,” The Bulletin of Tokyo Dental College, vol. 45, no. 3, pp. 165–172, 2004. View at Publisher · View at Google Scholar · View at Scopus
  15. C. H. Tweed, “The frankfort-mandibular plane angle in orthodontic diagnosis, classification, treatment planning, and prognosis,” American Journal of Orthodontics and Oral Surgery, vol. 32, no. 4, pp. 175–230, 1946. View at Publisher · View at Google Scholar · View at Scopus
  16. J. Park and H. J. Cho, “Three-dimensional evaluation of interradicular spaces and cortical bone thickness for the placement and initial stability of microimplants in adults,” The American Journal of Orthodontics and Dentofacial Orthopedics, vol. 136, no. 3, pp. 314.e1–314.e12, 2009. View at Publisher · View at Google Scholar · View at Scopus
  17. K. Miyajima, S. Saito, M. Sana, and M. Sakai, “Three-dimensional finite element models and animal studies of the use of mini-screws for orthodontic anchorage,” The Angle Orthodontist, vol. 27, no. 2, pp. 111–115, 2005. View at Google Scholar
  18. M. Dalstra, P. M. Cattaneo, and B. Melsen, “Load transfer of miniscrews for orthodontic anchorage,” Orthodontics, vol. 1, pp. 53–62, 2004. View at Google Scholar
  19. H. M. Frost, “Bone “mass” and the “mechanostat”: a proposal,” Anatomical Record, vol. 219, no. 1, pp. 1–9, 1987. View at Publisher · View at Google Scholar · View at Scopus
  20. H. M. Frost, “Skeletal structural adaptations to mechanical usage (SATMU): 1. Redefining Wolff's law: the bone modeling problem,” Anatomical Record, vol. 226, no. 4, pp. 403–413, 1990. View at Publisher · View at Google Scholar · View at Scopus
  21. H. M. Frost, “Skeletal structural adaptions to mechanical usage (SATMU): 2. Redefining Wolff's law: the remodeling problem,” Anatomical Record, vol. 226, no. 4, pp. 414–422, 1990. View at Publisher · View at Google Scholar · View at Scopus
  22. H. M. Frost, “Wolff's Law and bone's structural adaptations to mechanical usage: an overview for clinicians,” Angle Orthodontist, vol. 64, no. 3, pp. 175–188, 1994. View at Google Scholar · View at Scopus
  23. I. Miyamoto, Y. Tsuboi, E. Wada, H. Suwa, and T. Iizuka, “Influence of cortical bone thickness and implant length on implant stability at the time of surgery—Clinical, prospective, biomechanical, and imaging study,” Bone, vol. 37, no. 6, pp. 776–780, 2005. View at Publisher · View at Google Scholar · View at Scopus
  24. B. Wilmes, C. Rademacher, G. Olthoff, and D. Drescher, “Parameters affecting primary stability of orthodontic mini-implants,” Journal of Orofacial Orthopedics, vol. 67, no. 3, pp. 162–174, 2006. View at Publisher · View at Google Scholar · View at Scopus
  25. B. Wilmes, Y.-Y. Su, and D. Drescher, “Insertion angle impact on primary stability of orthodontic mini-implants,” The Angle Orthodontist, vol. 78, no. 6, pp. 1065–1070, 2008. View at Publisher · View at Google Scholar · View at Scopus
  26. M. Tsunori, M. Mashita, and K. Kasai, “Relationship between facial types and tooth and bone characteristics of the mandible obtained by CT scanning,” Angle Orthodontist, vol. 68, no. 6, pp. 557–562, 1998. View at Google Scholar · View at Scopus
  27. T. Masumoto, I. Hayashi, A. Kawamura, K. Tanaka, and K. Kasai, “Relationships among facial type, buccolingual molar inclination, and cortical bone thickness of the mandible,” European Journal of Orthodontics, vol. 23, no. 1, pp. 15–23, 2001. View at Publisher · View at Google Scholar · View at Scopus
  28. M. Motoyoshi, T. Yoshida, A. Ono, and N. Shimizu, “Effect of cortical bone thickness and implant placement torque on stability of orthodontic mini-implants,” International Journal of Oral and Maxillofacial Implants, vol. 22, no. 5, pp. 779–784, 2007. View at Google Scholar · View at Scopus
  29. H.-J. Kim, H.-S. Yun, H.-D. Park, D.-H. Kim, and Y.-C. Park, “Soft-tissue and cortical-bone thickness at orthodontic implant sites,” The American Journal of Orthodontics and Dentofacial Orthopedics, vol. 130, no. 2, pp. 177–182, 2006. View at Publisher · View at Google Scholar · View at Scopus
  30. C. Luzi, C. Verna, and B. Melsen, “Guidelines for success in placement of orthodontic mini-implants,” Journal of Clinical Orthodontics, vol. 43, no. 1, pp. 39–44, 2009. View at Google Scholar · View at Scopus
  31. E. J. W. Liou, P.-H. Chen, Y.-C. Wang, and J. C.-Y. Lin, “A computed tomographic image study on the thickness of the infrazygomatic crest of the maxilla and its clinical implications for miniscrew insertion,” American Journal of Orthodontics and Dentofacial Orthopedics, vol. 131, no. 3, pp. 352–356, 2007. View at Publisher · View at Google Scholar · View at Scopus
  32. S. Baumgaertel, “Cortical bone thickness and bone depth of the posterior palatal alveolar process for mini-implant insertion in adults,” American Journal of Orthodontics and Dentofacial Orthopedics, vol. 140, no. 6, pp. 806–811, 2011. View at Publisher · View at Google Scholar · View at Scopus
  33. S. Baumgaertel, “Quantitative investigation of palatal bone depth and cortical bone thickness for mini-implant placement in adults,” The American Journal of Orthodontics and Dentofacial Orthopedics, vol. 136, no. 1, pp. 104–108, 2009. View at Publisher · View at Google Scholar · View at Scopus
  34. G. Lemieux, A. Hart, C. Cheretakis et al., “Computed tomographic characterization of mini-implant placement pattern and maximum anchorage force in human cadavers,” The American Journal of Orthodontics and Dentofacial Orthopedics, vol. 140, no. 3, pp. 356–365, 2011. View at Publisher · View at Google Scholar · View at Scopus
  35. D.-H. Kim, J.-W. Lee, K.-S. Cha, and D.-H. Chung, “Consideration of maxillary sinus bone thickness when installing miniscrews,” Korean Journal of Orthodontics, vol. 39, no. 6, pp. 354–361, 2009. View at Publisher · View at Google Scholar · View at Scopus
  36. L. Ardekian, E. Oved-Peleg, E. E. Mactei, and M. Peled, “The clinical significance of sinus membrane perforation during augmentation of the maxillary sinus,” Journal of Oral and Maxillofacial Surgery, vol. 64, no. 2, pp. 277–282, 2006. View at Publisher · View at Google Scholar · View at Scopus
  37. P. I. Brånemark, R. Adell, T. Albrektsson, U. Lekholm, J. Lindström, and B. Rockler, “An experimental and clinical study of osseointegrated implants penetrating the nasal cavity and maxillary sinus,” Journal of Oral and Maxillofacial Surgery, vol. 42, no. 8, pp. 497–505, 1984. View at Publisher · View at Google Scholar · View at Scopus
  38. G. M. Raghoebar, R. H. Batenburg, N. M. Timmenga, A. Vissink, and H. Reintsema, “Morbidity and complications of bone grafting of the floor of the maxillary sinus for the placement of endosseous implants,” Mund-, Kiefer- und Gesichtschirurgie, vol. 3, pp. S65–S69, 1999. View at Publisher · View at Google Scholar · View at Scopus
  39. B. T. Brettin, N. M. Grosland, F. Qian et al., “Bicortical vs monocortical orthodontic skeletal anchorage,” American Journal of Orthodontics and Dentofacial Orthopedics, vol. 134, no. 5, pp. 625–635, 2008. View at Publisher · View at Google Scholar · View at Scopus
  40. C. L. Fernandes, “Volumetric analysis of maxillary sinuses of Zulu and European crania by helical, multislice computed tomography,” Journal of Laryngology and Otology, vol. 118, no. 11, pp. 877–881, 2004. View at Publisher · View at Google Scholar · View at Scopus