Table of Contents
Journal of Petroleum Engineering
Volume 2013 (2013), Article ID 864981, 16 pages
http://dx.doi.org/10.1155/2013/864981
Review Article

Review of Sand Production Prediction Models

1Department of Civil and Environmental Engineering, University of Alberta, Edmonton, AB, Canada T6G 2W2
2BP America Inc., Houston, TX 77079, USA

Received 31 August 2012; Revised 7 November 2012; Accepted 12 November 2012

Academic Editor: Jorge Ancheyta

Copyright © 2013 Hossein Rahmati et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. M. Willson, Z. A. Moschovidis, J. R. Cameron, and I. D. Palmer, “New model for predicting the rate of sand production,” in SPE/ISRM Rock Mechanics Conference, pp. 152–160, Irving, Tex, USA, October 2002. View at Scopus
  2. Y. Xiao and H. H. Vaziri, “Import of strength degradation process in sand production prediction and management,” in Proceedings of the 45th U.S. Rock Mechanics/Geomechanics Symposium, San Francisco, Calif, USA, June 2011.
  3. E. Papamichos, P. Cerasi, J. F. Stenebråten et al., “Sand production rate under multiphase flow and water breakthrough,” in Proceedings of the 44th U.S. Rock Mechanics Symposium and the 5th US/Canada Rock Mechanics Symposium, Salt Lake City, Utah, USA, June 2010. View at Scopus
  4. L. Jing and O. Stephansson, Fundamentals of Discrete Element Methods For Rock Engineering, Theory and Applications, Elsevier, 2007.
  5. N. Belheine, J. P. Plassiard, F. V. Donzé, F. Darve, and A. Seridi, “Numerical simulation of drained triaxial test using 3D discrete element modeling,” Computers and Geotechnics, vol. 36, no. 1-2, pp. 320–331, 2009. View at Publisher · View at Google Scholar · View at Scopus
  6. P. H. S. W. Kulatilake, B. Malama, and J. Wang, “Physical and particle flow modeling of jointed rock block behavior under uniaxial loading,” International Journal of Rock Mechanics and Mining Sciences, vol. 38, no. 5, pp. 641–657, 2001. View at Publisher · View at Google Scholar · View at Scopus
  7. I. Vardoulakis, M. Stavropoulou, and P. Papanastasiou, “Hydro-mechanical aspects of the sand production problem,” Transport in Porous Media, vol. 22, no. 2, pp. 225–244, 1996. View at Google Scholar · View at Scopus
  8. E. Papamichos and M. Stavropoulou, “An erosion-mechanical model for sand production rate prediction,” International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts, vol. 35, no. 4, pp. 531–532, 1998. View at Google Scholar
  9. E. Papamichos, I. Vardoulakis, J. Tronvoll, and A. Skjrstein, “Volumetric sand production model and experiment,” International Journal for Numerical and Analytical Methods in Geomechanics, vol. 25, no. 8, pp. 789–808, 2001. View at Publisher · View at Google Scholar · View at Scopus
  10. H. Vaziri, B. Barree, Y. Xiao, I. Palmer, and M. Kutas, “What is the magic of water in producing sand?” in SPE Annual Technical Conference and Exhibition, pp. 2973–2985, San Antonio, Tex, USA, October 2002. View at Scopus
  11. C. Detournay, C. Tan, and B. Wu, “Modeling the mechanism and rate of sand production using FLAC,” in Proceedings of the of 4th International FLAC Symposium on Numerical Modeling in Geomechanics, pp. 8–10.
  12. A. Nouri, H. Vaziri, H. Belhaj, and R. Islam, “Sand-production prediction: a new set of criteria for modeling based on large-scale transient experiments and numerical investigation,” SPE Journal, vol. 11, no. 2, pp. 227–237, 2006. View at Google Scholar · View at Scopus
  13. A. Nouri, E. Kuru, and H. Vaziri, “Enhanced modelling of sand production through improved deformation and stress analysis,” in Proceedings of the Canadian International Petroleum Conference, pp. 12–14, Calgary, Canada, June 2007.
  14. H. Vaziri, A. Nouri, K. Hovem, and X. Wang, “Computation of sand production in water injectors,” SPE Production and Operations, vol. 23, no. 4, pp. 518–524, 2008. View at Google Scholar · View at Scopus
  15. C. Detournay, “Numerical modeling of the slit mode of cavity evolution associated with sand production,” in Proceedings of the SPE Annual Technical Conference and Exhibition (ATCE '08), pp. 3422–3431, Denver, Colo, USA, September 2008. View at Scopus
  16. A. Nouri, E. Kuru, and H. Vaziri, “Elastoplastic modelling of sand production using fracture energy regularization method,” Journal of Canadian Petroleum Technology, vol. 48, no. 4, pp. 64–71, 2009. View at Google Scholar · View at Scopus
  17. A. S. Kim, M. M. Sharma, and H. Fitzpatrick, “A Predictive model for sand production in poorly consolidated sands,” in Proceedings of the International Petroleum Technology Conference, pp. 15–17, Bangkok, Thailand, November 2011.
  18. P. C. Papanastasiou and I. G. Vardoulakis, “Numerical treatment of progressive localization in relation to borehole stability,” International Journal for Numerical & Analytical Methods in Geomechanics, vol. 16, no. 6, pp. 389–424, 1992. View at Google Scholar · View at Scopus
  19. H. B. Muehlhaus and I. Vardoulakis, “The thickness of shear bands in granular materials,” Geotechnique, vol. 37, no. 3, pp. 271–283, 1987. View at Google Scholar · View at Scopus
  20. A. Zervos, P. Papanastasiou, and I. Vardoulakis, “Modelling of localisation and scale effect in thick-walled cylinders with gradient elastoplasticity,” International Journal of Solids and Structures, vol. 38, no. 30-31, pp. 5081–5095, 2001. View at Publisher · View at Google Scholar · View at Scopus
  21. A. Zervos, P. Papanastasiou, and I. Vardoulakis, “A finite element displacement formulation for gradient elastoplasticity,” International Journal for Numerical Methods in Engineering, vol. 50, no. 6, pp. 1369–1388, 2001. View at Google Scholar
  22. T. Crook, S. Willson, J. G. Yu, and R. Owen, “Computational modelling of the localized deformation associated with borehole breakout in quasi-brittle materials,” Journal of Petroleum Science and Engineering, vol. 38, no. 3-4, pp. 177–186, 2003. View at Publisher · View at Google Scholar · View at Scopus
  23. J. Wang, D. P. Yale, and G. R. Dasari, “Numerical modeling of massive sand production,” in Proceedings of the SPE Annual Technical Conference and Exhibition, Denver, Colo, USA, October 2011.
  24. H. Rahmati, A. Nouri, D. Chan, and H. Vaziri, “Validation of predicted cumulative sand and sand rate against physical-model test,” Journal of Canadian Petroleum Technology, vol. 51, no. 5, pp. 403–410, 2011. View at Google Scholar
  25. N. Morita, D. L. Whitfill, I. Massie, and T. W. Knudsen, “Realistic sand-production prediction: numerical approach,” SPE Production Engineering, vol. 4, no. 1, pp. 15–24, 1989. View at Google Scholar · View at Scopus
  26. N. Morita, E. Davis, and L. Whitebay, “Guidelines for solving sand problems in water injection wells,” in Proceedings of the SPE International Symposium on Formation Damage Control, pp. 189–200, Lafayette, La, USA, February 1998. View at Scopus
  27. R. C. Burton, E. R. Davis, N. Morita, and H. O. McLeod, “Application of reservoir strength characterization and formation failure modeling to analyze sand production potential and formulate sand control strategies for a series of North Sea gas reservoirs,” in Proceedings of the SPE Technical Conference and Exhibition, pp. 159–168, New Orleans, La, USA, September 1998. View at Scopus
  28. A. Skjaerstein, M. Stavropoulou, I. Vardoulakis, and J. Tronvoll, “Hydrodynamic erosion: a potential mechanism of sand production in weak sandstones,” International Journal of Rock Mechanics and Mining Sciences, vol. 34, no. 3-4, pp. 292.e1–292.e18, 1997. View at Publisher · View at Google Scholar · View at Scopus
  29. E. Papamichos and E. M. Malmanger, “A sand erosion model for volumetric sand predictions in a north sea reservoir,” in Proceedings of the SPE Latin American and Caribbean Petroleum Engineering Conference, Caracas, Venzuela, 1999.
  30. X. Yi, “Water injectivity decline caused by sand mobilization: simulation and prediction,” in Proceedings of the SPE Permian Basin Oil and Gas Recovery Conference, pp. 202–209, Midland, Tex, USA, May 2001. View at Scopus
  31. H. H. Vaziri, Y. Xiao, R. Islam, and A. Nouri, “Numerical modeling of seepage-induced sand production in oil and gas reservoirs,” Journal of Petroleum Science and Engineering, vol. 36, no. 1-2, pp. 71–86, 2002. View at Publisher · View at Google Scholar · View at Scopus
  32. Y. Wang and S. Xue, “Coupled reservoir-geomechanics model with sand erosion for sand rate and enhanced production prediction,” in Proceedings of the SPE International ymposium on Formation Damage Control, pp. 373–383, Lafayette, La, USA, February 2002. View at Scopus
  33. L. Y. Chin and G. G. Ramos, “Predicting volumetric sand production in weak reservoirs,” in Proceedings of the SPE/ISRM Rock Mechanics Conference, pp. 161–170, Irving, Tex, USA, October 2002. View at Scopus
  34. A. Nouri, M. M. Al-Darbi, H. Vaziri, and M. R. Islam, “Deflection criteria for numerical assessment of the sand production potential in an openhole completion,” Energy Sources, vol. 24, no. 7, pp. 685–702, 2002. View at Publisher · View at Google Scholar · View at Scopus
  35. J. Wang, R. G. Wan, A. Settari, and D. Walters, “Prediction of volumetric sand production and wellbore stability analysis of a well at different completion schemes,” in Proceedings of the 40th U.S. Symposium on Rock Mechanics (USRMS '05), Anchorage, Alaska, USA, June 2005.
  36. G. Servant, P. Marchina, Y. Peysson, E. Berner, and J. F. Nauroy, “Sand erosion in weakly consolidated reservoirs: experiments and numerical modeling,” in Proceedings of the 15th SPE-DOE Improved Oil Recovery Symposium: Old Reservoirs New Tricks a Global Perspective, pp. 949–956, Tulsa, Okla, USA, April 2006. View at Scopus
  37. A. Nouri, H. Vaziri, and E. Kuru, “Numerical investigation of sand production under realistic reservoir/well flow conditions,” in Proceedings of the Canadian International Petroleum Conference, pp. 13–15, Calgary, Canada, June 2006.
  38. A. Nouri, H. Vaziri, H. Belhaj, and M. R. Islam, “Comprehensive transient modeling of sand production in horizontal wellbores,” SPE Journal, vol. 12, no. 4, pp. 468–474, 2007. View at Google Scholar · View at Scopus
  39. S. Azadbakht, M. Jafarpour, H. Rahmati, A. Nouri, H. Vaziri, and D. Chan, “A numerical model for predicting the rate of sand production in injector wells,” in Proceedings of the SPE Deep Water and Completions Conference and Exhibition, pp. 20–21, Galveston, Tex, USA, June 2012.
  40. J. Sulem, I. Vardoulakis, E. Papamichos, A. Oulahna, and J. Tronvoll, “Elasto-plastic modelling of Red Wildmoor sandstone,” Journal of Mechanics of Cohesive-Frictional MaterialsNo, vol. 4, no. 3, pp. 215–245, 1999. View at Google Scholar
  41. M. Jafarpour, H. Rahmati, S. Azadbakht, A. Nouri, D. Chan, and H. Vaziri, “Determination of mobilized strength properties of degrading sandstone,” Journal of Soils and Foundations, vol. 52, no. 4, pp. 658–667, 2012. View at Google Scholar
  42. R. P. Nordgren, “Strength of well completions,” in Proceedings of the 18th US Symposium on Rock Mechanics (USRMS '77), Golden, Colo, USA, June 1977.
  43. G. R. Coates and S. A. Denoo, “Mechanical properties program using borehole analysis and mohr’s circle,” in Proceedings of the 22nd Annual Logging Symposium (SPWLA '81), pp. 23–26, 1981.
  44. R. Risnes, R. K. Bratili, and P. Horsrud, “Sand stresses around a wellbore,” SPE Journal, vol. 22, no. 6, pp. 883–898, 1982. View at Google Scholar · View at Scopus
  45. D. P. Edwards, Y. Sharma, and A. Charron, “Zones of sand production identified by log-derived mechanical properties: a case study,” in Proceedings of the 8th European Formation Evaluation Symposium (SPWLA '83), London, UK, 1983.
  46. D. Antheunis, P. B. Vriezen, B. A. Schipper, and A. C. van der Vlis, “Perforation collapse: failure of perforated friable sandstones,” in Proceedings of the SPE European Spring Meeting, pp. 8–9, Amsterdam, The Netherlands, April 1976.
  47. J. M. Peden, U. Heriot Watt, and A. A. M. Yassin, “The determination of optimum completion and production conditions for sand-free oil production,” in Proceedings of the SPE Annual Technical Conference and Exhibition, New Orleans, La, USA, October 1986.
  48. R. G. Wan and J. Wang, “Analysis of sand production in unconsolidated oil sand using a coupled erosional-stress-deformation model,” Journal of Canadian Petroleum Technology, vol. 43, no. 2, pp. 47–53, 2004. View at Google Scholar
  49. J. Wang, D. Walters, A. Settari, and R. G. Wan, “An integrated modular approach to modeling sand production and cavity growth with emphasis on the multiphase flow and 3D effects,” in Proceedings of the 41st U.S. Symposium on Rock Mechanics Symposium, Golden, Colo, USA, June 2006.
  50. R. G. Wan and J. Wang, “Modeling of sand production and wormhole propagation in oil saturated sand pack using stabilized finite element methods,” Journal of Canadian Petroleum Technology, vol. 42, no. 12, pp. 1–8, 2003. View at Google Scholar
  51. A. Nouri, H. Vaziri, H. Belhaj, and R. Islam, “Effect of volumetric failure on sand production in Oil-wellbores,” in Proceedings of the SPE Asia Pacific Oil and Gas Conference and Exhibition, pp. 86–93, Jakarta, Indonesia, April 2003. View at Scopus
  52. P. Papanastasiou and A. Zervos, “Wellbore stability analysis: from linear elasticity to postbifurcation modeling,” International Journal of Geomechanics, vol. 4, no. 1, pp. 2–12, 2004. View at Publisher · View at Google Scholar · View at Scopus
  53. E. Papamichos, J. Tronvoll, A. Skjærstein, and T. E. Unander, “Hole stability of Red Wildmoor sandstone under anisotropic stresses and sand production criterion,” Journal of Petroleum Science and Engineering, vol. 72, no. 1-2, pp. 78–92, 2010. View at Publisher · View at Google Scholar · View at Scopus
  54. I. Vardoulakis, J. Sulem, and A. Guenot, “Borehole instabilities as bifurcation phenomena,” International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts, vol. 25, no. 3, pp. 159–170, 1988. View at Google Scholar · View at Scopus
  55. J. Tronvoll, E. Papamichos, and N. Kessler, “Perforation cavity stability: investigation of failure mechanisms,” in Proceedings of the International Symposium on Geotechnical Engineering of Hard Soils—Soft Rocks, pp. 1687–1693, Balkema, Rotterdam, The Netherlands, 1993.
  56. P. J. Van Den Hoek, G. M. M. Hertogh, A. P. Kooijman, P. De Bree, C. J. Kenter, and E. Papamichos, “New concept of sand production prediction: theory and laboratory experiments,” SPE Drilling and Completion, vol. 15, no. 4, pp. 261–273, 2000. View at Google Scholar · View at Scopus
  57. P. C. Papanastasiou and I. G. Vardoulakis, “Bifurcation analysis of deep boreholes: II. Scale effect,” International Journal for Numerical & Analytical Methods in Geomechanics, vol. 13, no. 2, pp. 183–198, 1989. View at Google Scholar · View at Scopus
  58. B. Haimson, “Micromechanisms of borehole instability leading to breakouts in rocks,” International Journal of Rock Mechanics and Mining Sciences, vol. 44, no. 2, pp. 157–173, 2007. View at Publisher · View at Google Scholar · View at Scopus
  59. R. Risnes and R. K. Bratli, “Stability and failure of sand arches,” in Proceedings of the 54th Annual Technical Conference and Exhibition of the Society of Petroleum Engineers of AIME, Las Vegas, Nev, USA, September 1979.
  60. R. K. Bratli and R. Risnes, “Stability and failure of sand arches,” SPE Journal, vol. 21, no. 2, pp. 236–248, 1981. View at Google Scholar · View at Scopus
  61. J. S. Weingarten and T. K. Perkins, “Prediction of sand production in gas wells: methods and gulf of Mexico case studies,” Journal of Petroleum Technology, vol. 47, no. 7, pp. 596–600, 1995. View at Google Scholar · View at Scopus
  62. J. Tronvoll, A. Skjaerstein, and E. Papamichos, “Sand production: mechanical failure or hydrodynamic erosion,” International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts, vol. 34, no. 3-4, pp. 291.e1–291.e17, 1997. View at Publisher · View at Google Scholar · View at Scopus
  63. I. Vardoulakis, P. Papanastasiou, and M. Stavropoulou, “Sand erosion in axial flow conditions,” Transport in Porous Media, vol. 45, no. 2, pp. 267–281, 2001. View at Publisher · View at Google Scholar · View at Scopus
  64. M. Stavropoulou, P. Papanastasiou, and I. Vardoulakiz, “Coupled wellbore erosion and stability analysis,” International Jounral for Numerical and Analytical Methods in Geomechanics, vol. 22, no. 9, pp. 749–769, 1998. View at Google Scholar
  65. E. Papamichos and I. Vardoulakis, “Sand erosion with a porosity diffusion law,” Computers and Geotechnics, vol. 32, no. 1, pp. 47–58, 2005. View at Publisher · View at Google Scholar · View at Scopus
  66. B. Haimson and H. Lee, “Borehole breakouts and compaction bands in two high-porosity sandstones,” International Journal of Rock Mechanics and Mining Sciences, vol. 41, no. 2, pp. 287–301, 2004. View at Publisher · View at Google Scholar · View at Scopus
  67. E. Papamichos, “Sand production physical and experimental evidence,” Journal of Geomechanics in Energy Production, vol. 10, no. 6-7, pp. 803–816, 2006. View at Google Scholar
  68. J. Tronvoll and E. Fjær, “Experimental study of sand production from perforation cavities,” International Journal of Rock Mechanics and Mining Sciences and Geomechanics, vol. 31, no. 5, pp. 393–410, 1994. View at Google Scholar · View at Scopus
  69. J. Tronvoll, M. B. Dusseault, F. Sanfilippo, and F. J. Santarelli, “The tools of sand management,” in Proceedings of the SPE Annual Technical Conference and Exhibition, pp. 3101–3115, New Orleans, La, USA, October 2001. View at Scopus
  70. M. F. Trentacoste, Evaluation of LS-DYNA soil material model 147, no. FHWA-HRT-04-094, 2004.
  71. P. Papanastasiou and A. Zervos, “Three-dimensional stress analysis of a wellbore with perforations and a fracture,” in Proceedings of the SPR/ISRM Rock Mechanics In Petroleum Engineering (Eurock '98), pp. 347–355, Trondheim, Norway, July 1998. View at Scopus
  72. F. J. Santarelli, E. Skomedal, P. Markestad, H. I. Berge, and H. Nasvig, “Sand production on water injectors: just how bad can it get?” in Proceedings of the SPR/ISRM Rock Mechanics In Petroleum Engineering (Eurock '98), pp. 107–115, Trondheim, Norway, July 1998. View at Scopus
  73. F. J. Santarelli, E. Skomedal, P. Markestad, H. I. Berge, and H. Nasvig, “Sand production on water injectors: how bad can it get?” SPE Drilling and Completion, vol. 15, no. 2, pp. 132–139, 2000. View at Google Scholar · View at Scopus
  74. F. J. Santarelli, F. Sanfilippo, J. Embry, M. White, and J. B. Turnbull, “The Sanding mechanisms of water injectors and their quantification in terms of sand production: example of the Buzzard Field (UKCS),” in Proceedings of the SPE Annual Technical Conference and Exhibition, Denver, Colo, USA, October 2011.
  75. A. Hayatdavoudi, “Formation sand liquefaction: a mechanism for explaining fines migration and well sanding,” in Proceedings of the SPE Mid-Continent Operations Symposium, Oklahoma City, Okla, USA, March 1999.
  76. P. K. Robertson and C. E. Fear, “Liquefaction of sands and its evaluation,” in Proceedings of the 1st International Conference on Earthquake Geotechnical Engineering, 1997.
  77. R. M. O'Connor, J. R. Torczynski, D. S. Preece, J. T. Klosek, and J. R. Williams, “Discrete element modeling of sand production,” International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts, vol. 34, no. 3-4, pp. 231.e1–231.e15, 1997. View at Publisher · View at Google Scholar · View at Scopus
  78. R. P. Jensen and D. S. Preece, Modeling of Sand Production with Darcy’s Flow Coupled with Discrete Elements, OSTI, 2000.
  79. L. Li, E. Papamichos, and P. Cerasi, “Investigation of sand production mechanisms using DEM with fluid flow,” in Proceedings of the International Symposium of the International Society for Rock Mechanics (Eurock '06), pp. 241–247, Liège, Belgium, May 2006. View at Scopus
  80. L. Li and R. M. Holt, “Particle scale reservoir mechanics,” Oil and Gas Science and Technology, vol. 57, no. 5, pp. 525–538, 2002. View at Google Scholar · View at Scopus
  81. L. Y. G. Cheung, Micromechanics of Sand Production in Oil Wells [Ph.D. thesis], Imperial College of London, 2010.
  82. Z. Y. Zhou, A. B. Yu, and S. K. Choi, “Numerical simulation of the liquid-induced erosion in a weakly bonded sand assembly,” Powder Technology, vol. 211, no. 2-3, pp. 237–249, 2011. View at Publisher · View at Google Scholar · View at Scopus
  83. P. A. Cundall, “A computer model for simulating progressive large scale movement in blocky rock systems,” in Proceedings of the Symposium International Society of Rock Mechanics, 1971.
  84. D. O. Potyondy and P. A. Cundall, “A bonded-particle model for rock,” International Journal of Rock Mechanics and Mining Sciences, vol. 41, no. 8, pp. 1329–1364, 2004. View at Publisher · View at Google Scholar · View at Scopus
  85. S. Thallak, L. Rothenburg, and M. Dusseault, “Hydraulic fracture (parting) simulation in granular assemblies using the discrete element method,” AOSTRA Journal of Research, vol. 6, pp. 141–153, 1990. View at Google Scholar
  86. D. Chan and S. Tipthavonnukul, “Numerical simulation of granular particles movement in fluid flow,” International Journal of Nonlinear Sciences and Numerical Simulation, vol. 9, no. 3, pp. 229–248, 2008. View at Google Scholar · View at Scopus
  87. J. Yoon, “Application of experimental design and optimization to PFC model calibration in uniaxial compression simulation,” International Journal of Rock Mechanics and Mining Sciences, vol. 44, no. 6, pp. 871–889, 2007. View at Publisher · View at Google Scholar · View at Scopus
  88. U. El Shamy and A. Elmekati, “An efficient combined DEM/FEM technique for soil-structure interaction problems,” in International Foundation Congress and Equipment Expo, pp. 238–245, Orlando, Fla, USA, March 2009. View at Publisher · View at Google Scholar · View at Scopus
  89. A. Elmekati and U. E. Shamy, “A practical co-simulation approach for multiscale analysis of geotechnical systems,” Computers and Geotechnics, vol. 37, no. 4, pp. 494–503, 2010. View at Publisher · View at Google Scholar · View at Scopus
  90. N. M. Azevedo and J. V. Lemos, “Hybrid discrete element/finite element method for fracture analysis,” Computer Methods in Applied Mechanics and Engineering, vol. 195, no. 33–36, pp. 4579–4593, 2006. View at Publisher · View at Google Scholar · View at Scopus
  91. M. Zeghal and U. El Shamy, “A continuum-discrete hydromechanical analysis of granular deposit liquefaction,” International Journal for Numerical and Analytical Methods in Geomechanics, vol. 28, no. 14, pp. 1361–1383, 2004. View at Publisher · View at Google Scholar · View at Scopus