Research Article
Thermolysis of High-Density Polyethylene to Petroleum Products
| | GC-MS-OP 2010 Shimadzu | |
| GC conditions |
| Column oven temperature | 70°C | | Injection mode | Split | | Injection temperature | 200°C | | Split ratio | 10 | | Flow control mode | Linear velocity | | Column flow | 1.51 mL/min | | Carrier gas | Helium 99.9995% purity | |
| Column oven temperature progress | Rate | Temperature (°C) | Hold time (min) |
| — | 70 | 2 | 10 | 300 | 7.0 (32 min total) |
| Column: DB-5 |
| Length | 30.0 m | | Diameter | 0.25 mm | | Film thickness | 0.25 µm | |
| MS conditions |
| Ion source temperature | 200°C | | Interface temperature | 240°C | | Start | 40 | | End | 1000 | |
|
|