Table of Contents
Journal of Petroleum Engineering
Volume 2014, Article ID 126167, 8 pages
http://dx.doi.org/10.1155/2014/126167
Research Article

The Mechanism of Wellbore Weakening in Worn Casing-Cement-Formation System

1Texas A&M University, College Station, TX 77843, USA
2University of North Dakota, Grand Forks, ND 58202, USA

Received 25 February 2014; Accepted 3 June 2014; Published 24 June 2014

Academic Editor: Guillaume Galliero

Copyright © 2014 Zheng Shen et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. S. Song, J. Bowen, and F. Klementich, “Internal pressure capacity of crescent-shaped wear casing,” in Proceedings of the IADC/SPE Drilling Conference, pp. 547–553, New Orleans, La, USA, February 1992. View at Scopus
  2. P. Oudeman and M. Kerem, “Transient behavior of annular pressure build-up in HP/HT wells,” in Proceedings of the 11th ADIPEC: Abu Dhabi International Petroleum Exhibition and Conference, pp. 665–674, Abu Dhabi, UAE, October 2004. View at Scopus
  3. J. Wu and M. G. Zhang, “Casing burst strength after casing wear,” in Proceedings of the SPE Production and Operations Symposium 2005, pp. 517–526, Oklahoma City, Okla, USA, April 2005. View at Scopus
  4. R. W. Hall Jr. and K. P. Malloy Sr., “Contact pressure threshold: an important new aspect of casing wear,” in SPE Production and Operations Symposium 2005: Anticipate the Future, Build on the Present, Celebrate the Past, pp. 499–505, Society of Petroleum Engineers, Oklahoma City, Okla, USA, April 2005. View at Scopus
  5. D. Gao, L. Sun, and J. Lian, “Prediction of casing wear in extended-reach drilling,” Petroleum Science, vol. 7, no. 4, pp. 494–501, 2010. View at Publisher · View at Google Scholar · View at Scopus
  6. W. W. Fleckenstein, A. W. Eustes III, and M. G. Miller, “Burst-induced stresses in cemented wellbores,” SPE Drilling and Completion, vol. 16, no. 2, pp. 74–82, 2001. View at Google Scholar · View at Scopus
  7. W. J. Rodriguez, W. W. Fleckenstein, and A. W. Eustes, “Simulation of collapse loads on cemented casing using finite element analysis,” in Proceedings of the SPE Annual Technical Conference and Exhibition, pp. 5239–5247, Denver, Colo, USA, October 2003. View at Scopus
  8. S. Talabani, B. Atlas, M. B. Al-Khatiri, and M. R. Islam, “An alternate approach to downhole corrosion mitigation,” Journal of Petroleum Science and Engineering, vol. 26, no. 1-4, pp. 41–48, 2000. View at Publisher · View at Google Scholar · View at Scopus
  9. W. B. Bradley and J. E. Fontenot, “The prediction and control of casing wear (includes associated papers 6398 and 6399),” SPE Journal of Petroleum Technology, vol. 27, no. 2, pp. 233–245, 1975. View at Publisher · View at Google Scholar
  10. W. M. Rainforth, “Microstructural evolution at the worn surface: a comparison of metals and ceramics,” Wear, vol. 245, no. 1-2, pp. 162–177, 2000. View at Publisher · View at Google Scholar · View at Scopus
  11. B. Calhoun, S. Langdon, J. Wu, P. Hogan, and K. Rutledge, “Casing wear prediction and management in deepwater wells,” in Proceedings of the SPE Deepwater Drilling and Completions Conference 2010, pp. 232–241, Society of Petroleum Engineers, Galveston, Tex, USA, October 2010. View at Scopus
  12. E. Fjar, R. M. Holt, A. M. Raaen, R. Risnes, and P. Horsrud, Petroleum Related Rock Mechanics, Elsevier, Oxford, UK, 2004.
  13. Z. Shen and F. E. Beck, “Three-dimensional modeling of casing and cement sheath behavior in layered, nonhomogeneous formations,” in Proceedings of the IADC/SPE Asia Pacific Drilling Technology Conference 2012, pp. 949–958, Society of Petroleum Engineers, July 2012. View at Scopus
  14. T. Tamano, “A new empirical formula for collapse resistance of commercial casing,” in ASME Transactions of Energy Resources Technology, 2005. View at Google Scholar