Table of Contents
Journal of Petroleum Engineering
Volume 2015 (2015), Article ID 281276, 12 pages
http://dx.doi.org/10.1155/2015/281276
Research Article

An Integrated Approach for Drilling Optimization Using Advanced Drilling Optimizer

Petroleum Engineering Department, University of Louisiana at Lafayette, Lafayette, LA 70504, USA

Received 13 September 2014; Accepted 5 December 2014

Academic Editor: Merv Fingas

Copyright © 2015 David Hankins et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. G. Hareland, H. R. Motahhari, J. P. Hayes, and A. Qureshi, “Increased drilling-efficiency of gas-storage wells proven using drilling simulator,” in Proceedings of the CIPC/SPE Gas Technology Symposium, Paper SPE 114798, Calgary, Canada, June 2008.
  2. T. Berre, L. Tunbridge, and K. Hoeg, “The measurement of small strains and K0-values in triaxial tests on clay-shales,” in Proceedings of the 8th International Congress on Rock Mechanics, pp. 1195–1199, Tokyo, Japan, 1995. View at Scopus
  3. F. Zausa, L. Civolani, M. Brignoli, and F. J. Santarelli, “Real-time wellbore stability analysis at the rig-site,” in Proceedings of the SPE/IADC Drilling Conference, Paper SPE 37670, Amsterdam, The Netherlands, March 1997.
  4. K. Tokle, P. Horsrud, and R. K. Bratli, “Predicting uniaxial compressive strength from log parameters,” in Proceedings of the 61st Annual Technical Conference and Exhibition of the Society of Petroleum Engineers, Paper SPE 15645, New Orleans, Lo, USA, October 1986.
  5. P. R. Rampersad, G. Hareland, and P. Boonyapaluk, “Drilling optimization using drilling data and available technology,” in Proceedings of the 3rd Latin American/Caribbean Petroleum Engineering Conference, Paper SPE 27034, Buenos Aires, Argentina, April 1994.
  6. W. C. Maurer, “The perfect-cleaning theory of rotating drilling,” in Proceedings of the 37th Annual Fall Meeting of SPE, Paper SPE 408, Los Angeles, Calif, USA, October 1962.
  7. G. Hareland, R. Nygaard, B. K. Virginillo, and H. B. Munro, “Drilling simulation improves field communication and reduces drilling cost in Western Canada,” in Proceedings of the Petroleum Society’s 8th Canadian International Petroleum Conference, Paper PETSOC 2007-086, Calgary, Alberta, Canada, June 2007. View at Publisher · View at Google Scholar
  8. G. Hareland, W. Yan, R. Nygaard, and J. L. Wise, “Cutting efficiency of a single PDC cutter on hard rock,” in Proceedings of the Petroleum Society’s 8th Canadian International Petroleum Conference, Paper 2007-082, Calgary, Alberta, Canada, June 2007.
  9. R. Andrews, G. Hareland, R. Nygaard, T. Engler, H. Munro, and B. Virginillo, “Methods of logs to quantify drillability,” in Proceedings of the SPE Rocky Mountain Oil and Gas Technology Symposium, Paper SPE 106571, Denver, Colo, USA, April 2007.
  10. A. T. Bourgoyne, K. K. Millheim, M. E. Chenevert, and F. S. Young, Applied Drilling Engineering, vol. 2 of SPE Textbook Series, 1986.
  11. R. Nygaard and G. Hareland, “Application of rock strength in drilling evaluation,” in Proceedings of the SPE 10th Latin American and Caribbean Petroleum Engineering Conference, (LACPEC '07), pp. 86–92, Buenos Aires, Argentina, April 2007. View at Scopus
  12. R. K. Bratli, G. Hareland, F. Stene, G. W. Dunsaed, and G. Gjelstad, “Drilling optimization software verified in the North Sea,” in Proceedings of the SPE LACPEC Conference, Paper SPE 39007, Rio de Janeiro, Brazil, September 1997.
  13. E. C. Onyia, “Relationships between formation strength, drilling strength, and electric log properties,” in Proceedings of the 63rd Annual Technical Conference and Exhibition of the Society of Petroleum Engineers, Paper SPE 18166, Houston, Tex, USA, October 1988. View at Scopus
  14. M. Fazaelizadeh, B. Rashidi, and G. Hareland, “Drilling-derived rock strength can simulate upcoming well performance,” in Proceedings of the Canadian Unconventional Resources and International Petroleum Conference, SPE-135857-MS, Society of Petroleum Engineers, Calgary, Canada, October 2010. View at Publisher · View at Google Scholar
  15. L. Song and G. Hareland, “Minimum horizontal stress profile from rock strength for montney formation in North East British Columbia Canada,” in Proceedings of the 47th US Rock Mechanics/Geomechanics Symposium, Paper ARMA 13-141, San Francisco, Calif, USA, June 2013.
  16. M. Rastegar, G. Hareland, R. Nygaard, and A. Bashari, “Optimization of multiple bit runs based on ROP models and cost equation: a new methodology applied for one of the Persian gulf carbonate fields,” in Proceedings of the IADC/SPE Asia Pacific Drilling Technology Conference and Exhibition, Paper IADC/SPE 114665, Jakarta, Indonesia, August 2008.
  17. G. Gjelstad, G. Hareland, K. N. Nikolaisen, and R. K. Bratli, “The method of reducing drilling costs more than 50 percent,” in Proceedings of the SPE/ISRM Eurock, Paper SPE/ISRM 47342, Trondheim, Norway, July 1998.