Table of Contents
Journal of Petroleum Engineering
Volume 2015, Article ID 828451, 10 pages
http://dx.doi.org/10.1155/2015/828451
Research Article

A Comparative Study of Diesel Oil and Soybean Oil as Oil-Based Drilling Mud

Department of Chemical & Petroleum Engineering, Faculty of Engineering, University of Uyo, PMB 1017, Uyo, Akwa Ibom State 52001, Nigeria

Received 20 July 2014; Accepted 21 January 2015

Academic Editor: Guillaume Galliero

Copyright © 2015 Okorie E. Agwu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Shell Petroleum Development Company, Shell Intensive Training Manual, Shell Petroleum Development Company, 2000.
  2. J. E. Friedheim, “Area-specific analysis reflects impact of new generation fluid systems on deepwater exploration,” in Proceedings of the IADC/SPE Asia Pacific Drilling Technology Conference, IADC/SPE 47842, Society of Petroleum Engineers, Jakarta, Indonesia, September 1998. View at Publisher · View at Google Scholar
  3. B. Hughes, Drilling Fluids Reference Manual, 2006.
  4. A. T. Bourgoyne, M. E. Chenevert, K. K. Millheim, and F. S. Young, Applied Drilling Engineering, vol. 2 of SPE Textbook Series, SPE, Richardson, Tex, USA, 2003.
  5. M. M. Dardira, S. Ibrahimea, M. Solimanb, S. D. Desoukya, and A. A. Hafiza, “Preparation and evaluation of some esteramides as synthetic based drilling fluids,” Egypt Journal of Petroleum, vol. 23, no. 1, pp. 35–43, 2014. View at Google Scholar
  6. J. E. Friedheim and H. L. Conn, “Second generation synthetic fluids in the north sea: are they better?” in Proceedings of the SPE/IADC Drilling Conference, IADC/SPE 35061, pp. 215–228, Society of Petroleum Engineers, New Orleans, La, USA, March 1996.
  7. R. G. Fechhelm, B. J. Gallaway, and J. M. Farmer, “Deepwater sampling at a synthetic drilling mud discharge site on the outer continental shelf, Northern Gulf of Mexico,” in Proceedings of the SPE/EPA Exploration and Production Environmental Conference, SPE 52744, pp. 509–513, Society of Petroleum Engineers, Austin, Tex, USA, February-March 1999. View at Publisher · View at Google Scholar
  8. F. Adesina, A. Anthony, A. Gbadegesin, O. Eseoghene, and A. Oyakhire, “Environmental impact evaluation of a safe drilling mud,” in Proceedings of the SPE Middle East Health, Safety, Security and Environment Conference, SPE 152865, pp. 2–4, Abu Dhabi, United Arab Emirates, April 2012.
  9. F. Adesina, F. Olugbenga, A. Churchill, A. Abiodun, and A. Anthony, “Novel formulation of environmentally friendly oil based drilling mud,” in New Technologies in the Oil and Gas Industry, chapter 3, InTech, 2012. View at Publisher · View at Google Scholar
  10. A. M. Yassin, A. Kamis, and M. O. Abdullah, “Palm oil diesel as a base fluid in formulating oil based drilling fluid,” SPE Paper 23001, Society of Petroleum Engineers, 1991. View at Google Scholar
  11. A. L. A. Paul, V. E. Efeovbokhan, A. A. Ayoola, and O. A. Akpanobong, “Investigating alternatives to diesel in oil based drilling mud formulations used in the oil industry,” Journal of Environment and Earth Science, vol. 4, no. 14, pp. 70–77, 2014. View at Google Scholar
  12. S. Akintola, A. B. Oriji, and M. Momodu, “Analysis of filtration properties of locally sourced base oil for the formulation of oil based drilling fluids,” Scientia Africana, vol. 13, no. 1, pp. 171–177, 2014. View at Google Scholar
  13. E. O. Aluyor, K. O. Obahiagbon, and M. Ori-Jesu, “Biodegradation of vegetable oils: a review,” Scientific Research and Essays, vol. 4, no. 6, pp. 543–548, 2009. View at Google Scholar · View at Scopus
  14. S. Howell, Promising Industrial Applications for Soybean Oil in the US, American Soybean Association, National Biodiesel Board, 2007.
  15. S. Z. Erhan and J. M. Perez, Biobased Industrial Fluids and Lubricants, The American Oil Chemists’ Society, 2002.