Table of Contents
Journal of Polymers
Volume 2013, Article ID 720209, 13 pages
http://dx.doi.org/10.1155/2013/720209
Research Article

Analysis of Incomplete Filling Defect for Injection-Molded Air Cleaner Cover Using Moldflow Simulation

1Kumho Petrochemical R&D Center, Hwaam-Dong 57-1, Yuseong, Daejeon 305-348, Republic of Korea
2Youngchang Silicone Co., Ltd., 481-7 Gasan-Dong, Kumchun-Gu, Seoul 153-803, Republic of Korea

Received 22 March 2013; Revised 21 May 2013; Accepted 10 June 2013

Academic Editor: Pasquale Longo

Copyright © 2013 Hyeyoung Shin and Eun-Soo Park. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [3 citations]

The following is the list of published articles that have cited the current article.

  • Jinwon Lee, Bumjin Park, Jongpyo Kim, and Seung Bin Park, “Effect of PVP, lithium chloride, and glycerol additives on PVDF dual-layer hollow fiber membranes fabricated using simultaneous spinning of TIPS and NIPS,” Macromolecular Research, 2015. View at Publisher · View at Google Scholar
  • Jing Hu, Meixia Chen, Huaixiang Tian, and Weijun Deng, “ Preparation and pyrolysis characteristics of PNIPAM-grafted SiO 2 hollow spheres loading vitamin C ,” RSC Adv., vol. 5, no. 99, pp. 81134–81141, 2015. View at Publisher · View at Google Scholar
  • Naoki Toyama, Shinobu Ohki, Masataka Tansho, Tadashi Shimizu, Tetsuo Umegaki, and Yoshiyuki Kojima, “Influence of alcohol solvents on morphology of hollow silica–alumina composite spheres and their activity for hydrolytic dehydrogenation of ammonia borane,” Journal of Sol-Gel Science and Technology, 2016. View at Publisher · View at Google Scholar