Table of Contents
Journal of Polymers
Volume 2013 (2013), Article ID 720209, 13 pages
http://dx.doi.org/10.1155/2013/720209
Research Article

Analysis of Incomplete Filling Defect for Injection-Molded Air Cleaner Cover Using Moldflow Simulation

1Kumho Petrochemical R&D Center, Hwaam-Dong 57-1, Yuseong, Daejeon 305-348, Republic of Korea
2Youngchang Silicone Co., Ltd., 481-7 Gasan-Dong, Kumchun-Gu, Seoul 153-803, Republic of Korea

Received 22 March 2013; Revised 21 May 2013; Accepted 10 June 2013

Academic Editor: Pasquale Longo

Copyright © 2013 Hyeyoung Shin and Eun-Soo Park. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Hyeyoung Shin and Eun-Soo Park, “Analysis of Incomplete Filling Defect for Injection-Molded Air Cleaner Cover Using Moldflow Simulation,” Journal of Polymers, vol. 2013, Article ID 720209, 13 pages, 2013. doi:10.1155/2013/720209