Table of Contents
Journal of Polymers
Volume 2013 (2013), Article ID 720209, 13 pages
http://dx.doi.org/10.1155/2013/720209
Research Article

Analysis of Incomplete Filling Defect for Injection-Molded Air Cleaner Cover Using Moldflow Simulation

1Kumho Petrochemical R&D Center, Hwaam-Dong 57-1, Yuseong, Daejeon 305-348, Republic of Korea
2Youngchang Silicone Co., Ltd., 481-7 Gasan-Dong, Kumchun-Gu, Seoul 153-803, Republic of Korea

Received 22 March 2013; Revised 21 May 2013; Accepted 10 June 2013

Academic Editor: Pasquale Longo

Copyright © 2013 Hyeyoung Shin and Eun-Soo Park. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Z. B. Chen and L.-S. Turng, “A review of current developments in process and quality control for injection molding,” Advances in Polymer Technology, vol. 24, no. 3, pp. 165–182, 2005. View at Publisher · View at Google Scholar · View at Scopus
  2. Y. K. Shen, P. H. Yeh, and J. S. Wu, “Numerical simulation for thin wall injection molding of fiber-reinforced thermoplastics,” International Communications in Heat and Mass Transfer, vol. 28, no. 8, pp. 1034–1042, 2001. View at Google Scholar · View at Scopus
  3. N. M. Neves, A. J. Pontes, and A. S. Pouzada, “Experimental validation of morphology simulation in glass fibre reinforced polycarbonate discs,” Journal of Reinforced Plastics and Composites, vol. 20, no. 6, pp. 452–465, 2001. View at Publisher · View at Google Scholar · View at Scopus
  4. I. S. Dairanieh, A. Haufe, H. J. Wolf, and G. Mennig, “Computer simulation of weld lines in injection molded poly(methyl methacrylate),” Polymer Engineering and Science, vol. 36, no. 15, pp. 2050–2057, 1996. View at Google Scholar · View at Scopus
  5. M.-C. Huang and C.-C. Tai, “Effective factors in the warpage problem of an injection-molded part with a thin shell feature,” Journal of Materials Processing Technology, vol. 110, no. 1, pp. 1–9, 2001. View at Publisher · View at Google Scholar · View at Scopus
  6. H. Shin and E.-S. Park, “Analysis of crack phenomenon for injection-molded screw using moldflow simulation,” Journal of Applied Polymer Science, vol. 113, no. 4, pp. 2702–2708, 2009. View at Publisher · View at Google Scholar · View at Scopus
  7. F. Pisciotti, A. Boldizar, M. Rigdahl, and I. Ariño, “Effects of injection-molding conditions on the gloss and color of pigmented polypropylene,” Polymer Engineering and Science, vol. 45, no. 12, pp. 1557–1567, 2005. View at Publisher · View at Google Scholar · View at Scopus
  8. S. Weir, “Predicting surface defects in injection molded PVC components,” Journal of Vinyl and Additive Technology, vol. 16, no. 4, pp. 231–234, 1994. View at Google Scholar · View at Scopus
  9. T. Boronat, V. J. Segui, M. A. Peydro, and M. J. Reig, “Influence of temperature and shear rate on the rheology and processability of reprocessed ABS in injection molding process,” Journal of Materials Processing Technology, vol. 209, no. 5, pp. 2735–2745, 2009. View at Publisher · View at Google Scholar · View at Scopus
  10. X. Bai, D. H. Isaac, and K. Smith, “Reprocessing acrylonitrile-butadiene-styrene plastics: structure-property relationships,” Polymer Engineering and Science, vol. 47, no. 2, pp. 120–130, 2007. View at Publisher · View at Google Scholar · View at Scopus
  11. B. H. Min, “A study on quality monitoring of injection-molded parts,” Journal of Materials Processing Technology, vol. 136, no. 1, pp. 1–6, 2003. View at Publisher · View at Google Scholar · View at Scopus
  12. P. K. Kennedy, Practical and Scientific Aspects of Injection Molding Simulation, chapter 2, Technische Universiteit Eindhoven, Eindhoven, The Netherlands, 2008.
  13. J. Koszkul and J. Nabialek, “Viscosity models in simulation of the filling stage of the injection molding process,” Journal of Materials Processing Technology, vol. 157-158, pp. 183–187, 2004. View at Publisher · View at Google Scholar · View at Scopus
  14. B. E. Tiganis, L. S. Burn, P. Davis, and A. J. Hill, “Thermal degradation of acrylonitrile-butadiene-styrene (ABS) blends,” Polymer Degradation and Stability, vol. 76, no. 3, pp. 425–434, 2002. View at Publisher · View at Google Scholar · View at Scopus
  15. J. B. Adeniyi, “Clarification and discussion of chemical transformations involved in thermal and photo-oxidative degradation of ABS,” European Polymer Journal, vol. 20, no. 3, pp. 291–299, 1984. View at Google Scholar · View at Scopus
  16. M. G. Wyzgoski, “Effects of oven ageing on ABS,” Polymer Engineering and Science, vol. 17, pp. 265–269, 1976. View at Google Scholar · View at Scopus
  17. G.İ. Öztürk, Selected methods of surface engineering applied to materials [M.D. thesis], Graduate School of Engineering and Natural Sciences, Sabanc University, 2004.
  18. J. K. Kim and C. K. Kang, “Basic studies on recycling of ABS resin,” Polymer Plastics Technology and Engineering, vol. 34, no. 6, pp. 875–890, 1995. View at Google Scholar · View at Scopus
  19. D. Salari and H. Ranjbar, “Study on the recycling of ABS resins: simulation of reprocessing and thermo-oxidation,” Iranian Polymer Journal, vol. 17, no. 8, pp. 599–610, 2008. View at Google Scholar · View at Scopus
  20. R. K. Jena, X. Chen, C. Y. Yue, and Y. C. Lam, “Viscosity of COC polymer (TOPAS) near the glass transition temperature: experimental and modeling,” Polymer Testing, vol. 29, no. 8, pp. 933–938, 2010. View at Publisher · View at Google Scholar · View at Scopus
  21. H. S. Kim, J. S. Son, and Y. T. Im, “Gate location design in injection molding of an automobile junction box with integral hinges,” Journal of Materials Processing Technology, vol. 140, no. 1–3, pp. 110–115, 2003. View at Publisher · View at Google Scholar · View at Scopus
  22. A. A. Qaiser, A. Qayyum, and R. Rafiq, “Rheological properties of ABS at low shear rates: effects of phase heterogeneity,” Malaysian Polymer Journ, vol. 4, pp. 29–36, 2009. View at Google Scholar
  23. J.-Z. Liang, “Effects of extrusion conditions on rheological behavior of acrylonitrile-butadiene-styrene terpolymer melt,” Journal of Applied Polymer Science, vol. 85, no. 3, pp. 606–611, 2002. View at Publisher · View at Google Scholar · View at Scopus