Analysis of Incomplete Filling Defect for Injection-Molded Air Cleaner Cover Using Moldflow Simulation

Table 3

Tensile properties of the ABS resin.

Sample code	Tensile properties
	Tensile strength	Elongation at break
	(kgf/cm^2)	(%)
ABS-220°C	442±18	5.0±0.8
ABS-230°C	445±31	4.6±0.7
ABS-240°C	446±14	4.3±1.1
ABS-250°C	446±16	4.3±0.5
ABS-260°C	190±16	3.1±0.7