Table of Contents
Journal of Polymers
Volume 2017 (2017), Article ID 8241859, 11 pages
https://doi.org/10.1155/2017/8241859
Research Article

Variation of the Pole Length in Pole-Oriented Bonded Rings due to the Location and Number of Injection Points

Institute of Polymer Technology, Friedrich-Alexander-Universität Erlangen-Nürnberg, Am Weichselgarten 9, 91058 Erlangen, Germany

Correspondence should be addressed to Katharina H. Kurth

Received 10 November 2016; Revised 12 January 2017; Accepted 17 January 2017; Published 15 February 2017

Academic Editor: Zhong-Ming Li

Copyright © 2017 Katharina H. Kurth and Dietmar Drummer. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. T. Schliesch, “Magnete mit virtuoser Polverteilung,” Sonderdruck Industrieanzeiger, no. 23, pp. 20–21, 2010. View at Google Scholar
  2. C. P. O. Treutler, “Magnetic sensors for automotive applications,” Sensors and Actuators, A: Physical, vol. 91, no. 1-2, pp. 2–6, 2001. View at Publisher · View at Google Scholar · View at Scopus
  3. M. Grönefeld, “Polymergebunde hartmagnetische Werkstoffe,” in Magnetwerkstoffe für Technische Anwendungen, Haus der Technik e.V, Essen, Germany, 2014. View at Google Scholar
  4. B. Hagemann, “Kunststoffgebundene Magnete in der Antriebstechnik—Möglichkeiten und Grenzen,” in Kunststoffgebundene Dauermagnete, Springer, Düsseldorf, Germany, 2004. View at Google Scholar
  5. D. Steingroever, “Kunststoffgebundene, isotrope Magnetwerkstoffe in der Sensorik,” in Kunststoffgebundene Dauermagnete, Springer VDI, Düsseldorf, Germany, 2004. View at Google Scholar
  6. J. R. Brauer, Magnetic Actuators and Sensors, John Wiley & Sons, Hoboken, NJ, USA, 2014.
  7. A. Schmidbauer, “Anforderungen, Anwendungen und Trends kunststoffgebundener Dauermagnete in der Sensorik,” in Kunststoffgebundene Dauermagnete, Springer VDI, Düsseldorf, Germany, 2004. View at Google Scholar
  8. T. Miyagawa, T. Takehara, T. Murakami, and T. Takajo, “A new high-performance plastic magnetic encoder,” SAE Technical Paper 2009-01-1293, 2009. View at Publisher · View at Google Scholar
  9. K. Reif, Ed., Sensoren im Kraftfahrzeug, Springer, Wiesbaden, Germany, 2nd edition, 2012.
  10. I. Dexter Magnetic Technologies, Sensor-Grade Magnets for Position Sensing Applications.
  11. S. Gauthier, “Tracking motion with multipole-magnet Hall sensing,” Motion System Design, vol. 54, no. 10, pp. 34–37, 2012. View at Google Scholar
  12. G. Reppel, “Duroplastgepresste Magnete—Werkstoffe, Verfahren und Eigenschaften,” in Kunststoffgebundene Dauermagnete, Springer, Düsseldorf, Germany, 2004. View at Google Scholar
  13. H. Schumacher, “Elastomergebundene Magnetsysteme,” in Kunststoffgebundene Dauermagnete, Springer VDI, Düsseldorf, Germany, 2004. View at Google Scholar
  14. M. Grönefeld, “Review on bonded magnets,” in Bonded Magnets: Proceedings of the NATO Advanced Research Workshop on Science and Technology of Bonded Magnets, Newark, U.S.A. 22–25 August 2002, NATO Science Series, pp. 1–12, Springer Netherlands, 2003. View at Publisher · View at Google Scholar
  15. A. Gardocki and D. Drummer, “Improvement of the filler orientability during injection molding of multi-polar SmCo-magnets by premagnetization,” in Proceedings of the 2nd International Electric Drives Production Conference (EDPC '12), Nuremberg, Germany, October 2012. View at Publisher · View at Google Scholar · View at Scopus
  16. T. Sakai, K. Nakamura, and A. Morii, “Plastics magnet manufacturing process: mixing, kneading, and injection molding,” International Polymer Processing, vol. 6, no. 1, pp. 26–34, 1991. View at Google Scholar
  17. P. Barlog, S. Gewalt, and T. Wiebel, “Die Anziehungskraft nimmt zu. Polymergebundene Ferritmagnete für die Elektrifizierung im Automobil,” Kunststoffe, vol. 105, no. 9, pp. 177–179, 2015. View at Google Scholar
  18. S. Eimeke, A. Gardocki, S. Amesöder, and E. Schmachtenberg, “Mould design from pole to pole,” Kunststoffe International, no. 5, pp. 70–73, 2007. View at Google Scholar · View at Scopus
  19. K. H. Kurth and D. Drummer, “Improvement of the magnetic properties of injection molded polymer bonded magnets,” in Proceedings of the 3rd International Electric Drives Production Conference (EDPC '13), Nuremberg, Germany, October 2013. View at Publisher · View at Google Scholar
  20. S. Eimeke and G. W. Ehrenstein, “Injection molding tool design for the production of plastic-bonded magnets using FEM-simulation,” in Proceedings of the Rubber & Plastics Technical Conference, Qingdao, China, 2005.
  21. E. Baur, S. Brinkmann, T. Osswald, N. Rudolph, and E. Schmachtenberg, Saechtling Kunststoff Taschenbuch, vol. 31, Carl Hanser, München, Germany, 2013. View at Publisher · View at Google Scholar
  22. T. Schliesch, B. Hagemann, H. Hartnuss, F. Poehlau, D. Steingroever, and D. Drummer, “Combined bonded rotor for DC motors with different magnetic materials and field areas,” IEEE Transactions on Magnetics, vol. 40, no. 4, pp. 2077–2079, 2004. View at Publisher · View at Google Scholar · View at Scopus
  23. S. Eimeke, A. Gardocki, Z. Brocka, and E. Schmachtenberg, “Injection molding of polymer-bonded magnets with multi-polar structure,” in Proceedings of the 66th Annual Technical Conference of the Society of Plastics Engineers, Plastics Encounter at (ANTEC '08), pp. 1504–1508, Milwaukee, Wis, USA, May 2008. View at Scopus
  24. S. Eimeke, Spritzgießen multipolarer, kunststoffgebundener Dauermagnete [Dissertation], Universität Erlangen-Nürnberg, Erlangen, Germany, 2008.
  25. D. Drummer, Verarbeitung und Eigenschaften Kunststoffgebundener Dauermagnete [Dissertation], University of Erlangen-Nuremberg, Erlangen, Germany, 2004.
  26. K. H. Kurth and D. Drummer, “Influences on the magnetic properties of injection molded multipolar rings,” International Polymer Processing, vol. 31, no. 3, pp. 356–363, 2016. View at Publisher · View at Google Scholar · View at Scopus
  27. K. H. Kurth, D. Drummer, and E. Grünewald, “Influences of the variation of process parameters on the pole length of multipolar bonded magnets,” in Proceedings of the SPE ANTEC, Indianapolis, Ind, USA, May 2016.
  28. K. H. Kurth and D. Drummer, “Effect of the variation of the gating system on the magnetic properties of injection molded pole-oriented rings,” Journal of Polymer Engineering, 2016. View at Publisher · View at Google Scholar
  29. C. Heinle, Z. Brocka, G. Hülder, G. W. Ehrenstein, and T. A. Osswald, “Thermal conductivity of polymers filled with non-isometric fillers: a process dependent, anisotropic property,” in Proceedings of the 67th Annual Technical Conference of the Society of Plastics Engineers (ANTEC '09), pp. 883–889, Chicago, Ill, USA, June 2009. View at Scopus