Table of Contents
Journal of Structures
Volume 2014, Article ID 825692, 8 pages
http://dx.doi.org/10.1155/2014/825692
Review Article

Seismic Hybrid Simulation of Stiff Structures: Overview and Current Advances

Department of Civil Engineering, University of Patras, 26504 Patras, Greece

Received 24 September 2013; Accepted 24 February 2014; Published 27 March 2014

Academic Editor: Chris G. Karayannis

Copyright © 2014 Stathis N. Bousias. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. Hakuno, M. Shidawara, and T. Hara, “Dynamic destructive test of a cantilever beam controlled by an analog computer,” Proceedings of the Japan Society of Civil Engineers, vol. 1969, no. 171, pp. 1–9, 1969. View at Google Scholar
  2. K. Takanashi, K. Udagawa, and H. Tanaka, “Earthquake response analysis of steel frames by computer-actuator on-line system,” in Proceedings of the 5th Japan Earthquake Engineering Symposium, pp. 1321–1328, Architecture Institute of Japan (AIJ), Tokyo, Japan, 1978.
  3. F. Seible, G. Hegemier, and A. Igarashi, “Simulated seismic laboratory load testing of full-scale buildings,” Earthquake Spectra, vol. 12, no. 1, pp. 57–86, 1996. View at Google Scholar · View at Scopus
  4. M. V. Sivaselvan, A. M. Reinhorn, X. Shao, and S. Weinreber, “Dynamic force control with hydraulic actuators using added compliance and displacement compensation,” Earthquake Engineering and Structural Dynamics, vol. 37, no. 15, pp. 1785–1800, 2008. View at Publisher · View at Google Scholar · View at Scopus
  5. A. Igarashi, F. Seible, and G. A. Hegemeier, “Development of the pseudodynamic technique for testing a full-scale 5-story shear wall structure,” in Proceedings of the U.S. Japan Seminar on the Development and Future Directions of Structural Testing Techniques, Honolulu, Hawaii, USA, 1990.
  6. T. Elkhoraibi and K. M. Mosalam, “Towards error-free hybrid simulation using mixed variables,” Earthquake Engineering and Structural Dynamics, vol. 36, no. 11, pp. 1497–1522, 2007. View at Publisher · View at Google Scholar · View at Scopus
  7. H. Kim, “Extending hybrid simulation methods in OpenFresco software framework,” Tech. Rep. CE-299, University of California, Berkeley, Calif, USA, 2009. View at Google Scholar
  8. C. A. Whyte and B. Stojadinovic, “Hybrid simulation of the seismic response of squat reinforced concrete shear walls,” PEER Report 2013/02, 2013. View at Google Scholar
  9. P. Pan, M. Nakashima, and H. Tomofuji, “Online test using displacement-force mixed control,” Earthquake Engineering and Structural Dynamics, vol. 34, no. 8, pp. 869–888, 2005. View at Publisher · View at Google Scholar · View at Scopus
  10. N. Nakata, B. F. Spencer, and A. S. Elnashai, “Mixed load/displacement control strategy for hybrid simulation,” in Proceedings of the 4th International Conference on Earthquake Engineering, Taipei, Taiwan, 2006.
  11. M. Ahmadizadeh and G. Mosqueda, “Hybrid simulation with improved operator-splitting integration using experimental tangent stiffness matrix estimation,” Journal of Structural Engineering, vol. 134, no. 12, pp. 1829–1838, 2008. View at Publisher · View at Google Scholar · View at Scopus
  12. C.-C. Hung and S. El-Tawil, “A method for estimating specimen tangent stiffness for hybrid simulation,” Earthquake Engineering and Structural Dynamics, vol. 38, no. 1, pp. 115–134, 2009. View at Publisher · View at Google Scholar · View at Scopus
  13. C. G. Broyden, “A class of methods for solving nonlinear simultaneous equations,” Mathematics of Computation, vol. 19, pp. 577–593, 1965. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at MathSciNet
  14. M. H. Scott and G. L. Fenves, “A krylov subspace accelerator newton algorithm,” in Proceedings of the 4th International Conference on Earthquake Engineering, Taipei, Taiwan, 2006.
  15. H. Kim, B. Stojadinovic, T. Y. Yang, and A. Schellenberg, “Alternative control strategies in hybrid simulation,” in Proceedings of the 2nd EFAST Workshop & 4th International Conference on Advances in Experimental Structural Engineering, JRC, ELSA, Ispra, Italy, 2011.
  16. X. Palios, E. Strepelias, and S. N. Bousias, “A novel strategy for the hybrid simulation of stiff structures,” in Proceedings of the 5th International Conference on Advances in Experimental Structural Engineering, Taipei, Taiwan, 2013.
  17. C. R. Hart, D. A. Kuchma, L. N. Lowes, D. E. Lehman, K. P. Marley, and A. C. Birely, “Testing of RC Walls using advanced load-control and instrumentation methods,” in Proceedings of the 14th World Conference on Earthquake Engineering, Beijing, China, 2008.