Table of Contents
Journal of Thermodynamics
Volume 2015, Article ID 542405, 16 pages
http://dx.doi.org/10.1155/2015/542405
Research Article

Effect of Longitudinal-External-Fins on Fluid Flow Characteristics for Wing-Shaped Tubes Bundle in Crossflow

Mechanical Power Engineering Department, Faculty of Engineering, Zagazig University, Zagazig 44519, Egypt

Received 4 July 2015; Revised 15 September 2015; Accepted 16 September 2015

Academic Editor: Shou-Shing Hsieh

Copyright © 2015 Sayed Ahmed E. Sayed Ahmed et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [6 citations]

The following is the list of published articles that have cited the current article.

  • Mohamed A. Abdelatief, Sayed Ahmed E. Sayed Ahmed, and Osama M. Mesalhy, “Experimental and numerical study on thermal-hydraulic performance of wing-shaped-tubes-bundle equipped with winglet vortex generators,” Heat and Mass Transfer, 2017. View at Publisher · View at Google Scholar
  • Nianben Zheng, Peng Liu, Zhichun Liu, and Wei Liu, “Numerical simulation and sensitivity analysis of heat transfer enhancement in a flat heat exchanger tube with discrete inclined ribs,” International Journal of Heat and Mass Transfer, vol. 112, pp. 509–520, 2017. View at Publisher · View at Google Scholar
  • Anas El Maakoul, Azzeddine Laknizi, Said Saadeddine, Abdellatif Ben Abdellah, Mohamed Meziane, and Mustapha El Metoui, “Numerical design and investigation of heat transfer enhancement and performance for an annulus with continuous helical baffles in a double-pipe heat exchanger,” Energy Conversion and Management, vol. 133, pp. 76–86, 2017. View at Publisher · View at Google Scholar
  • Chidanand K. Mangrulkar, Ashwinkumar S. Dhoble, Shyamal G. Chakrabarty, and Uday S. Wankhede, “Experimental and CFD prediction of heat transfer and friction factor characteristics in cross flow tube bank with integral splitter plate,” International Journal of Heat and Mass Transfer, vol. 104, pp. 964–978, 2017. View at Publisher · View at Google Scholar
  • Mustafa Erguvan, and David MacPhee, “Energy and Exergy Analyses of Tube Banks in Waste Heat Recovery Applications,” Energies, vol. 11, no. 8, pp. 2094, 2018. View at Publisher · View at Google Scholar
  • Sayed Ahmed E. Sayed Ahmed, Emad Z. Ibrahim, Mostafa M. Ibrahim, Mohamed A. Essa, Mohamed A. Abdelatief, and Mohamed N. El-Sayed, “Heat transfer performance evaluation in circular tubes via internal repeated ribs with entropy and exergy analysis,” Applied Thermal Engineering, vol. 144, pp. 1056–1070, 2018. View at Publisher · View at Google Scholar