Table of Contents
Journal of Wind Energy
Volume 2015, Article ID 148680, 10 pages
http://dx.doi.org/10.1155/2015/148680
Research Article

MPPT of Magnus Wind System with DC Servo Drive for the Cylinders and Boost Converter

1Department of Electrical Engineering, Federal University of Santa Maria (UFSM), 97105-900 Santa Maria, RS, Brazil
2Department of Automation and Control Engineering, Federal Institute of Santa Catarina (IFSC), 89813-000 Chapecó, SC, Brazil

Received 5 March 2015; Revised 30 June 2015; Accepted 7 July 2015

Academic Editor: Adrian Ilinca

Copyright © 2015 Maro Jinbo et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Y. Imai and C. Kato, “Research of cylinder with spiral fins for magnus wind turbine,” Seisan Kenkyu, vol. 62, no. 1, pp. 5–9, 2010. View at Publisher · View at Google Scholar
  2. B. R. Munson, D. F. Young, T. H. Okiishi, and W. W. Huebsch, Fundamentals of Fluid Mechanics, John Wiley & Sons, 8th edition, 2009.
  3. F. M. White, Fluid Mechanics, McGraw-Hill, 4th edition, 2012.
  4. V. Nelson, Wind Energy: Renewable Energy and the Environment, CRC Press, 2009.
  5. http://www.mecaro.jp/eng/.
  6. N. Murakami and J. Ito, “Magnus Type Wind Power Generator,” United States Patent. US7.504.740 B2, 2009.
  7. N. M. Bychkov, A. V. Dovgal, and V. V. Kozlov, “Magnus wind turbines as an alternative to the blade ones,” Journal of Physics: Conference Series, vol. 75, no. 1, Article ID 012004, 2007. View at Publisher · View at Google Scholar · View at Scopus
  8. N. Bychkov, A. Dovgal, and A. Sorokin, “Parametric optimization of the magnus wind turbine,” in Proceedings of the International Conference on Methods of Aerophysical Research (ICMAR '08), Akademgorodok, Russia, June-July 2008.
  9. N. M. Bychkov, “Magnus wind turbine, calculated characteristics of the wind wheel,” Thermophysics and Aeromechanics, vol. 15, no. 2, 2008. View at Google Scholar
  10. J. G. Slootweg, S. W. H. de Haan, H. Polinder, and W. L. Kling, “General model for representing variable speed wind turbines in power system dynamics simulations,” IEEE Transactions on Power Systems, vol. 18, no. 1, pp. 144–151, 2003. View at Publisher · View at Google Scholar · View at Scopus
  11. D. Luo, D. Huang, and G. Wu, “Analytical solution on Magnus wind turbine power performance based on the blade element momentum theory,” Journal of Renewable and Sustainable Energy, vol. 3, Article ID 033104, 2011. View at Google Scholar
  12. X. Sun, Y. Zhuang, Y. Cao, D. Huang, and G. Wu, “A three-dimensional numerical study of the Magnus wind turbine with different blade shapes,” Journal of Renewable and Sustainable Energy, vol. 4, no. 6, Article ID 063139, 2012. View at Publisher · View at Google Scholar · View at Scopus
  13. T. Burton, N. Jenkins, D. Sharpe, and E. Bossanyi, Wind Energy Handbook, John Wiley & Sons, New York, NY, USA, 2nd edition, 2011.
  14. A. Monroy and L. Alvarez-Icaza, “Real-time identification of wind turbine rotor power coefficient,” in Proceedings of the 45th IEEE Conference on Decision and Control, pp. 3690–3695, IEEE, San Diego, Calif, USA, December 2006. View at Publisher · View at Google Scholar
  15. M. G. Simões and F. A. Farret, Renewable Energy Systems. Design and Analysis with Induction Generators, CRC Press, 2004.
  16. S. Russel and P. Norvig, Artificial Intelligence—A Modern Approach, Pearson Education, New York, NY, USA, 3rd edition, 2010.
  17. K. Han and G.-Z. Chen, “A novel control strategy of wind turbine MPPT implementation for direct-drive PMSG wind generation imitation platform,” in Proceedings of the IEEE 6th International Power Electronics and Motion Control Conference (IPEMC '09), pp. 2255–2259, May 2009. View at Publisher · View at Google Scholar · View at Scopus
  18. X. Yang, X. Gong, and W. Qiao, “Mechanical sensorless maximum power tracking control for direct-drive PMSG wind turbines,” in Proceedings of the IEEE Energy Conversion Congress and Exposition, pp. 4091–4098, IEEE, Atlanta, Ga, USA, September 2010. View at Publisher · View at Google Scholar
  19. R.-Y. Duan, C.-Y. Lin, and R.-J. Wai, “Maximum-power-extraction algorithm for grid-connected PMSG wind generation system,” in Proceedings of the 32nd Annual Conference on IEEE Industrial Electronics (IECON '06), pp. 4248–4253, IEEE, Paris, France, November 2006. View at Publisher · View at Google Scholar · View at Scopus
  20. L. C. Corrêa, J. M. Lenz, C. G. Ribeiro, J. G. Trapp, and F. A. Farret, “Maximum power point tracking for magnus wind turbines,” in Proceedings of the 39th Annual Conference of the IEEE Industrial Electronics Society (IECON '13), pp. 1718–1722, IEEE, Vienna, Austria, November 2013. View at Publisher · View at Google Scholar
  21. R. Krishnan, Permanent Magnet Synchronous and Brushless DC Motor Drives, CRC, 2010.
  22. J. C. U. Peña, M. A. G. Brito, G. A. Melo, and C. A. Canesin, “A comparative study of MPPT strategies and a novel singlephase integrated buck-boost inverter for small wind energy conversion systems,” in Proceedings of the Brazilian Power Electronics Conference (COBEP '11), pp. 458–465, IEEE, Praiamar, Brazil, September 2011. View at Publisher · View at Google Scholar
  23. I. Barbi, Power Electronics, UFSC, 6th edition, 2006.
  24. UFSM license, http://powersimtech.com/products/psim/.
  25. Prototype, https://www.youtube.com/watch?v=e133RqWtxc4.