Table of Contents
Laser Chemistry
Volume 2008, Article ID 976205, 6 pages
http://dx.doi.org/10.1155/2008/976205
Research Article

Three-Dimensional Modeling of the Heat-Affected Zone in Laser Machining Applications

1Institute of Materials Science and Applied Research, Saulėtekio 9, 2040 Vilnius, Lithuania
2Altechna Co. Ltd., Konstitucijos Avenue 23C-604, 08105 Vilnius, Lithuania
3Laser Research Center, Vilnius University, Saulėtekio 10, 10223 Vilnius, Lithuania
4Research Institute for Electronic Science, Hokkaido University, N21W10, Kitaku, Sapporo 001-0021, Japan

Received 5 May 2008; Accepted 16 September 2008

Academic Editor: Stavros Pissadakis

Copyright © 2008 Martynas Beresna et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Martynas Beresna, Titas Gertus, Rolandas Tomašiūnas, Hiroaki Misawa, and Saulius Juodkazis, “Three-Dimensional Modeling of the Heat-Affected Zone in Laser Machining Applications,” Laser Chemistry, vol. 2008, Article ID 976205, 6 pages, 2008. https://doi.org/10.1155/2008/976205.