Table of Contents
Physics Research International
Volume 2015 (2015), Article ID 532825, 8 pages
http://dx.doi.org/10.1155/2015/532825
Research Article

Structure and Microhardness of Titanium-Based Coatings Formed by Multichamber Detonation Sprayer

1Belgorod State National Research University, Pobeda 85, Belgorod 308015, Russia
2E.O. Paton Electric Welding Institute, NASU, Bozhenko 11, Kiev 03650, Ukraine
3N.N. Semenov Institute of Chemical Physics, RAS, Kosygina 4, Moscow 119991, Russia

Received 14 November 2014; Accepted 3 March 2015

Academic Editor: Martin Kroger

Copyright © 2015 M. Kovaleva et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. W. Diggle, T. C. Downie, and C. W. Goulding, “Anodic oxide films on aluminum,” Chemical Reviews, vol. 69, no. 3, pp. 365–405, 1969. View at Publisher · View at Google Scholar · View at Scopus
  2. S. Wernick, R. Pinner, and P. G. Sheasby, The Surface Treatment and Finishing of Aluminium and Its Alloys, vol. 1, ASM Handbook, ASM International, Novelty, Ohio, USA, 5th edition, 1987.
  3. E. H. Hollingsworth and H. Y. Hunsicker, “Corrosion of aluminum and aluminum alloys,” in ASM Handbook, vol. 13, pp. 583–609, ASM International, Metals Park, Ohio, USA, 9th edition, 1987. View at Google Scholar
  4. H. Schiht, H. Hildebrand, and U. Szumanuski, “Highly corrosion-resistant reflection layer systems on substrates,” GB Patent 2112815, 1983.
  5. A. Vovsi, N. Kashpur, and O. Rashevic, Deposition of Coatings in Vacuum, Zinatne, Riga, Latvia, 1986.
  6. J. A. Mountford, “Titanium—properties, advantages and applications solving the corrosion problems in marine service,” Tech. Rep. 02170, U.S. Navy & Industry Corrosion Technology Information, 2001, RUST 2001. View at Google Scholar
  7. R. R. Boyer, “An overview on the use of titanium in the aerospace industry,” Materials Science and Engineering A, vol. 213, no. 1-2, pp. 103–114, 1996. View at Publisher · View at Google Scholar · View at Scopus
  8. O. E. M. Pohler, “Unalloyed titanium for implants in bone surgery,” Injury, vol. 31, no. 4, pp. D7–D13, 2000. View at Publisher · View at Google Scholar · View at Scopus
  9. M. J. Donachie Jr., Titanium: A Technical Guide, ASM International, Materials Park, Ohio, USA, 2nd edition, 2000.
  10. D. K. Christoulis, S. Guetta, V. Guipont, and M. Jeandin, “The influence of the substrate on the deposition of cold-sprayed titanium: an experimental and numerical study,” Journal of Thermal Spray Technology, vol. 20, no. 3, pp. 523–533, 2011. View at Publisher · View at Google Scholar · View at Scopus
  11. T. Kinos, S. L. Chen, P. Siitonen, and P. Kettunen, “Densification of plasma-sprayed titanium and tantalum coatings,” Journal of Thermal Spray Technology, vol. 5, no. 4, pp. 439–444, 1996. View at Publisher · View at Google Scholar · View at Scopus
  12. ASM Handbook Volume 2: Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, ASM International, 1992.
  13. J. A. Mountford Jr., “Titanium—properties, advantages and applications solving the corrosion problems in marine service,” in Proceedings of the CORROSION, Paper Number 02170, NACE International, Denver, Colo, USA, April 2002.
  14. W.-M. Zhao, C. Liu, L.-X. Dong, and Y. Wang, “Effects of arc spray process parameters on corrosion resistance of Ti coatings,” Journal of Thermal Spray Technology, vol. 18, no. 4, pp. 702–707, 2009. View at Publisher · View at Google Scholar · View at Scopus
  15. Y. Yao, Z. Wang, Z. Zhou, S. Jiang, and J. Shao, “Study on reactive atmospheric plasma-sprayed in situ titanium compound composite coating,” Journal of Thermal Spray Technology, vol. 22, no. 4, pp. 509–517, 2013. View at Publisher · View at Google Scholar · View at Scopus
  16. A. C. Jones and M. L. Hitchman, “Overview of chemical vapour deposition,” in Chemical Vapour Deposition: Precursors, Processes and Applications, chapter 1, pp. 1–36, RSC Publishing, 2008. View at Publisher · View at Google Scholar
  17. R. S. Lima and B. R. Marple, “Nanostructured and conventional titania coatings for abrasion and slurry-erosion resistance sprayed via APS, VPS and HVOF,” in Proceedings of the Thermal Spray Connects: Explore Its Surfacing Potential (ITCS '05), C. C. Berndt, Ed., pp. 552–557, ASM International, Basel, Switzerland, May 2005.
  18. J. Kawakita, S. Kuroda, T. Fukushima, H. Katanoda, K. Matsuo, and H. Fukanuma, “Dense titanium coatings by modified HVOF spraying,” Surface and Coatings Technology, vol. 201, no. 3-4, pp. 1250–1255, 2006. View at Publisher · View at Google Scholar · View at Scopus
  19. K. Kim, M. Watanabe, and K. Mitsuishi, “Microstructure observation on the interface between warm spray deposited titanium powder and steel substrate,” in Proceedings of the Thermal Spray: Crossing Borders (ITSC '08), E. Lugscheider, Ed., pp. 1289–1294, ASM International, Maastricht, The Netherlands, June 2008.
  20. S. H. Zahiri, C. I. Antonio, and M. Jahedi, “Elimination of porosity in directly fabricated titanium via cold gas dynamic spraying,” Journal of Materials Processing Technology, vol. 209, no. 2, pp. 922–929, 2009. View at Publisher · View at Google Scholar · View at Scopus
  21. H. R. Wang, B. R. Hou, J. Wang, Q. Wang, and W.-Y. Li, “Effect of process conditions on microstructure and corrosion resistance of cold-sprayed Ti coatings,” Journal of Thermal Spray Technology, vol. 17, no. 5-6, pp. 736–741, 2008. View at Publisher · View at Google Scholar · View at Scopus
  22. J. Kawakita, H. Katanoda, M. Watanabe, K. Yokoyama, and S. Kuroda, “Warm spraying: an improved spray process to deposit novel coatings,” Surface and Coatings Technology, vol. 202, no. 18, pp. 4369–4373, 2008. View at Publisher · View at Google Scholar · View at Scopus
  23. K.-H. Kim, S. Kuroda, M. Watanabe, R.-Z. Huang, H. Fukanuma, and H. Katanoda, “Comparison of oxidation and microstructure of warm-sprayed and cold-sprayed titanium coatings,” Journal of Thermal Spray Technology, vol. 21, no. 3-4, pp. 550–560, 2012. View at Publisher · View at Google Scholar · View at Scopus
  24. T. Schmidt, F. Gärtner, H. Assadi, and H. Kreye, “Development of a generalized parameter window for cold spray deposition,” Acta Materialia, vol. 54, no. 3, pp. 729–742, 2006. View at Publisher · View at Google Scholar · View at Scopus
  25. T. Marrocco, D. G. McCartney, P. H. Shipway, and A. J. Sturgeon, “Production of titanium deposits by cold-gas dynamic spray: numerical modeling and experimental characterization,” Journal of Thermal Spray Technology, vol. 15, no. 2, pp. 263–272, 2006. View at Publisher · View at Google Scholar · View at Scopus
  26. A. Papyrin, V. Kosarev, S. Klinkov, A. Alkhimov, and V. Fomin, Cold Spray Technology, Elsevier, Amsterdam, The Netherlands, 2007.
  27. M. Kovaleva, Y. Tyurin, O. Kolisnichenko, M. Prozorova, and M. Arseenko, “Properties of detonation nanostructured titanium-based coatings,” Journal of Thermal Spray Technology, vol. 22, no. 4, pp. 518–524, 2013. View at Publisher · View at Google Scholar · View at Scopus
  28. G. Sridhar, S. G. Chowdhury, and N. G. Goswami, Materials Characterization Techniques: Principles and Applications, 1999.
  29. ASTM Standard, “Standard methods of preparing metallographic specimens,” in Annual Book of ASTM Standards E-3-86, vol. 03.01, p. 12, American Society for Metals, 1986. View at Google Scholar
  30. M. Kovaleva, Y. Tyurin, N. Vasilik et al., “Deposition and characterization of Al2O3 coatings by multi-chamber gas-dynamic accelerator,” Surface and Coatings Technology, vol. 232, pp. 719–725, 2013. View at Publisher · View at Google Scholar · View at Scopus
  31. N. Vasilik, N. Tyurin, and O. Kolisnichenko, “Method for gas-dynamic detonating speedup of powders and device for its implementation,” RU Patent 2506341, 2012.
  32. N. J. Vasilik, Y. N. Tyurin, O. V. Kolisnichenko, M. G. Kovaleva, M. S. Prozorova, and M. Y. Arseenko, “Properties, peculiarities and applications of powder coatings formed by multi-chamber detonation sprayer,” Applied Mechanics and Materials, vol. 467, pp. 179–184, 2014. View at Publisher · View at Google Scholar · View at Scopus
  33. G. J. Moskal, “The porosity assessment of thermal barrier coatings obtained by APS method,” Journal of Achievements in Materials and Manufacturing Engineering, vol. 20, no. 1-2, pp. 483–486, 2007. View at Google Scholar
  34. T. Hussain, D. G. McCartney, P. H. Shipway, and T. Marrocco, “Corrosion behavior of cold sprayed titanium coatings and free standing deposits,” Journal of Thermal Spray Technology, vol. 20, no. 1-2, pp. 260–274, 2011. View at Publisher · View at Google Scholar · View at Scopus
  35. M. Kovaleva, Y. Tyurin, M. Arseenko, V. Sirota, and I. Pavlenko, “Titanium nanostructured coatings obtained by multi-chamber gas-dynamic accelerator,” in Proceedings of the 5th International Conference Nanocon, Brno, Czech Republic, October 2013, http://www.nanocon.eu/.
  36. M. Miyayama, K. Koumoto, and H. Yanagida, Engineered Materials Handbook, Volume 4: Ceramics and Glasses, ASM International, Materials Park, Ohio, USA, 1991.
  37. Y. Yao, Z. Wang, Z. Zhou, S. Jiang, and J. Shao, “Study on reactive atmospheric plasma-sprayed in situ titanium compound composite coating,” Journal of Thermal Spray Technology, vol. 22, no. 4, pp. 509–517, 2013. View at Publisher · View at Google Scholar · View at Scopus
  38. R. S. Lima and B. R. Marple, “Optimized HVOF titania coatings,” Journal of Thermal Spray Technology, vol. 12, no. 3, pp. 360–369, 2003. View at Publisher · View at Google Scholar · View at Scopus
  39. H. Okamoto, “O-Ti (Oxygen-Titanium),” Journal of Phase Equilibria and Diffusion, vol. 32, no. 5, pp. 473–474, 2011. View at Publisher · View at Google Scholar
  40. W. Wong, E. Irissou, A. N. Ryabinin, J.-G. Legoux, and S. Yue, “Influence of helium and nitrogen gases on the properties of cold gas dynamic sprayed pure titanium coatings,” Journal of Thermal Spray Technology, vol. 20, no. 1-2, pp. 213–226, 2011. View at Publisher · View at Google Scholar