Table of Contents
Magnetic and Electrical Separation
Volume 7 (1996), Issue 3, Pages 163-184
http://dx.doi.org/10.1155/1996/15891

Magnetogravimetric Separation in a Rotational Device

1Department of Materials Science and Mineral Engineering, University of California, Berkeley CA 94720, USA
2BMG Engineering AG, Ifangstrasse 11, Schlieren, Zurich 8952, Switzerland

Received 11 November 1995; Accepted 2 February 1996

Copyright © 1996 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

R. C. Bunge and D. W. Fuerstenau, “Magnetogravimetric Separation in a Rotational Device,” Magnetic and Electrical Separation, vol. 7, no. 3, pp. 163-184, 1996. doi:10.1155/1996/15891