Table of Contents
Smart Materials Research
Volume 2012 (2012), Article ID 797319, 9 pages
http://dx.doi.org/10.1155/2012/797319
Research Article

Design for the Damping of a Railway Collector Based on the Application of Shape Memory Alloys

1Department of Mechanical Engineering, Politecnico di Milano, Via La Masa, 20156 Milano, Italy
2Institute for Energetics and Interphases, National Research Council (CNR), Corso Promessi Sposi, 23900 Lecco, Italy

Received 6 August 2012; Revised 21 November 2012; Accepted 28 November 2012

Academic Editor: Hideki Hosoda

Copyright © 2012 M. Bocciolone et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. Collina and S. Melzi, “Effect of contact strip–contact wire interaction on current transfer at high sliding speed in the mid-high frequency range,” in Proceedings of the 5th International Conference on Tribology (AITC-AIT '06), Parma, Italy, September 2006.
  2. A. Collina, F. Resta, D. Rocchi, and A. Tosi, “Analisi dei fenomeni aerodinamici dell’interazione pantografo-catenaria (Analysis of the aerodynamic phenomena in pantograph–catenary interaction),” in Proceedings of the 9th Convegno Nazionale di Ingegneria del Vento (IN-VENTO '06), Pescara, Italy, June 2006.
  3. E. Pfinzenmaier, W. F. King, and D. Christ, “Untersuchung zur aerodynamischen und aeroakustischen Optimierung eines Stromabnehmer für den ICE,” AET, no. 49, 1985.
  4. A. Collina, A. Lo Conte, and M. Carnevale, “Effect of collector deformable modes in pantograph-catenary dynamic interaction,” Proceedings of the IMechE Part F: Journal of Rail and Rapid Transit, vol. 223, no. 1, pp. 1–14, 2009. View at Publisher · View at Google Scholar · View at Scopus
  5. R. X. Zhang, Q. Q. Ni, A. Masuda, T. Yamamura, and M. Iwamoto, “Vibration characteristics of laminated composite plates with embedded shape memory alloys,” Composite Structures, vol. 74, no. 4, pp. 389–398, 2006. View at Publisher · View at Google Scholar · View at Scopus
  6. K.-T. Lau, L.-M. Zhou, and X.-M. Tao, “Control of natural frequencies of a clamped-clamped composite beam with embedded shape memory alloy wires,” Composite Structures, vol. 58, pp. 39–47, 2002. View at Google Scholar
  7. C. A. Rogers, C. Liang, and D. Barker, “Control concepts using shape memory alloy reinforced plates,” in Proceedings of the US Army Research Office Workshop on Smart Materials, Structures, and Mathematical Issues, p. 39, Blacksburg, Va, USA, 1988.
  8. M. Dolce and D. Cardone, “Fatigue resistance of SMA-martensite bars subjected to flexural bending,” International Journal of Mechanical Sciences, vol. 47, no. 11, pp. 1693–1717, 2005. View at Publisher · View at Google Scholar · View at Scopus
  9. D. S. Li, X. P. Zhang, Z. P. Xiong, and Y. W. Mai, “Lightweight NiTi shape memory alloy based composites with high damping capacity and high strength,” Journal of Alloys and Compounds, vol. 490, no. 1-2, pp. L15–L19, 2010. View at Publisher · View at Google Scholar · View at Scopus
  10. C. A. Biffi, P. Bassani, A. Tuissi et al., “Flexural vibration suppression of glass Fiber/CuZnAl SMA composite,” Functional Materials Letters, vol. 5, no. 1, Article ID 1250014, 4 pages, 2012. View at Google Scholar
  11. G. Zhou and P. Lloyd, “Design, manufacture and evaluation of bending behaviour of composite beams embedded with SMA wires,” Composites Science and Technology, vol. 69, no. 13, pp. 2034–2041, 2009. View at Publisher · View at Google Scholar · View at Scopus
  12. Y. Matsuzaki, T. Ikeda, and C. Boiler, “New technological development of passive and active vibration control: analysis and test,” Smart Materials and Structures, vol. 14, no. 2, pp. 343–348, 2005. View at Publisher · View at Google Scholar · View at Scopus
  13. F. Taheri-Behrooz, F. Taheri, and R. Hosseinzadeh, “Characterization of a shape memory alloy hybrid composite plate subject to static loading,” Materials and Design, vol. 32, no. 5, pp. 2923–2933, 2011. View at Publisher · View at Google Scholar · View at Scopus
  14. K. Otsuka and C. M. Wayman, Shape Memory Materials, Cambridge University Press, Cambridge, UK, 199..
  15. A. Biscarini, B. Coluzzi, G. Mazzolai, F. M. Mazzolai, and A. Tuissi, “Mechanical spectroscopy of the H-free and H-doped Ni30Ti50Cu20 shape memory alloy,” Journal of Alloys and Compounds, vol. 356-357, pp. 669–672, 2003. View at Publisher · View at Google Scholar · View at Scopus
  16. M. O. Moroni, R. Saldivia, M. Sarrazin, and A. Sepúlveda, “Damping characteristics of a CuZnAlNi shape memory alloy,” Materials Science and Engineering A, vol. 335, no. 1-2, pp. 313–319, 2002. View at Publisher · View at Google Scholar · View at Scopus
  17. Y. H. Li, S. W. Liu, H. C. Jiang et al., “Analysis of the internal friction spectrum of TiNiCu alloy,” Journal of Alloys and Compounds, vol. 430, no. 1-2, pp. 149–152, 2007. View at Publisher · View at Google Scholar · View at Scopus
  18. J. Van Humbeeck, “Damping capacity of thermoelastic martensite in shape memory alloys,” Journal of Alloys and Compounds, vol. 355, no. 1-2, pp. 58–64, 2003. View at Publisher · View at Google Scholar · View at Scopus
  19. J. Van Humbeeck and S. Kustov, “Active and passive damping of noise and vibrations through shape memory alloys: applications and mechanisms,” Smart Materials and Structures, vol. 14, no. 5, pp. S171–S185, 2005. View at Publisher · View at Google Scholar · View at Scopus
  20. J. Raghavan, T. Bartkiewicz, S. Boyko, M. Kupriyanov, N. Rajapakse, and B. Yu, “Damping, tensile, and impact properties of superelastic shape memory alloy (SMA) fiber-reinforced polymer composites,” Composites B, vol. 41, no. 3, pp. 214–222, 2010. View at Publisher · View at Google Scholar · View at Scopus
  21. Y. Xu, K. Otsuka, H. Yoshida et al., “A new method for fabricating SMA/CFRP smart hybrid composites,” Intermetallics, vol. 10, no. 4, pp. 361–369, 2002. View at Publisher · View at Google Scholar · View at Scopus
  22. R. X. Zhang, Q. Q. Ni, A. Masuda, T. Yamamura, and M. Iwamoto, “Vibration characteristics of laminated composite plates with embedded shape memory alloys,” Composite Structures, vol. 74, no. 4, pp. 389–398, 2006. View at Publisher · View at Google Scholar · View at Scopus
  23. A. Tuissi, P. Bassani, R. Casati et al., “Application of SMA composites in the collectors of the railway pantograph for the italian high-speed train,” Journal of Materials Engineering and Performance, vol. 18, no. 5-6, pp. 612–619, 2009. View at Publisher · View at Google Scholar · View at Scopus
  24. S. Arnaboldi, P. Bassani, C. A. Biffi et al., “Microcutting of niticu alloy with pulsed fiber laser,” in Proceedings of ASME 10th Biennial Conference on Engineering Systems Design and Analysis (ESDA '10), pp. 593–602, Istanbul, Turkey, July 2010. View at Publisher · View at Google Scholar · View at Scopus