Table of Contents
Smart Materials Research
Volume 2013, Article ID 201631, 13 pages
http://dx.doi.org/10.1155/2013/201631
Research Article

Process Chain Modelling and Analysis for the High-Volume Production of Thermoplastic Composites with Embedded Piezoceramic Modules

Technische Universität Dresden, Institute of Lightweight Engineering and Polymer Technology (ILK), Holbeinstraße 3, 01307 Dresden, Germany

Received 5 October 2012; Revised 14 January 2013; Accepted 25 February 2013

Academic Editor: Marcelo J. Dapino

Copyright © 2013 W. Hufenbach et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [4 citations]

The following is the list of published articles that have cited the current article.

  • G. Suchaneck, A. Eydam, G. Gerlach, G. Suchaneck, A. Eydam, and G. Gerlach, “Evaluation of the Pyroelectric Response of Embedded Piezoelectrics by Means of a Nyquist Plot,” 2013 Ieee International Ultrasonics Symposium (ius), pp. 1969–1972, 2013. View at Publisher · View at Google Scholar
  • Agnes Eydam, Gunnar Suchaneck, Sophia Esslinger, Andreas Schoenecker, Peter Neumeister, Gerald Gerlach, Agnes Eydam, Gunnar Suchaneck, Sophia Esslinger, Andreas Schoenecker, Peter Neumeister, and Gerald Gerlach, “Polarization Characterization of PZT Disks and of Embedded PZT Plates by Thermal Wave Methods,” Electroceramics Xiv Conference, vol. 1627, pp. 31–36, 2014. View at Publisher · View at Google Scholar
  • Martin Dannemann, Klaudiusz Holeczek, Niels Modler, Anja Winkler, Eric Starke, Manuel Weiß, and Stefan J. Rupitsch, “Development of Material-Integrated Actuator-Sensor-Arrays for Obstacle Sensing,” Advanced Engineering Materials, 2018. View at Publisher · View at Google Scholar
  • Anja Winkler, Niels Modler, Welf-Guntram Drossel, Thomas Mäder, and Carolin Körner, “High-Volume Production-Compatible Technologies for Light Metal and Fiber Composite-Based Components with Integrated Piezoceramic Sensors and Actuators,” Advanced Engineering Materials, 2018. View at Publisher · View at Google Scholar