Table of Contents
Smart Materials Research
Volume 2013 (2013), Article ID 736487, 6 pages
http://dx.doi.org/10.1155/2013/736487
Research Article

Energy Harvesting Using an Analog Circuit under Multimodal Vibration

1Institute of Space and Astronautical Science (ISAS), Japan Aerospace Exploration Agency (JAXA), 3-1-1 Yoshinodai, Chuo Ward, Sagamihara, Kanagawa 252-5210, Japan
2Department of Aerospace Engineering, Tohoku University, 6-6-01 Aoba, Aramaki, Aoba Ward, Sendai, Miyagi 980-8579, Japan

Received 7 October 2012; Accepted 26 December 2012

Academic Editor: Xiaoning Jiang

Copyright © 2013 Shigeru Shimose et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. H. A. Sodano, D. J. Inman, and G. Park, “A review of power harvesting from vibration using piezoelectric materials,” Shock and Vibration Digest, vol. 36, no. 3, pp. 197–205, 2004. View at Publisher · View at Google Scholar · View at Scopus
  2. G. A. Lesieutre, G. K. Ottman, and H. F. Hofmann, “Damping as a result of piezoelectric energy harvesting,” Journal of Sound and Vibration, vol. 269, pp. 991–1002, 2003. View at Google Scholar
  3. A. Badel, D. Guyomar, E. Lefeuvre, and C. Richard, “Efficiency enhancement of a piezoelectric energy harvesting device in pulsed operation by synchronous charge inversion,” Journal of Intelligent Material Systems and Structures, vol. 16, no. 10, pp. 889–901, 2005. View at Publisher · View at Google Scholar · View at Scopus
  4. D. Guyomar, C. Magnet, E. Lefeuvre, and C. Richard, “Power capability enhancement of a piezoelectric transformer,” Smart Materials and Structures, vol. 15, no. 2, pp. 571–580, 2006. View at Publisher · View at Google Scholar · View at Scopus
  5. K. Makihara, J. Onoda, and T. Miyakawa, “Low energy dissipation electric circuit for energy harvesting,” Smart Materials and Structures, vol. 15, no. 5, pp. 1493–1498, 2006. View at Publisher · View at Google Scholar · View at Scopus
  6. W. W. Clark, “Vibration control with state-switched piezoelectric materials,” Journal of Intelligent Material Systems and Structures, vol. 11, no. 4, pp. 263–271, 2000. View at Publisher · View at Google Scholar · View at Scopus
  7. C. Richard, D. Guyomar, D. Audigier, and G. Ching, “Semi-passive damping using continuous switching of a piezoelectric device,” in Smart Structures and Materials—Passive Damping and Isolation, vol. 3672 of Proceedings of SPIE, pp. 104–111, March 1999. View at Scopus
  8. C. Richard, D. Guyomar, D. Audigier, and H. Bassaler, “Enhanced semi passive damping using continuous switching of a piezoelectric device on an inductor,” in Smart Structures and Materials 2000: Damping and Isolation, vol. 3989 of Proceedings of SPIE, pp. 288–299, March 2000. View at Scopus
  9. L. R. Corr and W. W. Clark, “Comparison of low-frequency piezoelectric switching shunt techniques for structural damping,” Smart Materials and Structures, vol. 11, no. 3, pp. 370–376, 2002. View at Publisher · View at Google Scholar · View at Scopus
  10. J. Onoda, K. Makihara, and K. Minesugi, “Energy-recycling semi-active method for vibration suppression with piezoelectric transducers,” AIAA Journal, vol. 41, no. 4, pp. 711–719, 2003. View at Google Scholar · View at Scopus
  11. J. Onoda, “Some advances in energy recycling semi-active vibration suppression,” Advances in Science and Technology, vol. 56, pp. 345–354, 2008. View at Google Scholar
  12. E. Lefeuvre, A. Badel, C. Richard, L. Petit, and D. Guyomar, “High efficiency piezoelectric vibration energy reclamation,” in International Symposium on Smart Structure and Materials, vol. 5390, pp. 379–387, March 2004.
  13. A. Badel, A. Benayad, E. Lefeuvre, L. Lebrun, C. Richard, and D. Guyomar, “Single crystals and nonlinear process for outstanding vibration-powered electrical generators,” IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, vol. 53, no. 4, pp. 673–684, 2006. View at Publisher · View at Google Scholar · View at Scopus
  14. E. Lefeuvre, A. Badel, C. Richard, L. Petit, and D. Guyomar, “A comparison between several vibration-powered piezoelectric generators for standalone systems,” Sensors and Actuators A, vol. 126, no. 2, pp. 405–416, 2006. View at Publisher · View at Google Scholar · View at Scopus
  15. K. Makihara, J. Onoda, and K. Minesugi, “Comprehensive assessment of semi-active vibration suppression including energy analysis,” Journal of Vibration and Acoustics, vol. 129, no. 1, pp. 84–93, 2007. View at Publisher · View at Google Scholar · View at Scopus
  16. K. Makihara, S. Takeuchi, S. Shimose, J. Onoda, and K. Minesugi, “Innovative digital self-powered autonomous system for multimodal vibration suppression,” AIAA Journal, vol. 50, no. 9, pp. 2004–2011, 2012. View at Google Scholar