Table of Contents
Smart Materials Research
Volume 2014 (2014), Article ID 410316, 14 pages
http://dx.doi.org/10.1155/2014/410316
Review Article

Recent Advances in Energy Harvesting Technologies for Structural Health Monitoring Applications

School of Mechanical and Materials Engineering, Washington State University Tri-Cities, 2710 Crimson Way, Richland, WA 99354, USA

Received 23 September 2013; Revised 31 January 2014; Accepted 1 February 2014; Published 13 April 2014

Academic Editor: Hideki Hosoda

Copyright © 2014 Joseph Davidson and Changki Mo. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. G. Park, T. Rosing, M. Todd, C. Farrar, and W. Hodgkiss, “Energy harvesting for structural health monitoring sensor networks,” Journal of Infrastructure Systems, vol. 14, no. 1, pp. 64–79, 2008. View at Publisher · View at Google Scholar · View at Scopus
  2. W. Clark, J. Romeiko, D. Charnegie, G. Kusic, and C. Mo, “A case study in energy harvesting for powering a wireless measurement systems,” in Proceedings of the International Workshop on Structural Health Monitoring (IWSHM '07), pp. 1765–1772, Stanford University, Stanford, Calif, USA, September 2007.
  3. S. Arms, C. Townsend, D. Churchill et al., “Energy harvesting, wireless, structural health monitoring and reporting system,” in Proceedings of the 2nd Asia Pacific Workshop on SHM, Melboune, Australia, December 2008.
  4. L. Wang and F. G. Yuan, “Vibration energy harvesting by magnetostrictive material,” Smart Materials and Structures, vol. 17, no. 4, Article ID 045009, 14 pages, 2008. View at Publisher · View at Google Scholar · View at Scopus
  5. T. V. Galchev, J. McCullagh, R. L. Peterson, and K. Najafi, “Harvesting traffic-induced vibrations for structural health monitoring of bridges,” Journal of Micromechanics and Microengineering, vol. 21, no. 10, Article ID 104005, 13 pages, 2011. View at Publisher · View at Google Scholar · View at Scopus
  6. Z. Li, L. Zuo, J. Kuang, and G. Luhrs, “Energy-harvesting shock absorber with a mechanical motion rectifier,” Smart Materials and Structures, vol. 22, no. 2, Article ID 025008, 10 pages, 2013. View at Publisher · View at Google Scholar
  7. J. Sirohi and R. Mahadik, “Piezoelectric wind energy harvester for low-power sensors,” Journal of Intelligent Material Systems and Structures, vol. 22, no. 18, pp. 2215–2228, 2011. View at Publisher · View at Google Scholar · View at Scopus
  8. N. Wu, Q. Wang, and X. Xie, “Wind energy harvesting with a piezoelectric harvester,” Smart Materials and Structures, vol. 22, no. 9, Article ID 095023, 9 pages, 2013. View at Publisher · View at Google Scholar
  9. F. Khameneifar, S. Arzanpour, and M. Moallem, “A piezoelectric energy harvester for rotary motion applications: design and experiments,” IEEE/ASME Transactions on Mechatronics, vol. 18, no. 5, pp. 1527–1534, 2013. View at Publisher · View at Google Scholar
  10. C. A. Nelson, S. R. Platt, S. E. Hansena, and M. Fateh, “Power harvesting for railroad track safety enhancement using vertical track displacement,” in Active and Passive Smart Structures and Integrated Systems, vol. 7288 of Proceedings of the SPIE, p. 11, San Diego, Calif, USA, April 2009. View at Publisher · View at Google Scholar · View at Scopus
  11. B. Joyce, Development of an electromagnetic energy harvester for monitoring wind turbine blades [M.S. thesis], Virginia Polytechnic Institute and State University, 2011.
  12. M. R. Pearson, M. J. Eaton, R. Pullin, C. A. Featherston, and K. M. Holford, “Energy harvesting for aerospace structural health monitoring systems,” Journal of Physics: Conference Series, vol. 382, no. 1, Article ID 012025, 2012. View at Publisher · View at Google Scholar
  13. M. Rhimi and N. Lajnef, “Tunable energy harvesting from ambient vibrations in civil structures,” Journal of Energy Engineering, vol. 138, no. 4, pp. 185–193, 2012. View at Publisher · View at Google Scholar
  14. J. Davidson and C. Mo, “Piezoelectric energy harvesting with frequency tuning for ventilation system monitoring,” International Journal of Engineering Science and Innovative Technology, vol. 2, no. 5, pp. 114–124, 2013. View at Google Scholar
  15. S. J. Roundy, Energy scavenging for wireless sensor nodes with a focus on vibration to electricity conversion [Ph.D. dissertation], Department of Mechanical Engineering, University of California, Berkeley, calif, USA, 2003.
  16. D. Dumas, F. Lani, T. Monnier, R. Smaili, and J. Loyer, “Damage detection in composite structures using autonomous wireless systems: simulation & validation,” Journal of Physics: Conference Series, vol. 305, no. 1, Article ID 012084, 2011. View at Publisher · View at Google Scholar · View at Scopus
  17. D. Dondi, G. Napoletano, A. Bertacchini, L. Larcher, and P. Pavan, “A WSN system powered by vibrations to improve safety of machinery with trailer,” in Proceedings of the IEEE Conference on Sensors, pp. 28–31, Taipei, Taiwan, October 2012.
  18. T. Ueno and S. Yamada, “Performance of energy harvester using iron-gallium alloy in free vibration,” IEEE Transactions on Magnetics, vol. 47, no. 10, pp. 2407–2409, 2011. View at Publisher · View at Google Scholar · View at Scopus
  19. M. Zucca and O. Bottauscio, “Hysteretic modeling of electrical micro-power generators based on Villari effect,” IEEE Transactions on Magnetics, vol. 48, no. 11, pp. 3092–3095, 2012. View at Publisher · View at Google Scholar
  20. D. Davino, A. Giustiniani, C. Visone, and A. Adly, “Experimental analysis of vibrations damping due to magnetostrictive based energy harvesting,” Journal of Applied Physics, vol. 109, no. 7, Article ID 07E509, 2011. View at Publisher · View at Google Scholar · View at Scopus
  21. A. Erturk, “Piezoelectric energy harvesting for civil infrastructure system applications: moving loads and surface strain fluctuations,” Journal of Intelligent Material Systems and Structures, vol. 22, no. 17, pp. 1959–1973, 2011. View at Publisher · View at Google Scholar · View at Scopus
  22. M. Wischke, M. Masur, M. Kröner, and P. Woias, “Vibration harvesting in traffic tunnels to power wireless sensor nodes,” Smart Materials and Structures, vol. 20, no. 8, Article ID 085014, 8 pages, 2011. View at Publisher · View at Google Scholar · View at Scopus
  23. H.-J. Jung, I.-H. Kim, and J. Park, “Experimental validation of energy harvesting device for civil engineering applications,” in Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, vol. 8345 of Proceedings of the SPIE, p. 4, San Diego, Calif, USA, April 2012. View at Publisher · View at Google Scholar
  24. I.-H. Kim, S.-J. Jang, and H.-J. Jung, “Performance enhancement of a rotational energy harvester utilizing wind-induced vibration of an inclined stay cable,” Smart Materials and Structures, vol. 22, Article ID 075004, 7 pages, 2013. View at Publisher · View at Google Scholar
  25. E. Sazonov, H. Li, D. Curry, and P. Pillay, “Self-powered sensors for monitoring of highway bridges,” IEEE Sensors Journal, vol. 9, no. 11, pp. 1422–1429, 2009. View at Publisher · View at Google Scholar
  26. J. Wardlaw, I. Karaman, and A. Karsılayan, “Low power circuits and energy harvesting for structural health monitoring of bridges,” IEEE Sensors Journal, vol. 13, no. 2, pp. 709–722, 2013. View at Publisher · View at Google Scholar
  27. M. Peigney and D. Siegert, “Piezoelectric energy harvesting from traffic-induced bridge vibrations,” Smart Materials and Structures, vol. 22, no. 9, Article ID 095019, 11 pages, 2013. View at Publisher · View at Google Scholar
  28. H. J. Xiang, J. J. Wang, Z. F. Shi, and Z. W. Zhang, “Theoretical analysis of piezoelectric energy harvesting from traffic induced deformation of pavements,” Smart Materials and Structures, vol. 22, no. 9, Article ID 095024, 9 pages, 2013. View at Publisher · View at Google Scholar
  29. K. Cunefare, E. Skow, A. Erturk, J. Savor, N. Verma, and M. Cacan, “Energy harvesting from hydraulic pressure fluctuations,” Smart Materials and Structures, vol. 22, no. 2, Article ID 025036, 2013. View at Publisher · View at Google Scholar
  30. C. Li and P. Tse, “Fabrication and testing of an energy-harvesting hydraulic damper,” Smart Materials and Structures, vol. 22, no. 6, Article ID 065024, 11 pages, 2013. View at Publisher · View at Google Scholar
  31. Media Release, “Perpetuum wins contract to supply Southeastern Railways with energy harvester powred wireless sensor systems for 148 trains,” June 2013, http://www.perpetuum.com/news.asp.
  32. J.-W. Park, H.-J. Jung, H. Jo, and B. F. Spencer Jr., “Feasibility study of micro-wind turbines for powering wireless sensors on a cable-stayed bridge,” Energies, vol. 5, no. 9, pp. 3450–3464, 2012. View at Publisher · View at Google Scholar
  33. F. J. Xu, F. G. Yuan, J. Z. Hu, and Y. P. Qiu, “Design of a miniature wind turbine for powering wireless sensors,” in Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, vol. 7647 of Proceedings of the SPIE, San Diego, Calif, USA, April 2010. View at Publisher · View at Google Scholar · View at Scopus
  34. H.-J. Jung, S.-W. Lee, and D.-D. Jang, “Feasibility Study on a new energy harvesting electromagnetic device using aerodynamic instability,” IEEE Transactions on Magnetics, vol. 45, no. 10, pp. 4376–4379, 2009. View at Publisher · View at Google Scholar · View at Scopus
  35. A. Abdelkefi, M. R. Hajj, and A. H. Nayfeh, “Piezoelectric energy harvesting from transverse galloping of bluff bodies,” Smart Materials and Structures, vol. 22, no. 1, Article ID 015014, 11 pages, 2013. View at Publisher · View at Google Scholar
  36. A. Abdelkefi, M. R. Hajj, and A. H. Nayfeh, “Modeling and analysis of piezoaeroelastic energy harvesters,” Nonlinear Dynamics, vol. 67, no. 2, pp. 925–939, 2012. View at Publisher · View at Google Scholar · View at Scopus
  37. A. Abdelkefi, M. R. Hajj, and A. H. Nayfeh, “Design of piezoaeroelastic energy harvesters,” Nonlinear Dynamics, vol. 68, no. 4, pp. 519–530, 2012. View at Publisher · View at Google Scholar · View at Scopus
  38. A. Abdelkefi, M. R. Hajj, and A. H. Nayfeh, “Enhancement of power harvesting from piezoaeroelastic systems,” Nonlinear Dynamics, vol. 68, no. 4, pp. 531–541, 2012. View at Publisher · View at Google Scholar · View at Scopus
  39. A. Abdelkefi, M. R. Hajj, and A. H. Nayfeh, “Sensitivity analysis of piezoaeroelastic energy harvesters,” Journal of Intelligent Material Systems and Structures, vol. 23, no. 13, pp. 1523–1531, 2012. View at Publisher · View at Google Scholar
  40. S.-D. Kwon, “A T-shaped piezoelectric cantilever for fluid energy harvesting,” Applied Physics Letters, vol. 97, no. 16, Article ID 164102, 2010. View at Publisher · View at Google Scholar · View at Scopus
  41. Q. Wang, Y. Zhang, N. X. Sun, J. G. McDaniel, and M. L. Wang, “High power density energy harvester with high permeability magnetic material embedded in a rotating wheel,” in Nondestructive Characterization for Composite Materials, Aerospace Engineering, Civil Infrastructure, and Homeland Security, vol. 8347 of Proceedings of the SPIE, p. 6, April 2012. View at Publisher · View at Google Scholar
  42. K. J. Phillips, C. A. Nelson, and M. Fateh, “Simulation and control system of a power harvesting device for railroad track health monitoring,” in Health Monitoring of Structural and Biological Systems, Proceedings of the SPIE, p. 10, San Diego, Calif, USA, March 2011. View at Publisher · View at Google Scholar · View at Scopus
  43. T. Becker, M. Kluge, J. Schalk et al., “Autonomous sensor nodes for aircraft structural health monitoring,” IEEE Sensors Journal, vol. 9, no. 11, pp. 1589–1595, 2009. View at Publisher · View at Google Scholar
  44. D. Samson, T. Otterpohl, M. Kluge, U. Schmid, and T. Becker, “Aircraft-specific thermoelectric generator module,” Journal of Electronic Materials, vol. 39, no. 9, pp. 2092–2095, 2010. View at Publisher · View at Google Scholar · View at Scopus
  45. D. Samson, M. Kluge, T. Becker, and U. Schmid, “Wireless sensor node powered by aircraft specific thermoelectric energy harvesting,” Sensors and Actuators A: Physical, vol. 172, no. 1, pp. 240–244, 2011. View at Publisher · View at Google Scholar · View at Scopus
  46. “MPG-D655 Thin Film Thermogenerator Preliminary Datasheet,” Accessed January 2014, http://micropelt.com/downloads/datasheet_mpg_d655.pdf.
  47. M. Hassan, S.-H. Man, C. Z. Ng, A. Bermak, and C.-C. Chang, “Development of energy harvested wireless sensing node for structural health monitoring,” in Proceedings of the 18th IEEE International Mixed-Signals, Sensors and Systems Test Workshop (IMS3TW '12), pp. 22–27, May 2012.
  48. S. Inamdar, Design of a solar energy harvesting system for structural health monitoring systems [M.S. thesis], The University of Texas, Austin, Tex, USA, 2012.
  49. T. Miller and B. F. Spencer Jr., “Solar energy harvesting and software enhancements for autonomous wireless smrt networks,” NSEL Report Series UILU-ENG-2010-1802, University of Illinois, Champaign, Ill, USA, 2009. View at Google Scholar
  50. S. Jang, H. Jo, S. Cho et al., “Structural health monitoring of a cable-stayed bridge using smart sensor technology: deployment and evaluation,” Smart Structures and Systems, vol. 6, no. 5-6, pp. 439–459, 2010. View at Google Scholar · View at Scopus
  51. V. F. Godínez-Azcuaga, J. Farmer, P. H. Ziehl, V. Giurgiutiu, A. Nanni, and D. J. Inman, “Status in the development of self-powered wireless sensor node for structural health monitoring and prognosis,” in Nondestructive Characterization for Composite Materials, Aerospace Engineering, Civil Infrastructure, and Homeland Security, vol. 8347 of Proceedings of the SPIE, p. 6, San Diego, Calif, USA, April 2012. View at Publisher · View at Google Scholar
  52. K. M. Farinholt, N. Miller, W. Sifuentes, J. MacDonald, G. Park, and C. R. Farrar, “Energy harvesting and wireless energy transmission for embedded SHM sensor nodes,” Structural Health Monitoring, vol. 9, no. 3, pp. 269–280, 2010. View at Publisher · View at Google Scholar · View at Scopus
  53. B. Koser and H. Marinkovic, “Demonstration of wide bandwidth energy harvesting from vibrations,” Smart Materials and Structures, vol. 21, no. 6, Article ID 065006, 2012. View at Publisher · View at Google Scholar
  54. W. Al-Ashtari, M. Hunstig, T. Hemsel, and W. Sextro, “Frequency tuning of piezoelectric energy harvesters by magnetic force,” Smart Materials and Structures, vol. 21, no. 3, Article ID 035019, 2012. View at Publisher · View at Google Scholar · View at Scopus
  55. S. P. Beeby, L. Wang, D. Zhu et al., “A comparison of power output from linear and nonlinear kinetic energy harvesters using real vibration data,” Smart Materials and Strctures, vol. 22, no. 7, Article ID 075022, 15 pages, 2013. View at Publisher · View at Google Scholar
  56. A. Erturk, J. Hoffmann, and D. J. Inman, “A piezomagnetoelastic structure for broadband vibration energy harvesting,” Applied Physics Letters, vol. 94, no. 25, Article ID 254102, 2009. View at Publisher · View at Google Scholar · View at Scopus
  57. J.-T. Lin, B. Lee, and B. Alphenaar, “The magnetic coupling of a piezoelectric cantilever for enhanced energy harvesting efficiency,” Smart Materials and Structures, vol. 19, no. 4, Article ID 045012, 7 pages, 2010. View at Publisher · View at Google Scholar · View at Scopus
  58. A. M. Wickenheiser and E. Garcia, “Broadband vibration-based energy harvesting improvement through frequency up-conversion by magnetic excitation,” Smart Materials and Structures, vol. 19, no. 6, Article ID 065020, 11 pages, 2010. View at Publisher · View at Google Scholar · View at Scopus
  59. L. Liu and F. G. Yuan, “Nonlinear vibration energy harvester using diamagnetic levitation,” Applied Physics Letters, vol. 98, no. 20, Article ID 203507, 2011. View at Publisher · View at Google Scholar · View at Scopus
  60. D. A. W. Barton, S. G. Burrow, and L. R. Clare, “Energy harvesting from vibrations with a nonlinear oscillator,” Journal of Vibration and Acoustics, vol. 132, no. 2, Article ID 021009, 7 pages, 2010. View at Publisher · View at Google Scholar · View at Scopus
  61. F. Cottone, L. Gammaitoni, H. Vocca, M. Ferrari, and V. Ferrari, “Piezoelectric buckled beams for random vibration energy harvesting,” Smart Materials and Structures, vol. 21, no. 3, Article ID 035021, 2012. View at Publisher · View at Google Scholar · View at Scopus