Table of Contents
Smart Materials Research
Volume 2015 (2015), Article ID 748459, 15 pages
http://dx.doi.org/10.1155/2015/748459
Research Article

Thermal Effects on Vibration and Control of Piezocomposite Kirchhoff Plate Modeled by Finite Elements Method

1Equipe Sciences et Technologies Avancées, Ecole Nationale des Sciences Appliquées, Université Abdelmalek Essaadi, 93030 Tétouan, Morocco
2Laboratoire d’Etude des Matériaux Avancés et Applications, Faculté des Sciences et Ecole Supérieure de Technologie, Université Moulay Ismail, 50040 Meknès, Morocco

Received 5 December 2014; Revised 2 April 2015; Accepted 3 April 2015

Academic Editor: Weihua Li

Copyright © 2015 M. Sanbi et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. Görnandt and U. Gabbert, “Finite element analysis of thermopiezoelectric smart structures,” Acta Mechanica, vol. 154, no. 1–4, pp. 129–140, 2002. View at Publisher · View at Google Scholar · View at Scopus
  2. S. S. Vel and R. C. Batra, “Generalized plane strain thermopiezoelectric analysis of multilayered plates,” Journal of Thermal Stresses, vol. 26, no. 4, pp. 353–377, 2003. View at Publisher · View at Google Scholar · View at Scopus
  3. G. L. C. M. de Abreu, J. F. Ribeiro, and V. Steffen Jr., “Finite element modeling of a plate with localized piezoelectric sensors and actuators,” Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol. 26, no. 2, pp. 117–128, 2004. View at Publisher · View at Google Scholar · View at Scopus
  4. J.-F. Deü and A. Benjeddou, “Free-vibration analysis of laminated plates with embedded shear-mode piezoceramic layers,” International Journal of Solids and Structures, vol. 42, no. 7, pp. 2059–2088, 2005. View at Publisher · View at Google Scholar · View at Scopus
  5. N. Tanaka and T. Sanada, “Modal control of a rectangular plate using smart sensors and smart actuators,” Smart Materials and Structures, vol. 16, no. 1, pp. 36–46, 2007. View at Publisher · View at Google Scholar · View at Scopus
  6. M. A. Trindade and A. Benjeddou, “Effective electromechanical coupling coefficients of piezoelectric adaptive structures: critical evaluation and optimization,” Mechanics of Advanced Materials and Structures, vol. 16, no. 3, pp. 210–223, 2009. View at Publisher · View at Google Scholar · View at Scopus
  7. M. Sanbi, R. Saadani, K. Sbai, and M. Rahmoune, “Thermoelastic and pyroelectric couplings effects on dynamics and active control of smart piezolaminated beam modeled by finite element method,” Smart Materials Research, vol. 2014, Article ID 145087, 10 pages, 2014. View at Publisher · View at Google Scholar
  8. H.-J. Ding, F.-L. Guo, and P.-F. Hou, “A general solution for piezothermoelasticity of transversely isotropic piezoelectric materials and its applications,” International Journal of Engineering Science, vol. 38, no. 13, pp. 1415–1440, 2000. View at Publisher · View at Google Scholar · View at Scopus
  9. J. Erhart, E. Kittinger, J. Privratska, and J. Tichy, Fundamentals of Piezoelectric Sensorics: Mechanical, Dielectric, and Thermodynamical Properties of Piezoelectric Materials, Springer, 2010.
  10. A. Erturk, Electromechanical modeling of piezoelectric energy harvesters [Ph.D. thesis], Virginia Polytechnic Institute and State University, 2009.
  11. K. J. Bathe, Finite Element Procedures in Engineering Analysis, Prentice-Hall, 1982.
  12. J. S. Yang and R. C. Batra, “Free vibrations of a linear thermopiezoelectric body,” Journal of Thermal Stresses, vol. 18, no. 2, pp. 247–262, 1995. View at Publisher · View at Google Scholar · View at Scopus
  13. V. Lopes Jr., J. A. Pereira, and D. J. Inman, “Structural FRF acquisition via electric impedance measurement applied to damage location,” in Proceedings of the 18th International Modal Analysis Conference (IMAC '00), European University Association (EUA), San Antonio, Tex, USA, February 2000.