Table of Contents
SRX Dentistry
Volume 2010, Article ID 295137, 8 pages
http://dx.doi.org/10.3814/2010/295137
Research Article

Effect of Primers and Resins on the Shear Bond Strength of Resin Composite to Zirconia

1BioCity Turku Biomaterials Research Program, Department of Biomaterials Science, Institute of Dentistry, University of Turku, Lemminkaisenkatu 2, 20250 Turku, Finland
2Dental Materials Science, Faculty of Dentistry, The University of Hong Kong, Prince Philip Dental Hospital, 34 Hospital Road, Sai Ying Pun, Hong Kong, China

Received 8 November 2009; Revised 20 December 2009; Accepted 10 January 2010

Copyright © 2010 T. T. Heikkinen et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. K. M. Itinoche, M. Özcan, M. A. Bottino, and D. Oyafuso, “Effect of mechanical cycling on the flexural strength of densely sintered ceramics,” Dental Materials, vol. 22, no. 11, pp. 1029–1034, 2006. View at Publisher · View at Google Scholar · View at PubMed
  2. H. Lüthy, F. Filser, O. Loeffel, M. Schumacher, L. J. Gauckler, and C. H. F. Hammerle, “Strength and reliability of four-unit all-ceramic posterior bridges,” Dental Materials, vol. 21, no. 10, pp. 930–937, 2005. View at Publisher · View at Google Scholar · View at PubMed
  3. J. Tinschert, D. Zwez, R. Marx, and K. J. Anusavice, “Structural reliability of alumina-, feldspar-, leucite-, mica- and zirconia-based ceramics,” Journal of Dentistry, vol. 28, no. 7, pp. 529–535, 2000. View at Google Scholar
  4. G. A. Borges, A. M. Sophr, M. F. de Goes, L. C. Sobrinho, and D. C. N. Chan, “Effect of etching and airborne particle abrasion on the microstructure of different dental ceramics,” Journal of Prosthetic Dentistry, vol. 89, no. 5, pp. 479–488, 2003. View at Publisher · View at Google Scholar
  5. H. Lüthy, O. Loeffel, and C. H. F. Hammerle, “Effect of thermocycling on bond strength of luting cements to zirconia ceramic,” Dental Materials, vol. 22, no. 2, pp. 195–200, 2006. View at Publisher · View at Google Scholar · View at PubMed
  6. H. F. Kappert and M. Krah, “Keramiken—eine Übersicht,” Quintessenz Zahntech, vol. 2, pp. 668–704, 2001. View at Google Scholar
  7. J. W. Thurmond, W. W. Barkmeier, and T. M. Wilwerding, “Effect of porcelain surface treatments on bond strengths of composite resin bonded to porcelain,” The Journal of Prosthetic Dentistry, vol. 72, no. 4, pp. 355–359, 1994. View at Google Scholar
  8. M. Kern and S. M. Wegner, “Bonding to zirconia ceramic: adhesion methods and their durability,” Dental Materials, vol. 14, no. 1, pp. 64–71, 1998. View at Google Scholar
  9. J. P. Matinlinna, L. V. J. Lassila, M. Özcan, A. Yli-Urpo, and P. K. Vallittu, “An introduction to silanes and their clinical applications in dentistry,” International Journal of Prosthodontics, vol. 17, no. 2, pp. 155–164, 2004. View at Google Scholar
  10. M. Kern and V. P. Thompson, “Bonding to glass infiltrated alumina ceramic: adhesive methods and their durability,” The Journal of Prosthetic Dentistry, vol. 73, no. 3, pp. 240–249, 1995. View at Google Scholar
  11. C. K. Kajdas, “Importance of the triboemission process for tribochemical reaction,” Tribology International, vol. 38, no. 3, pp. 337–353, 2005. View at Publisher · View at Google Scholar
  12. R. Guggenberger, “Das Rocatec-System—Haftung durhc ribochemische Beschichtung,” Deutsche Zahnarztliche Zeitschrift, vol. 44, no. 11, pp. 874–876, 1989. View at Google Scholar
  13. J. P. Matinlinna and P. K. Vallittu, “Silane based concepts on bonding resin composite to metals,” Journal of Contemporary Dental Practice, vol. 8, no. 2, pp. 001–008, 2007. View at Google Scholar
  14. R. Janda, J.-F. Roulet, M. Wulf, and H.-J. Tiller, “A new adhesive technology for all-ceramics,” Dental Materials, vol. 19, no. 6, pp. 567–573, 2003. View at Publisher · View at Google Scholar
  15. S. S. Atsu, M. A. Kilicarslan, H. C. Kucukesmen, and P. S. Aka, “Effect of zirconium-oxide ceramic surface treatments on the bond strength to adhesive resin,” Journal of Prosthetic Dentistry, vol. 95, no. 6, pp. 430–436, 2006. View at Publisher · View at Google Scholar · View at PubMed
  16. F. Komine, M. Tomic, T. Gerds, and J. R. Strub, “Influence of different adhesive resin cements on the fracture strength of aluminum oxide ceramic posterior crowns,” Journal of Prosthetic Dentistry, vol. 92, no. 4, pp. 359–364, 2004. View at Publisher · View at Google Scholar
  17. M. Özcan and P. K. Vallittu, “Effect of surface conditioning methods on the bond strength of luting cement to ceramics,” Dental Materials, vol. 19, no. 8, pp. 725–731, 2003. View at Publisher · View at Google Scholar
  18. M. N. Aboushelib, C. J. Kleverlaan, and A. J. Feilzer, “Selective infiltration-etching technique for a strong and durable bond of resin cements to zirconia-based materials,” Journal of Prosthetic Dentistry, vol. 98, no. 5, pp. 379–388, 2007. View at Publisher · View at Google Scholar · View at PubMed
  19. J. P. Matinlinna, L. V. J. Lassila, and P. K. Vallittu, “The effect of three silane coupling agents and their blends with a cross-linker silane on bonding a bis-GMA resin to silicatized titanium (a novel silane system),” Journal of Dentistry, vol. 34, no. 10, pp. 740–746, 2006. View at Publisher · View at Google Scholar · View at PubMed
  20. J. P. Matinlinna, L. V. J. Lassila, and P. K. Vallittu, “The effect of five silane coupling agents on the bond strength of a luting cement to a silica-coated titanium,” Dental Materials, vol. 23, no. 9, pp. 1173–1180, 2007. View at Publisher · View at Google Scholar · View at PubMed
  21. J. P. Matinlinna, L. V. J. Lassila, and P. K. Vallittu, “Pilot evaluation of resin composite cement adhesion to zirconia using a novel silane system,” Acta Odontologica Scandinavica, vol. 65, no. 1, pp. 44–51, 2007. View at Publisher · View at Google Scholar · View at PubMed
  22. R. van Noort, S. Noroozi, I. C. Howard, and G. Cardew, “A critique of bond strength measurements,” Journal of Dentistry, vol. 17, no. 2, pp. 61–67, 1989. View at Google Scholar
  23. ISO 10477, “Dentistry —Polymer-Based Crown and Bridge Materials,” Amendment, 1996.
  24. M. S. Gale and B. W. Darvell, “Thermal cycling procedures for laboratory testing of dental restorations,” Journal of Dentistry, vol. 27, no. 2, pp. 89–99, 1999. View at Publisher · View at Google Scholar
  25. G. J. P. Fleming and O. Narayan, “The effect of cement type and mixing on the bi-axial fracture strength of cemented aluminous core porcelain discs,” Dental Materials, vol. 19, no. 1, pp. 69–76, 2003. View at Publisher · View at Google Scholar
  26. B.-K. Kim, H. E.-K. Bae, J.-S. Shim, and K.-W. Lee, “The influence of ceramic surface treatments on the tensile bond strength of composite resin to all-ceramic coping materials,” Journal of Prosthetic Dentistry, vol. 94, no. 4, pp. 357–362, 2005. View at Publisher · View at Google Scholar · View at PubMed
  27. J. P. Matinlinna, T. Heikkinen, M. Özcan, L. V. J. Lassila, and P. K. Vallittu, “Evaluation of resin adhesion to zirconia ceramic using some organosilanes,” Dental Materials, vol. 22, no. 9, pp. 824–831, 2006. View at Publisher · View at Google Scholar · View at PubMed
  28. T. F. Child and W. J. van Ooij, “Application of silane technology to prevent corrosion of metals and improve paint adhesion,” Transactions of the Institute of Metal Finishing, vol. 77, no. 2, pp. 64–70, 1999. View at Google Scholar
  29. T. T. Heikkinen, L. V. J. Lassila, J. P. Matinlinna, and P. K. Vallittu, “Thermocycling effects on resin bond to silicatized and silanized zirconia,” Journal of Adhesion Science and Technology, vol. 23, no. 7-8, pp. 1043–1051, 2009. View at Publisher · View at Google Scholar
  30. T. Wada, “Development of a new adhesive material and its properties,” in Proceedings of the International Symposium on Adhesive Prosthodontics, L. Gettleman, M. M. A. Vrijhoef, and Y. Uchiyama, Eds., Academy of Dental Materials, Amsterdam, The Netherlands, June 1986.
  31. M. Wolfart, F. Lehmann, S. Wolfart, and M. Kern, “Durability of the resin bond strength to zirconia ceramic after using different surface conditioning methods,” Dental Materials, vol. 23, no. 1, pp. 45–50, 2007. View at Publisher · View at Google Scholar · View at PubMed
  32. Y. Taira, K. Yoshida, H. Matsumura, and M. Atsuta, “Phosphate and thiophosphate primers for bonding prosthodontic luting materials to titanium,” The Journal of Prosthetic Dentistry, vol. 79, no. 4, pp. 384–388, 1998. View at Google Scholar
  33. S. R. Hall, T. E. Fischer, P. Gruffel, and C. Carry, “Effect of grain boundary dopants and mean grain size on tribomechanical behavior of highly purified α-alumina in the mild wear regime,” Wear, vol. 181–183, pp. 165–177, 1995. View at Google Scholar
  34. G. B. Prabhu and D. L. Bourell, “The hot hardness testing for superplasticity in nanocrystalline Yttria Stabilized Tetragonal Zirconia,” Scripta Metallurgica et Materiala, vol. 33, no. 5, pp. 761–766, 1995. View at Google Scholar