Table of Contents
Texture
Volume 2, Issue 1, Pages 45-56
http://dx.doi.org/10.1155/TSM.2.45

Oriented Nucleation in the Reverse Transformation of Fe-30 Ni

Institut für Metallkunde und Metallphysik, der Technischen Universität Clausthal, Germany

Received 10 March 1975

Copyright © 1975 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

Reverse transformation of different martensite textures has been investigated. Starting with austenite the martensite was produced by rolling, deep cooling, or by a combined treatment. In most cases, during the reverse transformation the reconstitution of the original austenite texture occurred. This is explained by oriented nucleation of residual austenite during reverse transformation.