Texture, Stress, and Microstructure

Texture, Stress, and Microstructure / 1981 / Article

Open Access

Volume 4 |Article ID 358909 | https://doi.org/10.1155/TSM.4.153

L. C. Tai, Zen-Jue Tan, "A Note on the Rolling Texture of Nickel-Iron-Niobium Alloy", Texture, Stress, and Microstructure, vol. 4, Article ID 358909, 5 pages, 1981. https://doi.org/10.1155/TSM.4.153

A Note on the Rolling Texture of Nickel-Iron-Niobium Alloy

Received04 Nov 1980

Abstract

The nickel-iron-niobium alloy containing about 79% Ni, 8% Nb and 13% Fe in sheet form has been prepared and fabricated. The rolling texture of the alloy after cold reduction of 50 and 94% has been determined by using X-ray counter diffractometer and the results are presented in pole figures. In comparison with Ni-Fe-Mo, the results are discussed from a view of the difference of mechanical hardness between these two categories of alloys.

Copyright © 1981 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.


More related articles

 PDF Download Citation Citation
 Order printed copiesOrder
Views51
Downloads0
Citations

Article of the Year Award: Outstanding research contributions of 2020, as selected by our Chief Editors. Read the winning articles.