Table of Contents
Texture of Crystalline Solids
Volume 4, Issue 3, Pages 153-157

A Note on the Rolling Texture of Nickel-Iron-Niobium Alloy

Central Iron and Steel Research Institute, Beijing, China

Received 4 November 1980

Copyright © 1981 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.


The nickel-iron-niobium alloy containing about 79% Ni, 8% Nb and 13% Fe in sheet form has been prepared and fabricated. The rolling texture of the alloy after cold reduction of 50 and 94% has been determined by using X-ray counter diffractometer and the results are presented in pole figures. In comparison with Ni-Fe-Mo, the results are discussed from a view of the difference of mechanical hardness between these two categories of alloys.