Texture, Stress, and Microstructure

Texture, Stress, and Microstructure / 1987 / Article

Open Access

Volume 7 |Article ID 628152 | https://doi.org/10.1155/TSM.7.1

T. Oyama, J. Wadsworth, "Anisotropy of Microstructure and Strength in Fiber Textured Molybdenum Alloys", Texture, Stress, and Microstructure, vol. 7, Article ID 628152, 10 pages, 1987. https://doi.org/10.1155/TSM.7.1

Anisotropy of Microstructure and Strength in Fiber Textured Molybdenum Alloys

Received09 Jun 1986


Molybdenum and molybdenum alloys exhibit brittle behavior in the transverse direction of wrought bar stock despite having good ductility in the longitudinal direction. This is believed to be due to the presence of cracked-carbide stringers on adversely oriented grain boundaries. In the present paper, the possible role of anisotropy in strength, as a result of the presence of a strong fiber texture, is investigated. It is concluded, both theoretically and experimentally, that anistropy in strength between the transverse and longitudinal direction of barstock containing a perfect fibre texture is not a factor promoting brittle behavior.

Copyright © 1987 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

More related articles

 PDF Download Citation Citation
 Order printed copiesOrder