Texture, Stress, and Microstructure

Texture, Stress, and Microstructure / 1988 / Article

Open Access

Volume 8 |Article ID 343240 | https://doi.org/10.1155/TSM.8-9.191

Hsun Hu, R. S. Cline, "On the Mechanism of Texture Transition in Face Centered Cubic Metals", Texture, Stress, and Microstructure, vol. 8, Article ID 343240, 16 pages, 1988. https://doi.org/10.1155/TSM.8-9.191

On the Mechanism of Texture Transition in Face Centered Cubic Metals

Received23 Jul 1987


It is shown that, if mechanical twinning and deformation faulting on the {112}111 orientation of the rolling texture component are prevented or nullified, such as by cross rolling, the resulting deformation texture is essentially the same for both high-SFE (stacking-fault energy) and low-SFE metals. These observations are consistent with the mechanical twinning mechanism for rolling texture transition from the copper-type to the brass-type as proposed by Wassermann.

Copyright © 1988 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Related articles

No related content is available yet for this article.
 PDF Download Citation Citation
 Order printed copiesOrder

Article of the Year Award: Outstanding research contributions of 2021, as selected by our Chief Editors. Read the winning articles.