Texture, Stress, and Microstructure

Texture, Stress, and Microstructure / 1988 / Article

Open Access

Volume 8 |Article ID 571038 | https://doi.org/10.1155/TSM.8-9.207

A. Schubert, P. Klimanek, K.-E. Hensger, "Texture Changes in Pass-Rolling of Steel Rods", Texture, Stress, and Microstructure, vol. 8, Article ID 571038, 16 pages, 1988. https://doi.org/10.1155/TSM.8-9.207

Texture Changes in Pass-Rolling of Steel Rods

Received08 Aug 1987


Neutron-diffraction was used to study the texture development during pass-rolling of rods of an austenitic (f.c.c.) steel X8CrNiTi18.10 and a ferritic (b.c.c.) material X8CrTi17 in a round→oval→round→oval→round groove sequence. The orientation distributions occurring in the core of the pass-rolled rods can be described in a good approximation in terms of orthorhombic sample symmetry and qualitatively interpreted either as press textures on conditions of anisotropic material flow in the plane perpendicular to the press direction or as rolling textures on condition of large spreading. However, though they must be characterized by components {hkl}uvw the pass-rolling textures are not rolling textures in the usual sense.

Copyright © 1988 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

More related articles

 PDF Download Citation Citation
 Order printed copiesOrder

Related articles

We are committed to sharing findings related to COVID-19 as quickly as possible. We will be providing unlimited waivers of publication charges for accepted research articles as well as case reports and case series related to COVID-19. Review articles are excluded from this waiver policy. Sign up here as a reviewer to help fast-track new submissions.