Table of Contents
Textures and Microstructures
Volume 12 (1990), Issue 1-3, Pages 125-140
http://dx.doi.org/10.1155/TSM.12.125

Interlaboratories Tests of Textures of Zircaloy-4 Tubes. Part 1: Pole Figure Measurements and Calculation of Kearns Coefficients

1D. Tech/SRMA, CEN SACLAY, Gif sur Yvette Cedex F-91191, France
2LM2P, Faculté des Sciences, Ile du Saulcy, Metz Cedex F-57045, France
3LAMM, IUT Saint-Nazaire, BP 420, Saint-Nazaire F-44606, France
4Centre de Recherche d'Ugine-Cezus, Ugine F-73400, France
5ZIRCOTUBE, Usine de Paimboeuf, Paimboeuf F-44560, France
6FRAGEMA, 10 rue J. Récamier, Lyon F-60996, France
7SEM-LECM, CENG, Grenoble Cedex F-38041, France

Received 8 December 1988; Accepted 16 February 1989

Copyright © 1990 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

J. L. Baron, C. Esling, J. L. Feron, et al., “Interlaboratories Tests of Textures of Zircaloy-4 Tubes. Part 1: Pole Figure Measurements and Calculation of Kearns Coefficients,” Textures and Microstructures, vol. 12, no. 1-3, pp. 125-140, 1990. doi:10.1155/TSM.12.125