Texture, Stress, and Microstructure

Texture, Stress, and Microstructure / 1990 / Article

Open Access

Volume 12 |Article ID 824136 | https://doi.org/10.1155/TSM.12.47

H. J. Bunge, "Partial Texture Analysis", Texture, Stress, and Microstructure, vol. 12, Article ID 824136, 17 pages, 1990. https://doi.org/10.1155/TSM.12.47

Partial Texture Analysis

Received17 Feb 1989


The texture is the orientation distribution function of the crystallites of a polycrystalline sample. Being a continuous function of three variables, it requires a large number of values for its complete description. The texture can be expressed in terms of a series expansion. It then requires a large number of coefficients for its complete description. When all functional values or all coefficients are determined from experimental measurements we speak of complete texture analysis. The most important methods for complete texture analysis are individual orientation measurements of a large number of crystals and pole figure measurement followed by pole figure inversion.If only a limited number of values of the texture function or a few of its coefficients are being determined we speak of “partial texture analysis”. The most important methods of partial texture analysis are the fixed angle texture analyzer and the measurement of the anisotropy of physical properties such as Young's modulus magnetic properties, thermal expansion and others.

Copyright © 1990 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Related articles

No related content is available yet for this article.
 PDF Download Citation Citation
 Order printed copiesOrder

Article of the Year Award: Outstanding research contributions of 2021, as selected by our Chief Editors. Read the winning articles.