Texture, Stress, and Microstructure

Texture, Stress, and Microstructure / 1991 / Article
Special Issue

Ninth International Conference on Textures of Materials

View this Special Issue

Open Access

Volume 14 |Article ID 132758 | 6 pages | https://doi.org/10.1155/TSM.14-18.561

Effect of Stress on the Variant Selection in Martensitic Transformation


The anisotropic constraint stress will be induced in the specimens of thin sheets, when they are quenched below Ms temperature without external stress. The characteristics of variant selection phenomenon were studied under these conditions. The texture of γ and α of ferrous alloys were analyzed with X-ray method. The results obtained could be explained satisfactorily with the Bain Strain model as follows:(1) Variant selection phenomenon depends on the orientation of the parent phase and on the Bain strain associated with martensitic transformation.(2) Such variants that have the largest Bain strain components to the sheet normal are selected predominantly, because the occurrence of variants are prevented least of all under the anisotropic constraint stress.

Copyright © 1991 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

10 Views | 0 Downloads | 3 Citations
 PDF  Download Citation  Citation
 Order printed copiesOrder