Ninth International Conference on Textures of MaterialsView this Special Issue
H. Weiland, J. R. Hirsch, "Microstructure and Local Texture in Hot Rolled Aluminum", Texture, Stress, and Microstructure, vol. 14, Article ID 523181, 6 pages, 1991. https://doi.org/10.1155/TSM.14-18.647
Microstructure and Local Texture in Hot Rolled Aluminum
Local textures have been determined in the deformed and partially recrystallized substructure of a hot rolled commercial aluminum alloy by measuring individual grain orientations in a TEM. These local textures were compared to the global textures of the bulk material obtained by conventional X-ray diffraction techniques. Cube oriented nuclei were analyzed and two mechanisms for the development of strong cube textures of hot rolled and subsequently cold rolled and recryslallized aluminum sheet are discussed. These mechanisms are the uniform stability of cube oriented grains during rolling and the generation of cube oriented nuclei by shear strains.
Copyright © 1991 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.