Table of Contents
Textures and Microstructures
Volume 22, Issue 4, Pages 199-218
http://dx.doi.org/10.1155/TSM.22.199

A Method for Measuring Strain by Analyzing Sharpness of ECP With Image Analysis

1Electrical Steel Laboratory, R&D Laboratories III, Nippon Steel Corporation, Edamitu, Yawata-Higashi-ku, Kitakyushu 805, Japan
2Semiconductor Materials Research Laboratory, Electronics R and D Laboratories, Nippon Steel Corporation, Hikari 743, Shimada, Japan

Received 20 September 1990; Accepted 10 December 1993

Copyright © 1994 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Y. Yoshitomi, K. Ohta, J. Harase, and Y. Suga, “A Method for Measuring Strain by Analyzing Sharpness of ECP With Image Analysis,” Textures and Microstructures, vol. 22, no. 4, pp. 199-218, 1994. https://doi.org/10.1155/TSM.22.199.