P. Ratchev, P. van Houtte, B. Verlinden, P. de Smet, P. Neutjens, R. Baartman, P. Drent, "Prediction of Forming Limit Diagrams of Al-Mg Rolled Sheets Taking Texture Into Account", Texture, Stress, and Microstructure, vol. 22, Article ID 345107, 13 pages, 1994. https://doi.org/10.1155/TSM.22.219
Prediction of Forming Limit Diagrams of Al-Mg Rolled Sheets Taking Texture Into Account
Forming limi diagrams of an AA5754 Al-Mg alloy have been calculated, taking the sheet texture into account. An approach based on the Marciniak-Kuszynski defect model for calculating forming limit diagrams (FLD’s) has been used. The influence of different initial parameters on the formability curve has been studied. The influence of different ideal texture components on simulated curves has been investigated as well. A comparison between the simulated and the measured FLD is given and critically discussed.
Copyright © 1994 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.