Characterization of Microstructure and Texture of a Titanium Alloy Corona 5

Benhaddad, S.; Quesne, C.; Penelle, R.

doi:https://doi.org/10.1155/TSM.23.29

Texture, Stress, and Microstructure

/ / Article

On this page

AbstractCopyrightRelated articles

Open Access

Volume 23 |Article ID 838464 | https://doi.org/10.1155/TSM.23.29

S. Benhaddad, C. Quesne, R. Penelle, "Characterization of Microstructure and Texture of a Titanium Alloy Corona 5", Texture, Stress, and Microstructure, vol. 23, Article ID 838464, 8 pages, 1995. https://doi.org/10.1155/TSM.23.29

Characterization of Microstructure and Texture of a Titanium Alloy Corona 5

S. Benhaddad,¹ C. Quesne,¹ and R. Penelle¹

¹Laboratoire de Métallurgie Structurale U.R.A CNRS 1107, Bât 413 Université Paris-Sud, Orsay Cedex 91405, France

Received29 Jul 1994

Abstract

Both parameters, microstructure and texture, are studied on several samples for different processes. The same route, thermomechanical treatment (forging or rolling) followed by solutioning and ageing is carried out with various temperature and deformation amount on an identical titanium alloy CORONA 5.According to three temperature fields: low (α+β), β and high (α+β) three important microstructures are obtained: equiaxed, acicular and bimodal.All measured textures present two components which vary with deformation mode and temperature of both forging and solutioning.

Copyright

Copyright © 1995 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

No related content is available yet for this article.

PDF

Download Citation

Citation

Order printed copiesOrder

Downloads0

Citations