Table of Contents
X-Ray Optics and Instrumentation
Volume 2008 (2008), Article ID 408702, 9 pages
http://dx.doi.org/10.1155/2008/408702
Research Article

Application of Single and Dual Multilayer Optics for Powder X-Ray Diffraction

Kazuo Inamori School of Engineering, Alfred University, Alfred, NY 14802, USA

Received 24 February 2008; Accepted 18 June 2008

Academic Editor: Walter Gibson

Copyright © 2008 Scott T. Misture. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. R. D. Deslattes, J. L. Staudenmann, L. T. Hudson, A. Henins, and J. P. Cline, “Parallel beam powder diffractometry using a laboratory X-ray source,” Advances in X-Ray Analysis, vol. 41, pp. 221–231, 1997. View at Google Scholar
  2. M. D. Dolan, S. Zdzieszynski, and S. T. Misture, “A high-temperature powder diffraction furnace,” Advances in X-Ray Analysis, vol. 46, pp. 50–55, 2003. View at Google Scholar
  3. G. Gutman and B. Verman, “Calculation of improvement to HRXRD system through-put using curved graded multilayers,” Journal of Physics D, vol. 29, no. 6, pp. 1675–1676, 1996. View at Publisher · View at Google Scholar
  4. S. T. Misture, “Rietveld refinement of powder data from multilayer optics,” Advances in X-Ray Analysis, vol. 45, pp. 166–171, 2002. View at Google Scholar
  5. S. T. Misture, “Characterization of glass surfaces and coatings using X-ray reflectivity,” American Ceramic Society Bulletin, vol. 83, no. 1, pp. 27–29, 2004. View at Google Scholar
  6. N. A. Raferty and R. Vogel, “Limitations of asymmetric parallel-beam geometry,” Journal of Applied Crystallography, vol. 37, part 3, pp. 357–361, 2004. View at Publisher · View at Google Scholar
  7. M. Schuster and H. Goebel, “Parallel-beam coupling into channel-cut monochromators using curved graded multilayers,” Journal of Physics D, vol. 28, no. 4A, pp. 270–275, 1995. View at Publisher · View at Google Scholar
  8. M. Wohlschlögel, T. U. Schülli, B. Lantz, and U. Welzel, “Application of a single-reflection collimating multilayer optic for X-ray diffraction experiments employing parallel-beam geometry,” Journal of Applied Crystallography, vol. 41, part 1, pp. 124–133, 2008. View at Publisher · View at Google Scholar
  9. H. Toraya and H. Hibino, “Kα1-Kα2 characteristic of a parabolic graded multilayer,” Journal of Applied Crystallography, vol. 33, part 6, pp. 1317–1323, 2000. View at Publisher · View at Google Scholar
  10. G. Fujinawa and A. Sasaki, “Development of a high-resolution and high-accuracy parallel beam powder diffractometer using laboratory X-ray sources,” X-sen Bunseki no Shinpo, vol. 31, pp. 11–27, 2000. View at Google Scholar
  11. M. S. Haluska, S. A. Speakman, and S. T. Misture, “Crystal structure determinations of three-layer Aurivillius ceramics using a new parallel beam X-ray powder diffractometer,” Advances in X-Ray Analysis, vol. 46, pp. 192–197, 2003. View at Google Scholar
  12. C. Michaelsen, P. Ricardo, D. Anders, M. Schuster, J. Schilling, and H. Göbel, “Improved graded multilayer mirrors for XRD applications,” Advances in X-Ray Analysis, vol. 42, pp. 308–320, 2000. View at Google Scholar
  13. P. S. Whitfield, “Use of double Göbel mirrors with high-temperature stages for powder diffraction—a strategy to avoid severe intensity fade,” Journal of Applied Crystallography, vol. 36, no. 2, part 3, pp. 926–930, 2003. View at Publisher · View at Google Scholar
  14. “X'Pert HighScore Plus,” PANalytical B.V., 2006.
  15. Diffrac Plus: TOPAS, “General Profile Structure and Analysis Software for Powder Diffraction Data,” Bruker AXS, Karlsruhe, Germany, 2005.
  16. R. Jenkins and R. L. Snyder, Introduction to X-Ray Powder Diffractometry, John Wiley & Sons, New York, NY, USA, 1996.
  17. H. P. Klug and L. E. Alexander, X-Ray Diffraction Procedures, John Wiley & Sons, New York, NY, USA, 1974.
  18. S. T. Misture, C. R. Hubbard, and X. L. Wang, “Systematic errors in metal strip diffraction furnaces,” Advances in X-Ray Analysis, vol. 45, pp. 25–30, 2002. View at Google Scholar
  19. R. W. Cheary and A. Coelho, “Fundamental parameters approach to X-ray line-profile fitting,” Journal of Applied Crystallography, vol. 25, part 2, pp. 109–121, 1992. View at Publisher · View at Google Scholar
  20. R. W. Cheary, J. P. Cline, and M. Anast, “Characterisation and modelling of peak shifts in conventional powder diffractometry,” Advances in X-Ray Analysis, vol. 39, pp. 579–587, 1997. View at Google Scholar