Table of Contents
X-Ray Optics and Instrumentation
Volume 2008, Article ID 792540, 9 pages
http://dx.doi.org/10.1155/2008/792540
Research Article

Collimated Magnetron Sputter Deposition for Mirror Coatings

1Nano-Science Center, University of Copenhagen, The H. C. Ørsted Institute, Universitetsparken 5, 2100 Copenhagen, Denmark
2Danish National Space Center, Juliane Maries Vej 30, 2100 Copenhagen, Denmark
3Niels Bohr Institute, University of Copenhagen, The H. C. Ørsted Institute, Universitetsparken 5, 2100 Copenhagen, Denmark

Received 14 February 2008; Accepted 13 May 2008

Academic Editor: Scott Rohrbach

Copyright © 2008 Anette Vickery et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. C. P. Jensen, K. K. Madsen, H. C. Chen, F. E. Christensen, and E. Ziegler, “Coating of the HEFT telescope mirrors: method and results,” in X-Ray and Gamma-Ray Telescopes and Instruments for Astronomy, J. E. Truemper and H. D. Tananbaum, Eds., vol. 4851 of Proceedings of SPIE, pp. 724–733, Waikoloa, Hawaii, USA, August 2002. View at Publisher · View at Google Scholar
  2. J. E. Koglin, F. E. Christensen, W. W. Craig et al., “NuSTAR hard X-ray optics,” in Optics for EUV, X-Ray, and Gamma-Ray Astronomy II, O. Citterio and S. L. O'Dell, Eds., vol. 5900 of Proceedings of SPIE, pp. 266–275, San Diego, Calif, USA, August 2005. View at Publisher · View at Google Scholar
  3. C. P. Jensen, K. K. Madsen, A. Jensen, and F. E. Christensen, “W/SiC and Pt/SiC multilayers for the NuSTAR hard x-ray telescope,” in Optics for EUV, X-Ray, and Gamma-Ray Astronomy II, O. Citterio and S. L. O'Dell, Eds., vol. 5900 of Proceedings of SPIE, pp. 40–46, San Diego, Calif, USA, August 2005. View at Publisher · View at Google Scholar
  4. http://www.lynceantech.com/.
  5. S. M. Rossnagel, D. Mikaelsen, H. Kinoshita, and J. J. Cuomo, “Collimated magnetron sputter deposition,” Journal of Vacuum Science & Technology A, vol. 9, no. 2, pp. 261–265, 1991. View at Publisher · View at Google Scholar
  6. J. Dalla Torre, G. H. Gilmer, D. L. Windt et al., “Microstructure of thin tantalum films sputtered onto inclined substrates: experiments and atomistic simulations,” Journal of Applied Physics, vol. 94, no. 1, pp. 263–271, 2003. View at Publisher · View at Google Scholar
  7. D. M. Broadway, Y. Ya. Platonov, and L. A. Gomez, “Achieving desired thickness gradients on flat and curved substrates,” in X-Ray Optics, Instruments, and Missions II, R. B. Hoover and A. B. C. Walker, Eds., vol. 3766 of Proceedings of SPIE, pp. 262–274, Denver, Colo, USA, July 1999. View at Publisher · View at Google Scholar
  8. J. L. Vossen, “A sputtering technique for coating the inside walls of through-holes in substrates,” Journal of Vacuum Science and Technology, vol. 11, no. 5, pp. 875–877, 1974. View at Publisher · View at Google Scholar
  9. A. Jensen, Optical elements for hard X-ray radiation, Ph. D. Thesis, Niels Bohr Institute, Faculty of Science, University of Copenhagen, Copenhagen, Denmark, 2007.