Table of Contents
X-Ray Optics and Instrumentation
Volume 2010 (2010), Article ID 824387, 6 pages
http://dx.doi.org/10.1155/2010/824387
Research Article

Fabrication and Performance Test of Fresnel Zone Plate with 35 nm Outermost Zone Width in Hard X-Ray Region

1Japan Synchrotron Radiation Research Insitute (JASRI)/SPring-8, Sayo Hyogo 679-5198, Japan
2NTT-AT Nanofabrication Corporation, Atsugi, Kanagawa 243-0018, Japan

Received 29 October 2009; Accepted 17 June 2010

Academic Editor: Ali Khounsary

Copyright © 2010 Yoshio Suzuki et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Yoshio Suzuki, Akihisa Takeuchi, Hisataka Takenaka, and Ikuo Okada, “Fabrication and Performance Test of Fresnel Zone Plate with 35 nm Outermost Zone Width in Hard X-Ray Region,” X-Ray Optics and Instrumentation, vol. 2010, Article ID 824387, 6 pages, 2010. doi:10.1155/2010/824387