Research Article
Analyzing the Effect of Machining Parameters Setting to the Surface Roughness during End Milling of CFRP-Aluminium Composite Laminates
Figure 9
Scanning electron micrographs of the machined surface.
| (a) Speed = 3000 RPM; feed rate = 1200 mm/min; depth of cut = 0.3 mm |
| (b) Speed = 4000 RPM; feed rate = 1600 mm/min; depth of cut = 0.3 mm |
| (c) Speed = 5000 RPM; feed rate = 800 mm/min; depth of cut = 0.3 mm |