Journals
Publish with us
Publishing partnerships
About us
Blog
Advances in Polymer Technology
Journal overview
For authors
For reviewers
For editors
Table of Contents
Special Issues
Advances in Polymer Technology
/
2019
/
Article
/
Fig 13
/
Research Article
Study on External Gas-Assisted Mold Temperature Control for Improving the Melt Flow Length of Thin Rib Products in the Injection Molding Process
Figure 13
Temperature history at four points with different gas sources.
(a) Temperature at point P1
(b) Temperature at point P2
(c) Temperature at point P3
(d) Temperature at point P4