Study on External Gas-Assisted Mold Temperature Control for Improving the Melt Flow Length of Thin Rib Products in the Injection Molding Process

<p>Mold insert for studying melt flow length. (a) Design of mold insert. (b) Experimental mold insert.</p>

Advances in Polymer Technology

fig5

Figure 5

Figure 5: Study on External Gas-Assisted Mold Temperature Control for Improving the Melt Flow Length of Thin Rib Products in the Injection Molding Process 

Figure 5 | Study on External Gas-Assisted Mold Temperature Control for Improving the Melt Flow Length of Thin Rib Products in the Injection Molding Process 