Experimental-Based Optimization of Injection Molding Process Parameters for Short Product Cycle Time

<div>Products resulting from the injection molding experiments. (a) Product with severe volumetric shrinkage (warpage of 8.1 mm and volumetric shrinkage of 6.49 mm<sup>3</sup>), (b) product with severe warpage (warpage of 13.6 mm and volumetric shrinkage of 6.25 mm<sup>3</sup>), and (c) acceptable product (warpage of 2.9 mm and volumetric shrinkage of 2.45 mm<sup>3</sup>).</div>

Advances in Polymer Technology

fig3

Figure 3

Figure 3: Experimental-Based Optimization of Injection Molding Process Parameters for Short Product Cycle Time 