Table of Contents Author Guidelines Submit a Manuscript
Advances in Acoustics and Vibration
Volume 2009, Article ID 574604, 3 pages
http://dx.doi.org/10.1155/2009/574604
Review Article

Analytical Expression for Sound Transmission Loss Calculation: An Improvement to the Existing Method after Singh and Katra

The Iwany Acoustics & Applied Physics Research Group (iARG), Physics Department, Faculty of Mathematics and Natural Sciences, Sebelas Maret University, Jl. Ir. Sutami 36A Kentingan, Solo 57126, Indonesia

Received 12 September 2009; Accepted 23 October 2009

Academic Editor: Fidel E. Hernandez Montero

Copyright © 2009 Iwan Yahya. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. P. Dickens, J. Smith, and J. Wolfe, “Improved precision in measurements of acoustic impedance spectra using resonance free calibration loads and controlled error distribution,” Journal of the Acoustical Society of America, vol. 121, no. 3, pp. 1471–1481, 2007. View at Publisher · View at Google Scholar
  2. S. Sugie, J. Yoshimura, and H. Ogawa, “Absorption characteristics of fibrous material covered with perforated facing and film,” Acoustical Science & Technology, vol. 27, no. 2, pp. 87–96, 2006. View at Publisher · View at Google Scholar
  3. R. Lanoye, G. Vermeir, W. Lauriks, R. Kruse, and V. Mellert, “Measuring the free field acoustic impedance and absorption coefficient of sound absorbing materials with a combined particle velocity-pressure sensor,” Journal of the Acoustical Society of America, vol. 119, no. 5, pp. 2826–2831, 2006. View at Publisher · View at Google Scholar
  4. A. F. Seybert, “Two-sensor methods for the measurement of sound intensity and acoustic properties in ducts,” Journal of the Acoustical Society of America, vol. 83, no. 6, pp. 2233–2239, 1988. View at Publisher · View at Google Scholar
  5. “Standard test method for impedance and absorption of acoustical materials using a tube, two microphones, and a digital analysis system,” American Standard ASTM E 1050-98, 2003.
  6. Z. Tao and A. F. Seybert, “A review of current techniques for measuring muffler transmission loss,” in Proceedings of the SAE Noise and Vibration Conference, 2003.
  7. A. R. Barnard and M. D. Rao, “Measurement of sound transmission loss using modified four microphones impedance tube,” in Proceedings of the ASME Noise Control and Acoustics Division (Noise-Con '04), Baltimore, Md, USA, July 2004.
  8. O. Olivieri and J. S. Bolton, “Measurement of transmission loss of material using a standing wave tube,” in Proceedings of the 35th International Congress on Noise Control Engineering (INTER-NOISE '06), Honolulu, Hawaii, USA, December 2006.
  9. R. Singh and T. Katra, “Development of an impulse technique for measurement of muffler characteristics,” Journal of Sound and Vibration, vol. 56, no. 2, pp. 279–298, 1978. View at Publisher · View at Google Scholar