Table of Contents Author Guidelines Submit a Manuscript
Applied Bionics and Biomechanics
Volume 2017, Article ID 2014961, 7 pages
https://doi.org/10.1155/2017/2014961
Research Article

Using a Bayesian Network to Predict L5/S1 Spinal Compression Force from Posture, Hand Load, Anthropometry, and Disc Injury Status

Departments of Orthopaedic Surgery, Biomedical Engineering, and Industrial & Operations Engineering, University of Michigan, Ann Arbor, MI 48109, USA

Correspondence should be addressed to Richard E. Hughes; ude.hcimu@sehguher

Received 3 July 2017; Accepted 14 September 2017; Published 1 October 2017

Academic Editor: Craig P. McGowan

Copyright © 2017 Richard E. Hughes. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. G. A. Mirka and W. S. Marras, “A stochastic model of trunk muscle coactivation during trunk bending,” Spine, vol. 18, no. 11, pp. 1396–1409, 1993. View at Google Scholar
  2. C. F. Lin, M. Gross, C. Ji et al., “A stochastic biomechanical model for risk and risk factors of non-contact anterior cruciate ligament injuries,” Journal of Biomechanics, vol. 42, no. 4, pp. 418–423, 2009. View at Publisher · View at Google Scholar · View at Scopus
  3. S. G. McLean, X. Huang, and A. J. van den Bogert, “Investigating isolated neuromuscular control contributions to non-contact anterior cruciate ligament injury risk via computer simulation methods,” Clinical Biomechanics, vol. 23, no. 7, pp. 926–936, 2008. View at Publisher · View at Google Scholar · View at Scopus
  4. P. L. Davidson, D. J. Chalmers, and B. D. Wilson, “Stochastic-rheological simulation of free-fall arm impact in children: application to playground injuries,” Computer Methods in Biomechanics and Biomedical Engineering, vol. 7, no. 2, pp. 63–71, 2004. View at Publisher · View at Google Scholar · View at Scopus
  5. N. G. Flieg, C. J. Gatti, L. C. Doro, J. E. Langenderfer, J. E. Carpenter, and R. E. Hughes, “A stochastic analysis of glenoid inclination angle and superior migration of the humeral head,” Clinical Biomechanics, vol. 23, no. 5, pp. 554–561, 2008. View at Publisher · View at Google Scholar · View at Scopus
  6. J. E. Langenderfer, R. E. Hughes, and J. E. Carpenter, “A stochastic model of elbow flexion strength for subjects with and without long head biceps tear,” Computer Methods in Biomechanics and Biomedical Engineering, vol. 8, no. 5, pp. 315–322, 2005. View at Publisher · View at Google Scholar · View at Scopus
  7. J. E. Langenderfer, J. E. Carpenter, M. E. Johnson, K. N. An, and R. E. Hughes, “A probabilistic model of glenohumeral external rotation strength for healthy normals and rotator cuff tear cases,” Annals of Biomedical Engineering, vol. 34, no. 3, pp. 465–476, 2006. View at Publisher · View at Google Scholar · View at Scopus
  8. F. J. Valero-Cuevas, M. E. Johanson, and J. D. Towles, “Towards a realistic biomechanical model of the thumb: the choice of kinematic description may be more critical than the solution method or the variability/uncertainty of musculoskeletal parameters,” Journal of Biomechanics, vol. 36, no. 7, pp. 1019–1030, 2003. View at Publisher · View at Google Scholar · View at Scopus
  9. J. N. Chopp-Hurley, J. E. Langenderfer, and C. R. Dickerson, “Probabilistic evaluation of predicted force sensitivity to muscle attachment and glenohumeral stability uncertainty,” Annals of Biomedical Engineering, vol. 42, no. 9, pp. 1867–1879, 2014. View at Publisher · View at Google Scholar · View at Scopus
  10. J. N. Chopp-Hurley, J. E. Langenderfer, and C. R. Dickerson, “A probabilistic orthopaedic population model to predict fatigue-related subacromial geometric variability,” Journal of Biomechanics, vol. 49, 2016. View at Publisher · View at Google Scholar · View at Scopus
  11. J. E. Langenderfer, P. J. Rullkoetter, A. G. Mell, and P. J. Laz, “A multi-subject evaluation of uncertainty in anatomical landmark location on shoulder kinematic description,” Computer Methods in Biomechanics and Biomedical Engineering, vol. 12, no. 2, pp. 211–216, 2009. View at Publisher · View at Google Scholar · View at Scopus
  12. D. M. S. Donnell, J. L. Seidelman, C. L. Mendias, B. S. Miller, J. E. Carpenter, and R. E. Hughes, “A stochastic structural reliability model explains rotator cuff repair retears,” International Biomechanics, vol. 1, no. 1, pp. 29–35, 2014. View at Publisher · View at Google Scholar · View at Scopus
  13. S. K. Easley, S. Pal, P. R. Tomaszewski, A. J. Petrella, P. J. Rullkoetter, and P. J. Laz, “Finite element-based probabilistic analysis tool for orthopaedic applications,” Computer Methods and Programs in Biomedicine, vol. 85, no. 1, pp. 32–40, 2007. View at Publisher · View at Google Scholar · View at Scopus
  14. P. J. Laz, S. Pal, J. P. Halloran, A. J. Petrella, and P. J. Rullkoetter, “Probabilistic finite element prediction of knee wear simulator mechanics,” Journal of Biomechanics, vol. 39, no. 12, pp. 2303–2310, 2006. View at Publisher · View at Google Scholar · View at Scopus
  15. J. Pearl, “Fusion, propagation, and structuring in belief networks,” Artificial Intelligence, vol. 29, pp. 241–288, 1986. View at Publisher · View at Google Scholar · View at Scopus
  16. J. Pearl, Probabilistic Reasoning in Intelligent Systems: Networks of Plausible Inference, Morgan Kaufmann, San Francisco, CA, USA, 1988.
  17. M. Neil, N. Fenton, and M. Tailor, “Using Bayesian networks to model expected and unexpected operational losses,” Risk Analysis, vol. 25, no. 4, pp. 963–972, 2005. View at Publisher · View at Google Scholar · View at Scopus
  18. M. Neil, N. Fenton, S. Forey, N. Fenton, and R. Harris, “Using Bayesian belief networks to predict the reliability of military vehicles,” Computing and Control Engineering Journal, vol. 12, no. 1, pp. 11–20, 2001. View at Publisher · View at Google Scholar
  19. A. Bobbio, L. Portinale, M. Minichino, and E. Ciancamerla, “Improving the analysis of dependable systems by mapping fault trees into Bayesian networks,” Reliability Engineering and System Theory, vol. 71, pp. 249–260, 2001. View at Publisher · View at Google Scholar · View at Scopus
  20. H. Langseth and L. Portinale, “Applications of Bayesian networks in reliability analysis,” in Bayesian Network Technologies: Applications and Graphical Models, A. Mittal and A. Kassim, Eds., pp. 84–102, IGI Publishing, New York, NY, USA, 2007. View at Publisher · View at Google Scholar · View at Scopus
  21. H. Langseth and L. Portinale, “Bayesian networks in reliability,” Reliability Engineering & System Safety, vol. 92, no. 1, pp. 92–108, 2007. View at Publisher · View at Google Scholar · View at Scopus
  22. D. Koller and N. Friedman, Probabilistic Graphical Models: Principles and Techniques, MIT Press, Cambridge, MA, USA, 2009.
  23. D. B. Chaffin, “A computerized biomechanical model—development of and use in studying gross body actions,” Journal of Biomechanics, vol. 2, pp. 429–441, 1969. View at Publisher · View at Google Scholar
  24. D. B. Chaffin and M. Erig, “Three-dimensional biomechanical static strength prediction model sensitivity to postural and anthropometric inaccuracies,” IIE Transactions, vol. 23, no. 3, pp. 215–227, 1991. View at Publisher · View at Google Scholar · View at Scopus
  25. K. P. Granata and W. S. Marras, “An EMG-assisted model of trunk loading during free-dynamic lifting,” Journal of Biomechanics, vol. 28, no. 11, pp. 1309–1317, 1995. View at Publisher · View at Google Scholar · View at Scopus
  26. M. A. Nussbaum and D. B. Chaffin, “Lumbar muscle force estimation using a subject-invariant 5-parameter EMG-based model,” Journal of Biomechanics, vol. 31, pp. 667–672, 1998. View at Publisher · View at Google Scholar · View at Scopus
  27. J. Cholewicki, S. M. McGill, and R. W. Norman, “Comparison of muscle forces and joint load from an optimization and EMG assisted lumbar spine model: towards development of a hybrid approach,” Journal of Biomechanics, vol. 28, no. 3, pp. 321–331, 1995. View at Publisher · View at Google Scholar · View at Scopus
  28. S. M. McGill and R. W. Norman, “1986 Volvo award in biomechanics: partitioning of the L4 - L5 dynamic moment into disc, ligamentous, and muscular components during lifting,” Spine, vol. 11, no. 7, pp. 666–678, 1986. View at Publisher · View at Google Scholar
  29. D. B. Chaffin, G. B. J. Andersson, and B. J. Martin, Occupational Biomechanics, Wiley-Interscience, Hoboken, NJ, USA, 2006.
  30. N. Fenton and M. Neil, Risk Assessment and Decision Analysis with Bayesian Networks, CRC Press, Boca Raton, FL, USA, 2013.
  31. S. L. Lauritzen and D. J. Spiegelhalter, “Local computations with probabilities on graphical structures and their application to expert systems,” Journal of the Royal Statistical Society, Series B, vol. 50, no. 2, pp. 157–224, 1988. View at Google Scholar
  32. C. K. Anderson, D. B. Chaffin, and G. D. Herrin, “A study of lumbosacral orientation under varied static loads,” Spine, vol. 11, no. 5, pp. 456–462, 1986. View at Publisher · View at Google Scholar
  33. Y. Liu, X. Zhang, and D. Chaffin, “Preception and visualization of human posture information for computer-aided ergonomic analysis,” Ergonomics, vol. 40, no. 8, pp. 818–833, 1997. View at Publisher · View at Google Scholar · View at Scopus
  34. R. C. Geary, “The ratio of the mean deviation to the standard deviation as a test of normality,” Biometrika, vol. 27, no. 3/4, pp. 310–332, 1935. View at Publisher · View at Google Scholar
  35. R. E. Hughes, “Choice of optimization models for predicting spinal forces in a three-dimensional analysis of heavy work,” Ergonomics, vol. 38, no. 12, pp. 2476–2484, 1995. View at Publisher · View at Google Scholar · View at Scopus
  36. P. Thoft-Christensen and M. J. Baker, Structural Reliability Theory and its Applications, Springer, New York, NY, USA, 1982. View at Publisher · View at Google Scholar
  37. M. A. Adams and W. C. Hutton, “Prolapsed intervertebral disc. A hyperflexion injury 1981 Volvo award in basic science,” Spine, vol. 7, no. 3, pp. 184–191, 1982. View at Google Scholar
  38. J. Pearl, Causality: Models, Reasoning, and Inference, Cambridge University Press, New York, NY, USA, 2009.
  39. P. Spirtes, C. Glymour, and R. Scheines, Causation, Prediction, and Search, MIT Press, London, 2000.
  40. P. J. Laz, J. Q. Stowe, M. A. Baldwin, A. J. Petrella, and P. J. Rullkoetter, “Incorporating uncertainty in mechanical properties for finite element-based evaluation of bone mechanics,” Journal of Biomechanics, vol. 40, no. 13, pp. 2831–2836, 2007. View at Publisher · View at Google Scholar · View at Scopus
  41. L. Van Gestel, T. De Laet, E. Di Lello et al., “Probabilistic gait classification in children with cerebral palsy: a Bayesian approach,” Research in Developmental Disabilities, vol. 32, no. 6, pp. 2542–2552, 2011. View at Publisher · View at Google Scholar · View at Scopus
  42. B. Lo, J. Pansiot, and G.-Z. Yang, “Bayesian analysis of sub-plantar ground reaction force with BSN,” in Sixth International Workshop on Wearable and Implantable Body Sensor Networks, 2009. BSN 2009, Berkeley, CA, USA, 2009, The Institute of Electrical and Electronics Engineers. View at Publisher · View at Google Scholar · View at Scopus
  43. H. T. Ma, J. F. Griffith, Z. Yang, A. W. Kwok, P. C. Leung, and R. Y. Lee, “Kinematics of the lumbar spine in elderly subjects with decreased bone mineral density,” Medical & Biological Engineering & Computing, vol. 47, no. 7, pp. 783–789, 2009. View at Publisher · View at Google Scholar · View at Scopus
  44. S. Takenaka and H. Aono, “Prediction of postoperative clinical recovery of drop foot attributable to lumbar degenerative diseases, via a Bayesian network,” Clinical Orthopaedics and Related Research, vol. 475, no. 3, pp. 872–880, 2017. View at Publisher · View at Google Scholar · View at Scopus
  45. D. Straub and A. Der Kiureghian, “Bayesian network enhanced with structural reliability methods: methodology,” Journal of Engineering Mechanics, vol. 136, no. 10, pp. 1248–1258, 2010. View at Publisher · View at Google Scholar · View at Scopus
  46. S. Gallagher, W. S. Marras, A. S. Litsky, and D. Burr, “An exploratory study of loading and morphometric factors associated with specific failure modes in fatigue testing of lumbar motion segments,” Clinical Biomechanics, vol. 21, no. 3, pp. 228–234, 2006. View at Publisher · View at Google Scholar · View at Scopus
  47. R. J. Parkinson and J. P. Callaghan, “The role of dynamic flexion in spine injury is altered by increasing dynamic load magnitude,” Clinical Biomechanics, vol. 24, no. 2, pp. 148–154, 2009. View at Publisher · View at Google Scholar · View at Scopus
  48. V. R. Yingling and S. M. McGill, “Mechanical properties and failure mechanics of the spine under posterior shear load: observations from a porcine model,” Journal of Spinal Disorders, vol. 12, no. 6, pp. 501–508, 1999. View at Google Scholar