Table of Contents Author Guidelines Submit a Manuscript
Applied Bionics and Biomechanics
Volume 2017, Article ID 5638680, 14 pages
https://doi.org/10.1155/2017/5638680
Research Article

Structural-Geometric Functionalization of the Additively Manufactured Prototype of Biomimetic Multispiked Connecting Ti-Alloy Scaffold for Entirely Noncemented Resurfacing Arthroplasty Endoprostheses

1Department of Medical Bioengineering Fundamentals, Institute of Technology, Casimir the Great University, Chodkiewicza 30, 85-064 Bydgoszcz, Poland
2Department of Process Engineering, Institute of Technology and Chemical Engineering, Poznań University of Technology, Berdychowo 4, 60-965 Poznań, Poland
3Department of Spine Surgery, Oncologic Orthopaedics and Traumatology, Poznan University of Medical Sciences, 28 Czerwca 1956 135/147, 61-545 Poznań, Poland

Correspondence should be addressed to Mariusz Winiecki; lp.ude.wku@ikceiniw

Received 27 February 2017; Accepted 31 May 2017; Published 13 July 2017

Academic Editor: Antonio Gloria

Copyright © 2017 Ryszard Uklejewski et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. G. Campoli, M. S. Borleffs, S. Amin Yavari, R. Wauthle, H. Weinans, and A. A. Zadpoor, “Mechanical properties of open-cell metallic biomaterials manufactured using additive manufacturing,” Materials & Design, vol. 49, pp. 957–965, 2013. View at Publisher · View at Google Scholar · View at Scopus
  2. T. Imwinkelried, “Mechanical properties of open-pore titanium foam,” Journal of Biomedical Materials Research Part A, vol. 81, pp. 964–970, 2007. View at Publisher · View at Google Scholar · View at Scopus
  3. B. S. Van, Y. C. Chai, S. Truscello et al., “The effect of pore geometry on the in vitro biological behavior of human periosteum-derived cells seeded on selective laser-melted Ti6Al4V bone scaffolds,” Acta Biomaterialia, vol. 8, pp. 2824–2834, 2012. View at Google Scholar
  4. S. A. Yavari, R. Wauthle, J. Van der Stok et al., “Fatigue behavior of porous biomaterials manufactured using selective laser melting,” Materials Science & Engineering C, Materials for Biological Applications, vol. 33, pp. 4849–4858, 2013. View at Publisher · View at Google Scholar · View at Scopus
  5. J. J. de Damborenea, M. A. Larosa, M. A. Arenas et al., “Functionalization of Ti6Al4V scaffolds produced by direct metal laser for biomedical applications,” Materials & Design, vol. 83, pp. 6–13, 2015. View at Publisher · View at Google Scholar · View at Scopus
  6. J.-B. Lee, M.-K. Ahn, Y.-H. Koh, H. Lee, and H.-E. Kim, “Ti scaffolds with tailored porosities and mechanical properties using porous polymer templates,” Materials & Design, vol. 101, pp. 323–331, 2016. View at Publisher · View at Google Scholar · View at Scopus
  7. F. H. Liu, R. T. Lee, W. H. Lin, and Y. S. Liao, “Selective laser sintering of bio-metal scaffold,” Procedia CIRP, vol. 5, pp. 83–87, 2013. View at Publisher · View at Google Scholar · View at Scopus
  8. P. Rogala, “Endoprosthesis,” UE Patent 072418 B1, 1999.
  9. P. Rogala, “Acetabulum endoprosthesis and head,” US Patent 5,91,759, 1999.
  10. P. Rogala, “Method and endoprosthesis to apply this implantation,” Canadian Patent 2,200,064, 2002.
  11. R. Uklejewski, P. Rogala, M. Winiecki, and J. Mielniczuk, “Prototype of innovating bone tissue preserving THRA endoprosthesis with multi-spiked connecting scaffold manufactured in selective laser melting technology,” Engineering of Biomaterials, vol. 12, pp. 2–6, 2009. View at Google Scholar
  12. R. Uklejewski, P. Rogala, M. Winiecki, and J. Mielniczuk, “Prototype of minimally invasive hip resurfacing endoprostheses – bioengineering design and manufacturing,” Acta of Bioengineering and Biomechanics, vol. 11, pp. 65–70, 2009. View at Google Scholar
  13. R. Uklejewski, P. Rogala, M. Winiecki, and J. Mielniczuk, “Projektowanie i kształtowanie przyrostowe minimalnie inwazyjnej endoprotezy powierzchniowej stawu biodrowego z wieloszpilkowym rusztowaniem łączącym (eng. title: Design and rapid prototyping of minimal-invasive total hip resurfacing arthroplasty endoprosthesis with multi-spiked connecting scaffold),” Mechanik, vol. 83, pp. 464–647, 2010, (In Polish). View at Google Scholar
  14. R. Uklejewski, M. Winiecki, P. Rogala, and J. Mielniczuk, “Selective laser melted prototype of original minimally invasive hip endoprostheses,” Rapid Prototyping Journal, vol. 17, pp. 76–85, 2011. View at Publisher · View at Google Scholar · View at Scopus
  15. Z. Wang, C. Wang, C. Li et al., “Analysis of factors influencing bone ingrowth into three-dimensional printed porous metal scaffolds: a review,” Journal of Alloys and Compounds, vol. 717, pp. 271–285, 2017. View at Publisher · View at Google Scholar
  16. X. Wang, S. Xu, S. Zhou et al., “Topological design and additive manufacturing of porous metals for bone scaffolds and orthopaedic implants: a review,” Biomaterials, vol. 83, pp. 127–141, 2016. View at Publisher · View at Google Scholar · View at Scopus
  17. N. Taniguchi, S. Fujibayashi, M. Takemoto et al., “Effect of pore size on bone ingrowth into porous titanium implants fabricated by additive manufacturing: an in vivo experiment,” Materials Science & Engineering C, Materials for Biological Applications, vol. 59, pp. 690–701, 2016. View at Publisher · View at Google Scholar · View at Scopus
  18. J. Matena, S. Petersen, M. Gieseke et al., “SLM produced porous titanium implant improvements for enhanced vascularization and osteoblast seeding,” International Journal of Molecular Sciences, vol. 16, pp. 7478–7492, 2015. View at Publisher · View at Google Scholar · View at Scopus
  19. T. Van Cleynenbreugel, J. Schrooten, H. Van Oosterwyck, and J. Vander Sloten, “Micro-CT-based screening of biomechanical and structural properties of bone tissue engineering scaffolds,” Medical & Biological Engineering & Computing, vol. 44, pp. 517–525, 2006. View at Publisher · View at Google Scholar · View at Scopus
  20. B. Otsuki, M. Takemoto, S. Fujibayashi, M. Neo, T. Kokubo, and T. Nakamura, “Pore throat size and connectivity determine bone and tissue ingrowth into porous implants: three-dimensional micro-CT based structural analyses of porous bioactive titanium implants,” Biomaterials, vol. 27, pp. 5892–5900, 2006. View at Publisher · View at Google Scholar · View at Scopus
  21. F. Bai, Z. Wang, J. Lu et al., “The correlation between the internal structure and vascularization of controllable porous bioceramic materials in vivo: a quantitative study,” Tissue Engineering Part A, vol. 16, pp. 3791–3803, 2010. View at Publisher · View at Google Scholar · View at Scopus
  22. T. Albrektsson and C. Johansson, “Osteoinduction, osteoconduction and osseointegration,” European Spine Journal, vol. 10, Supplement 2, pp. S96–S101, 2001. View at Google Scholar
  23. R. Uklejewski, M. Winiecki, and P. Rogala, “On the structural-adaptive compatibility of bone with porous coated implants on the base of the traditional one-phase and the modern two-phase poroelastic biomechanical model of bone tissue,” Engineering of Biomaterials, vol. 9, pp. 1–13, 2006. View at Google Scholar
  24. M. Winiecki, The investigation on the microgeometrical constructional properties of porous endoosseous implants and the influence of these properties on the strength of the bone-implant model fixation (in Polish), [Ph.D. Thesis], Poznan University of Technology, Poznan, 2006.
  25. R. Uklejewski, M. Winiecki, P. Rogala, J. Mielniczuk, A. Auguściński, and W. Stryła, “Structural and biomechanical biocompatibility in bone-porous implant fixation region – on the basis of two-phase poroelastic biomechanical model of bone tissue,” Engineering of Biomaterials, vol. 10, pp. 93–95, 2007. View at Google Scholar
  26. R. Uklejewski, M. Winiecki, J. Mielniczuk, P. Rogala, and A. Auguściński, “The poroaccessibility parameters for three-dimensional characterization of orthopedic implants porous coatings,” Metrology and Measurement Systems, vol. 15, pp. 215-216, 2008. View at Google Scholar
  27. R. Uklejewski, W. Winiecki, P. Rogala, and W. Radomski, “The characterization of structural and osteoinductive properties of orthopaedic implants porous coatings with the set of 3D poroaccesibility parameters,” in Proceedings of the 13th International Conference on Metrology and Properties of Engineering Surfaces, pp. 103–107, Twickenham Stadium, London, UK, 2011.
  28. R. Uklejewski, M. Winiecki, and P. Rogala, “Computer aided stereometric evaluation of porostructural-osteoconductive properties of intra-osseous implants porous coatings,” Metrology and Measurement Systems, vol. 20, pp. 427–438, 2013. View at Google Scholar
  29. J. Mielniczuk, P. Rogala, R. Uklejewski et al., “Modelling of the needle-palisade fixation system for the total hip resurfacing arthroplasty endoprostheses,” Transactions of the VŠB - Technical University of Ostrava, Metallurgical Series, vol. 51, pp. 160–166, 2008. View at Google Scholar
  30. R. Uklejewski, P. Rogala, M. Winiecki, A. Kędzia, and P. Ruszkowski, “Preliminary results of implantation in animal model and osteoblast culture evaluation of prototypes of biomimetic multispiked connecting scaffold for noncemented stemless resurfacing hip arthroplasty endoprostheses,” BioMed Research International, vol. 2013, Article ID 689089, 10 pages, 2013. View at Publisher · View at Google Scholar · View at Scopus
  31. A. F. Brooker and J. P. Collier, “Evidence of bone ingrowth into a porous-coated prosthesis,” Journal of Bone and Joint Surgery (American Volume), vol. 66, pp. 619–621, 1984. View at Google Scholar