Table of Contents Author Guidelines Submit a Manuscript
Applied Bionics and Biomechanics
Volume 2017, Article ID 6858720, 8 pages
https://doi.org/10.1155/2017/6858720
Review Article

Analysis of Drag Reduction Methods and Mechanisms of Turbulent

1College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou 310014, China
2School of Energy and Power Engineering, Jiangsu University, Jiangsu, Zhenjiang 212013, China

Correspondence should be addressed to Gu Yunqing; nc.ude.tujz@gniqnuyug

Received 30 April 2017; Accepted 20 August 2017; Published 18 September 2017

Academic Editor: Saurabh Das

Copyright © 2017 Gu Yunqing et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Y. B. Li, Y. Q. Gu, J. G. Mou, S. H. Zheng, and L. F. Jiang, “Current research status of biomimetic drag-reducing antifouling paints with low surface energy,” Materials Protection, vol. 47, no. 6, pp. 48–51, 2014. View at Google Scholar
  2. J. L. Xu, X. R. Lai, B. Wang, L. Xu, and G. H. Liu, “Flow patterns and parameters of micro bubble generation in a flow focusing device,” Nanotechnology and Precision Engineering, vol. 10, no. 1, pp. 59–63, 2012. View at Google Scholar
  3. J. F. Sun, Y. Zhou, J. Li, X. S. Liu, and J. Y. Lan, “The design of testing equipment for drag resistance effect based on differential principle and the study of drag reduction characteristic of coatings,” Lubrication Engineering, vol. 7, pp. 120–122, 2006. View at Google Scholar
  4. Y. R. Sun and Z. D. Dai, “Bionics today and tomorrow,” Acta Biophysica Sinica, vol. 23, no. 2, pp. 109–114, 2007. View at Google Scholar
  5. Z. Y. Zhao and S. P. Dong, “Application of micro-grooved surface for turbulent drag reduction,” Journal of Petrochemical Universities, vol. 17, no. 3, pp. 76–79, 2004. View at Google Scholar
  6. Y. Q. Gu, J. G. Mou, D. S. Dai et al., “Characteristics on drag reduction of bionic jet surface based on earthworm’s back orifice jet,” Acta Physica Sinica, vol. 64, no. 2, article 024701, 2015. View at Google Scholar
  7. Y. X. Lu, “Significance and progress of bionics,” Journal of Bionic Engineering, vol. 1, no. 1, pp. 1–3, 2004. View at Google Scholar
  8. H. Y. Wang, G. W. He, M. F. Xia, F. J. Ke, and Y. L. Bai, “Multiscale coupling in complex mechanical systems,” Chemical Engineering Science, vol. 59, no. 8-9, pp. 1677–1686, 2004. View at Publisher · View at Google Scholar · View at Scopus
  9. E. T. Liu, “Systems biology, integrative biology, predictive biology,” Cell, vol. 121, no. 4, pp. 505-506, 2005. View at Publisher · View at Google Scholar · View at Scopus
  10. G. Neuweiler and E. Covey, The Biology of Bats, Oxford University Press, Oxford, 2000.
  11. J. R. Sun and Z. D. Dai, “Bionics of non-smooth surface I,” Progress in Natural Science, vol. 18, no. 3, pp. 241–246, 2008. View at Google Scholar
  12. P. Ball, “Engineering shark skin and other solutions,” Nature, vol. 400, no. 6744, pp. 507–509, 1999. View at Google Scholar
  13. J. R. Sun and Z. D. Dai, “Bionics of non-smooth surface II,” Progress in Natural Science, vol. 18, no. 7, pp. 727–733, 2008. View at Google Scholar
  14. T. Shelley, “Worms show way to efficiently move,” Eureka, vol. 24, no. 1, pp. 28-29, 2004. View at Google Scholar
  15. L. Q. Ren, J. Tong, J. Q. Li, and B. C. Chen, “Soil adhesion and biomimetics of soil-engaging components: a review,” Journal of Agricultural Engineering Research, vol. 79, no. 3, pp. 239–263, 2001. View at Google Scholar
  16. F. E. Fish, “The myth and reality of Gray’s paradox: implication of dolphin drag reduction for technology,” Bioinspiration & Biomimetics, vol. 1, no. 2, pp. R17–R25, 2006. View at Publisher · View at Google Scholar · View at Scopus
  17. D. B. Huang, X. H. Deng, and Y. J. Wang, “Numerical simulation study of turbulent drag reduction over ribelt surfaces of tubes,” Journal of Hydrodynamics, Series A, vol. 20, no. 1, pp. 101–105, 2005. View at Google Scholar
  18. K. S. Chio, “European drag-reduction research—recent developments and current status,” Fluid Dynamics Research, vol. 26, no. 5, pp. 325–330, 2000. View at Publisher · View at Google Scholar · View at Scopus
  19. J. J. Wang, S. L. Lan, and F. Y. Miao, “Drag-reduction characteristics of turbulent boundary layer flow over riblets surfaces,” Shipbuilding of China, vol. 42, no. 4, pp. 1–5, 2001. View at Google Scholar
  20. H. W. Yang and G. Gao, “Experimental study for turbulent drag reduction using a novel boundary control technique,” Acta Aeronautica Et Astronautica Sinica, vol. 18, no. 4, pp. 455–457, 1997. View at Google Scholar
  21. Y. B. Li, Z. D. Qiao, and Z. Q. Wang, “An experimental research of drag reduction using riblets for the Y-7 airplane,” Aerodynamic Experiment and Measurement & Control, vol. 9, no. 3, pp. 21–26, 1995. View at Google Scholar
  22. A. J. Cooper and P. W. Carpenter, “The stability of rotating-disc boundary-layer flow over a compliant wall. Part 2. Absolute instability,” Journal of Fluid Mechanics, vol. 350, pp. 261–270, 1997. View at Publisher · View at Google Scholar
  23. Y. Yao, C. J. Lu, T. Si, and K. Zhu, “Water tunnel experimental investigation on the drag reduction characteristics of the traveling wavy wall,” Journal of Hydrodynamics, Series B, vol. 23, no. 1, pp. 65–70, 2011. View at Publisher · View at Google Scholar · View at Scopus
  24. F. Guo, W. C. Dong, and Y. Bi, “The theoretical study on influencing factors to resistance reduction of a gyroidal object by microbubbles,” Journal of Harbin Engineering University, vol. 31, no. 11, pp. 1443–1449, 2010. View at Google Scholar
  25. K. Mohanarangam, S. C. P. Cheung, J. Y. Tu, and L. Chen, “Numerical simulation of micro-bubble drag reduction using population balance model,” Ocean Engineering, vol. 36, no. 11, pp. 863–872, 2009. View at Publisher · View at Google Scholar · View at Scopus
  26. N. K. Madavan, S. Deutsch, and C. L. Merkle, “Reduction of turbulent skin friction by microbubbles,” Physics of Fluids, vol. 27, no. 2, pp. 356–363, 1984. View at Publisher · View at Google Scholar
  27. J. Q. Wang, Elementary Study on Wall Shin Friction Reduction of Symmetrical Body by Microbubbles in Boundary Layer of Fluid, Tianjin University, Tianjin, 2004.
  28. A. Baron and M. Quadrio, “Turbulent drag reduction by spanwise wall oscillations,” Applied Scientific Research, vol. 55, pp. 311–326, 1996. View at Publisher · View at Google Scholar · View at Scopus
  29. J. T. Wei and B. Ni, “The drag reduction research of the additives in the heating network,” Journal of Changchun Institute of Technology, vol. 12, no. 3, pp. 48–51, 2011. View at Google Scholar
  30. D. W. Bechert, M. Bruse, W. V. Hage, J. T. Van der Hoeven, and G. Hoppe, “Experiments on drag-reducing surfaces and their optimization with an adjustable geometry,” Journal of Fluid Mechanics, vol. 338, no. 5, pp. 59–87, 1997. View at Publisher · View at Google Scholar
  31. Y. R. Qun and Q. Si, “Study on heat transfer and drag reduction in flow boiling of polymer additives,” Chemical Engineering, vol. 29, no. 5, pp. 22–25, 2001. View at Google Scholar
  32. H. L. Petrie, S. Deutsch, T. A. Brungart, and A. A. Fontain, “Polymer drag reduction with surface roughness in flat-plate turbulent boundary layer flow,” Experiments in Fluids, vol. 35, no. 1, pp. 8–23, 2003. View at Publisher · View at Google Scholar · View at Scopus
  33. K. S. Choi, “Near-wall structure of a turbulent boundary layer with riblets,” Journal of Fluid Mechanics, vol. 208, no. 6, pp. 417–458, 1989. View at Publisher · View at Google Scholar · View at Scopus
  34. K. W. Li and Q. X. Lian, “A review on drag reduction of boundary layer,” Journal of Beijing Uinversity of Aeronautics and Astronautics, vol. 4, pp. 68–76, 1991. View at Google Scholar
  35. X. Q. Hao, L. Wang, Y. C. Ding, G. H. Ye, Z. Y. He, and B. H. Lu, “Study on the dray reduction of the superhydrophobic surface,” Lubrication Engineering, vol. 34, no. 9, pp. 25–28, 2009. View at Google Scholar
  36. X. L. Wang, Q. F. Di, R. L. Zhang, and C. Y. Gu, “Surface slip effect and its application to drag reduction technology,” Advances in Mechanics, vol. 40, no. 3, pp. 241–249, 2010. View at Google Scholar
  37. R. S. Voronov, D. V. Papavassiliou, and L. L. Lee, “Slip length and contact angle over hydrophobic surfaces,” Chemical Physics Letters, vol. 441, no. 4-6, pp. 273–276, 2007. View at Publisher · View at Google Scholar · View at Scopus
  38. G. D. Bixler and B. Bhushan, “Shark skin inspired low-drag microstructured surfaces in closed channel flow,” Journal of Colloid & Interface Science, vol. 393, no. 1, p. 384, 2013. View at Publisher · View at Google Scholar · View at Scopus
  39. C. Lee and C. J. Kim, “Underwater restoration and retention of gases on superhydrophobic surfaces for drag reduction,” Physical Review Letters, vol. 106, no. 1, article 014502, 2011. View at Publisher · View at Google Scholar · View at Scopus
  40. B. Srivastava, “Lateral jet control of a supersonic missile: computational and experimental comparisons,” Journal of Spacecraft & Rockets, vol. 35, no. 2, pp. 140–146, 1998. View at Publisher · View at Google Scholar
  41. W. F. Reif, “Morphogenesis and function of the squamation in sharks,” Neues Jahrbuch für Geologie und Paläontologie, Abhandlungen, vol. 164, pp. 172–183, 1982. View at Google Scholar
  42. F. Li, G. Zhao, W. X. Liu, and Z. Z. Sun, “Simulation on flow control and drag reduction with bionic jet surface,” Journal of Basic Science and Engineering, vol. 22, no. 3, pp. 574–583, 2014. View at Google Scholar