Research Article
Additive Manufacturing Techniques for the Reconstruction of 3D Fetal Faces
Table 1
Printing parameters.
| Parameters | Values/settings |
| Material | PLA, ABS | Quality: layer height | 0.1–0.2 mm | Shell: wall thickness | 1 mm | Infill | 20% | Printing temperature | 215°C (PLA)–255°C (ABS) | Diameter | 1.75 mm | Flow | 100% | Print speed | 400 mm/s | Travel speed | 120 mm/s | Build plate adhesion type | Raft | Raft air gap 0.3 mm | Initial layer Z overlap 0.15 mm | Raft top layers 2 |
|
|