Applied Bionics and Biomechanics / 2018 / Article / Fig 1

Research Article

Towards Subject-Specific Strength Training Design through Predictive Use of Musculoskeletal Models

Figure 1

Simulation illustration (top row) of the model performing the flexion/extension (a) and the abduction/adduction (b) movements, including the 0° position of the external force (green arrow) applied to the right leg of the model. Schematic representations of the different loading conditions used in the simulation are shown in the bottom row, including rotational external force (green), which was rotated incrementally in 15° steps and three different hip rotation configurations; externally rotated (blue), neutrally rotated (grey), and internally rotated (orange).