Table of Contents Author Guidelines Submit a Manuscript
Applied Bionics and Biomechanics
Volume 2019, Article ID 7169034, 11 pages
https://doi.org/10.1155/2019/7169034
Research Article

Anthropomorphism Index of Mobility for Artificial Hands

Grupo de Biomecánica y Ergonomía, Departamento de Ingeniería Mecánica y Construcción, Universitat Jaume I (UJI), 12071, Spain

Correspondence should be addressed to Immaculada Llop-Harillo; se.iju@polli

Received 21 March 2019; Accepted 17 June 2019; Published 28 July 2019

Guest Editor: Francesca Cordella

Copyright © 2019 Immaculada Llop-Harillo et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. J. T. Belter, J. L. Segil, A. M. Dollar, and R. F. Weir, “Mechanical design and performance specifications of anthropomorphic prosthetic hands: a review,” Journal of Rehabilitation Research and Development, vol. 50, no. 5, pp. 599–618, 2013. View at Publisher · View at Google Scholar · View at Scopus
  2. J. ten Kate, G. Smit, and P. Breedveld, “3D-printed upper limb prostheses: a review,” Disability and Rehabilitation. Assistive Technology, vol. 12, no. 3, pp. 300–314, 2017. View at Publisher · View at Google Scholar · View at Scopus
  3. T. Feix, J. Romero, C. H. Ek, H. B. Schmiedmayer, and D. Kragic, “A metric for comparing the anthropomorphic motion capability of artificial hands,” IEEE Transactions on Robotics, vol. 29, no. 1, pp. 82–93, 2013. View at Publisher · View at Google Scholar · View at Scopus
  4. M. V. Liarokapis, P. K. Artemiadis, and K. J. Kyriakopoulos, “Quantifying anthropomorphism of robot hands,” in 2013 IEEE International Conference on Robotics and Automation, pp. 2041–2046, Karlsruhe, Germany, May 2013. View at Publisher · View at Google Scholar · View at Scopus
  5. Y. Liu, D. Yang, L. Jiang, and H. Liu, “A synthetic framework for evaluating the anthropomorphic characteristics of prosthetic hands,” in 2015 IEEE International Conference on Advanced Intelligent Mechatronics (AIM), pp. 877–884, Busan, South Korea, July 2015. View at Publisher · View at Google Scholar · View at Scopus
  6. L. Birglen, T. Laliberté, and C. Gosselin, Underactuated Robotic Hands, Springer Tracts in Advanced Robotics book series (STAR, volume 40), Springer, 2008. View at Publisher · View at Google Scholar
  7. M. W. Cornwall, “Prosthetics and patient management: a comprehensive clinical approach,” Physical Therapy, vol. 87, no. 4, p. 482, 2007. View at Publisher · View at Google Scholar
  8. K. E. Yancosek and D. R. Mullineaux, “Stability of handwriting performance following injury-induced hand-dominance transfer in adults: a pilot study,” Journal of Rehabilitation Research and Development, vol. 48, no. 1, pp. 59–68, 2011. View at Publisher · View at Google Scholar · View at Scopus
  9. V. Gracia-Ibáñez, J. L. Sancho-Bru, and M. Vergara, “Relevance of grasp types to assess functionality for personal autonomy,” Journal of Hand Therapy, vol. 31, no. 1, pp. 102–110, 2018. View at Publisher · View at Google Scholar · View at Scopus
  10. V. Gracia Ibañez, Contribution to hand functional assessment based on its kinematics, Universitat Jaume I, Castelló de la Plana, 2016.
  11. World Health Organization, Towards a common language for functioning, disability and health ICF the International Classification of Functioning, Disability and Health, World Heal. Organ, Geneva, 2002.
  12. I. Llop-Harillo, A. Pérez-González, and V. Gracia-Ibáñez, Anthropomorphism index of mobility for hand prostheses, XXVI Congress of the International Society of Biomechanics, 2017.
  13. M. Vergara, M. J. Agost, and V. Gracia-Ibáñez, “Dorsal and palmar aspect dimensions of hand anthropometry for designing hand tools and protections,” Human Factors and Ergonomics in Manufacturing & Service Industries, vol. 28, no. 1, pp. 17–28, 2018. View at Publisher · View at Google Scholar · View at Scopus
  14. B. Calli, A. Walsman, A. Singh, S. Srinivasa, P. Abbeel, and A. M. Dollar, “Benchmarking in manipulation research: using the Yale-CMU-Berkeley object and model set,” IEEE Robotics and Automation Magazine, vol. 22, no. 3, pp. 36–52, 2015. View at Publisher · View at Google Scholar · View at Scopus
  15. V. Gracia-Ibáñez, M. Vergara, J. H. Buffi, W. M. Murray, and J. L. Sancho-Bru, “Across-subject calibration of an instrumented glove to measure hand movement for clinical purposes,” Computer Methods in Biomechanics and Biomedical Engineering, vol. 20, no. 6, pp. 587–597, 2017. View at Publisher · View at Google Scholar · View at Scopus
  16. V. Gracia-Ibáñez, M. Vergara, J. L. Sancho-Bru, M. C. Mora, and C. Piqueras, “Functional range of motion of the hand joints in activities of the International Classification of Functioning, Disability and Health,” Journal of Hand Therapy, vol. 30, no. 3, pp. 337–347, 2017. View at Publisher · View at Google Scholar · View at Scopus
  17. V. Patel, M. Burns, R. Chandramouli, and R. Vinjamuri, “Biometrics based on hand synergies and their neural representations,” IEEE Access, vol. 5, pp. 13422–13429, 2017. View at Publisher · View at Google Scholar · View at Scopus
  18. I. A. Kapandji, The Physiology of the Joints: Upper Limb, Churchill Livingstone, 1982.
  19. J. L. Sancho-Bru, Modèl biomecànic de la mà orientat al disseny d’eines manuals, Universitat Jaume I, 2000.
  20. D. G. Ullman, The Mechanical Design Process, McGraw-Hill, 4th edition, 2010.
  21. I. Llop-Harillo and A. Pérez-González, “System for the experimental evaluation of anthropomorphic hands. Application to a new 3D-printed prosthetic hand prototype,” International Biomechanics, vol. 4, no. 2, pp. 50–59, 2017. View at Publisher · View at Google Scholar · View at Scopus
  22. I. Llop-Harillo, A. Pérez-González, and J. Cantero-Ramis, “Analysis of motion synergies in grasping tasks for a 6-DOF tendon-driven prosthetic hand,” in 16th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering and 4th Conference on Imaging and Visualization, New York, 2019.
  23. J. Zuniga, D. Katsavelis, J. Peck et al., “Cyborg beast: a low-cost 3d-printed prosthetic hand for children with upper-limb differences,” BMC Research Notes, vol. 8, no. 1, p. 10, 2015. View at Publisher · View at Google Scholar · View at Scopus
  24. Gyrobot, “Flexy-Hand 2,” 2014, March 2019, https://www.thingiverse.com/thing:380665. View at Google Scholar
  25. P. Weiner, J. Starke, F. Hundhausen, J. Beil, and T. Asfour, “The KIT prosthetic hand: design and control,” in 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), Madrid, Spain, October 2018. View at Publisher · View at Google Scholar · View at Scopus
  26. Open Bionics, “Open Bionics hands,” 2018, March 2019, https://openbionicslabs.com/downloads. View at Google Scholar
  27. Touch Bionics, “Touch Bionics products,” 2019, March 2019, http://touchbionics.com/products. View at Google Scholar
  28. Ottobock, “Ottobock myoelectric prosthetics,” 2017, March 2019, https://www.ottobockus.com/prosthetics/upper-limb-prosthetics/solution-overview/myoelectric-prosthetics/. View at Google Scholar
  29. I. Gaiser, S. Schulz, A. Kargov et al., “A new anthropomorphic robotic hand,” in Humanoids 2008 - 8th IEEE-RAS International Conference on Humanoid Robots, pp. 418–422, Daejeon, South Korea, December 2008. View at Publisher · View at Google Scholar · View at Scopus
  30. Barrett Technology, “BarrettHand,” March 2019, https://www.barrett.com/about-barretthand.
  31. H. Liu, K. Wu, P. Meusel et al., “Multisensory five-finger dexterous hand: the DLR/HIT hand II,” in 2008 IEEE/RSJ International Conference on Intelligent Robots and Systems, Nice, France, September 2008. View at Publisher · View at Google Scholar · View at Scopus
  32. Shadow Robot Company, “Shadow dexterous hand,” 2019, March 2019, https://www.shadowrobot.com/products/dexterous-hand/. View at Google Scholar
  33. M. Controzzi, M. D'Alonzo, C. Peccia, C. M. Oddo, M. C. Carrozza, and C. Cipriani, “Bioinspired fingertip for anthropomorphic robotic hands,” Applied Bionics and Biomechanics, vol. 11, no. 1-2, 38 pages, 2014. View at Publisher · View at Google Scholar
  34. M. Ceccarelli, N. E. N. Rodríguez, G. Carbone, and C. Lopez-Cajùn, “An optimal design of driving mechanism in a 1 degree of freedom (d.o.f.) anthropomorphic finger,” Applied Bionics and Biomechanics, vol. 2, no. 2, pp. 103–110, 2005. View at Publisher · View at Google Scholar
  35. F. J. Andrés, A. Pérez-González, C. Rubert, J. Fuentes, and B. Sospedra, “Comparison of grasping performance of tendon and linkage transmission systems in an electric-powered low-cost hand prosthesis,” Journal of Mechanisms and Robotics, vol. 11, no. 1, article 011018, 2018. View at Publisher · View at Google Scholar · View at Scopus
  36. I. Llop-Harillo, V. Gracia-Ibáñez, and A. Pérez-González, “Analysis of anthropometric dimensions and joints range of motion of the human hand for application to the design of hand prostheses,” in 8th World Congress on Biomechanics, 2018.